Boral Roofing Nationwide | Barrett & Sons Construction

Boral Roofing: The Los Angeles Owner’s Guide

If you own a home with Boral roofing in Los Angeles and a tile has cracked, a ridge cap has shifted, or a section of underlayment is showing through, we can match the part and install it. Installed Boral tile repair in Los Angeles runs $710 to $2,950 depending on tile count, roof slope, and whether the underlayment underneath needs work. Most owners discover a problem after a rainy week or a Santa Ana wind event: a tile ends up in the yard, a leak shows up on the ceiling, or the roof just starts looking uneven from the curb.

Call (877) 610-1318

We’re an independent roofing contractor in Los Angeles that works on Boral roofs regularly. We’re not owned by Boral and we don’t pretend to be. What we do is keep the common Boral profiles, ridge caps, and barrel tiles on hand or sourced same-week, so you’re not waiting a month for a special-order part while the exposed underlayment takes on weather.

Which Boral Models This Applies To

Boral is a massive name in concrete and clay roof tile, and Los Angeles has thousands of homes wearing these roofs. The compatibility question matters because Boral makes distinct tile profiles, and a “flat” tile from one line will not seat correctly against a “barrel” tile from another. The common residential profiles we handle in Los Angeles include Boral’s flat shake-style tiles, their one-piece and two-piece barrel tiles (sometimes called mission profile), and their slate-look concrete tiles. Each profile has its own ridge cap geometry, and mixing caps from a different series is where we see DIY patch jobs go wrong on Los Angeles hillsides.

Here’s the compatibility gotcha: Boral’s concrete tiles are not interchangeable with clay tile trim from a different manufacturer just because the color roughly matches. The water channel and nesting lug spacing differ by a few millimeters, and those millimeters are what keep wind-driven rain out. When we match a Boral tile, we pull the tile profile dimensions, not just a color code. If the original tile is still made, we order Boral OEM. If that profile has been discontinued or the lead time is unreasonable, we’ll tell you which quality aftermarket equivalent actually matches the lugs and seat depth, and we’ll show you why before we put it on the roof.

Signs Your Boral Roofing Is Failing

• Cracked or broken tiles that show a lighter-colored core. Boral concrete tiles have a colored surface layer. When that layer chips away, water gets into the porous core, and freeze-thaw cycles in Los Angeles’ colder pockets (parts of the Valley get real frost) widen the crack. Hairline cracks turn into full breaks.
• Missing ridge caps after a Santa Ana wind. Ridge caps sit at the highest point of the roof and take the most direct wind load. We see them in Los Angeles yards after every big wind season. The fix is not just a new cap; the mortar or adhesive bed has to be redone or the next cap goes the same way.
• Tiles sliding or sagging out of line. This usually means the fasteners attaching the tiles to the batten have corroded, or the battens themselves are rotting in shaded roof areas. In Los Angeles’ marine layer zone, shaded north-facing slopes rot battens faster than people expect.
• Staining inside the attic or along exterior walls. That’s underlayment failure. The Boral tile on top can look fine while the waterproof layer underneath has aged out. In Los Angeles, the dry rot moves fast once it starts. Average underlayment service life here is 20 to 30 years, shorter on slopes that face full afternoon sun.
• Granular residue in gutters after every rain. Concrete tile should not be losing surface material at a visible rate. It signals surface erosion from acid rain or from a poor-quality original tile. Once the surface erodes, the tile absorbs more water, which accelerates the cycle.

Replacement Cost & What’s Included

The price range comes down to three things: how many tiles and trim pieces need replacement, what condition the underlayment and battens are in, and how steep or cut-up your roof is. A two-story Los Angeles hillside home with valleys, hips, and a 6:12 slope costs more to access safely than a single-story ranch. Every quote from us is line-itemed: parts, labor, underlayment, and disposal separate, and any change gets written on a change order before we touch it. The 90-Day Done Right Promise applies to every Boral repair we do.

DIY or Call Us?

If you want to check things yourself before calling, get a pair of binoculars and look from the ground. You can spot missing caps, cracked tiles, and out-of-line tile runs that way without setting foot on a ladder. What you should not do is walk a concrete tile roof to inspect it. Boral tile is load-rated when properly supported, but one wrong step on an unsupported tile edge will snap it and create the very repair you were trying to avoid. And if the roof is steep over a single story, the fall is just as dangerous as a taller one.

The safer move in Los Angeles is a roof inspection from someone who works on these roofs every week. We’ll tell you what’s broken, what’s still solid, and what it costs to fix, all in writing before work starts. Call (877) 610-1318 and we’ll set a time.

FAQs