Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterFast, Reliable Kitchen Remodeling Across Pelican Bay
A full kitchen remodel in Pelican Bay, Florida typically runs $14,000-$45,000, depending on cabinet grades, countertop material, and whether the job needs wind-load upgrades for older condo or coastal homes. Most projects in Pelican Bay take 6 to 10 weeks from first cabinet removal to final inspection. If you’re in a Gulf-front building or a Foundation-governed single-family home, your remodel won’t just need Collier County permits - it needs the Pelican Bay Foundation’s Architectural Review Committee sign-off too. We know both tracks well. Call (877) 610-1318 for a free estimate, and we’ll walk you through exactly what your building requires before you spend a dime.
Why Barrett & Sons Construction Is Pelican Bay’s Preferred Kitchen Remodeling Company
Tom Barrett started this company in 1998, and he still answers his own phone. That matters in Pelican Bay, where homeowners and condo boards have been burned by contractors who quote one number and deliver another. We publish Tom’s name, license number, and address - look it up. You’ll find it verifiable, which is more than most companies can say after the first meeting.
Our crews have worked inside Pelican Bay long enough to know the Foundation’s ARC submittal calendar, the pre-approved material palette, and which condo towers are cycling through SB 4-D structural and mechanical renovations. That means we don’t waste your weeks on a denial letter. We get informal Foundation staff feedback before we finalize drawings. Then we pull the Collier County permit. Two tracks, one organized process.
Every kitchen remodel we complete in Pelican Bay carries the 90-Day Done Right Promise in writing. If something’s not done right, one call brings Tom back. No fine print, no runaround. That promise is why our Pelican Bay customers refer us to neighbors on Gulf Park Drive, Bay Colony, and the high-rise corridor along the Gulf.
Our Kitchen Remodeling Services in Pelican Bay
Full Kitchen Remodeling
A full kitchen remodel in Pelican Bay means taking the room to the studs and rebuilding it right. We handle layout changes, load-bearing wall assessments, electrical panel upgrades, plumbing rough-in, drywall, flooring, cabinetry, countertops, backsplash, and finish work - with permits pulled and inspections signed on every eligible job. For older 1980s and 1990s condos along the Gulf corridor, we also check for the corrosion and wind-load issues that aging coastal buildings hide behind drywall.
Cabinets & Countertops
Cabinet and countertop work is the heart of most Pelican Bay kitchen updates. We install KraftMaid cabinetry and Cambria quartz, and we match the Pelican Bay Foundation’s pre-approved material palette so your ARC review doesn’t stall. Standard particleboard boxes and non-impact hardware won’t survive salt air the way a quality install with stainless steel connectors will. That’s the difference between a kitchen that looks good for three years and one that holds up for twenty.
Backsplash
Backsplash work in Pelican Bay runs $800-$2,500 on most jobs, and it’s one of the fastest ways to refresh a kitchen without ripping out cabinets. We do glass, ceramic, porcelain, and natural stone - always with the right waterproofing and sealant spec for a humid, salt-laden environment. Grout failure from cheap mastic is common in coastal kitchens; we use materials that are rated to stay bonded.
Tile & Flooring and Kitchen Design & Layout
Tile and flooring in Pelican Bay kitchens need to handle humidity, tracked sand, and the occasional storm-driven water intrusion. We’ll help you pick a product that looks right and performs right. On layout, we work with your existing footprint - many older Pelican Bay condos have fixed plumbing chases and concrete slabs, so the design has to respect what the building structure will and won’t allow. We’ll draw it, price it, and submit it to the Foundation before we open a single wall.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pelican Bay
We install brands you can research: KraftMaid and Cambria in kitchens, Schluter for waterproofing and tile systems, and Grohe for fixtures. These aren’t mystery brands off a van. When you spec Schluter underlayment under tile in a high-humidity Gulf kitchen, you’re buying a documented installation system that holds up to Florida conditions - and that documentation matters when you file an insurance claim later. We keep materials staged and ready for Pelican Bay jobs, so lead times don’t add weeks to your schedule.
Common Kitchen Remodeling Problems We See in Pelican Bay Homes
- ARC denial letters from missing the Foundation’s submittal calendar. Pelican Bay’s Architectural Review Committee meets on a set schedule, and if your material spec lands late, you lose a full review cycle. We submit early and confirm the pre-approved palette before finalizing anything.
- Non-impact-rated windows and doors in V-zone or AE flood-designated parcels. FEMA designations along the Pelican Bay coast mean standard windows can fail wind-load inspection. A compliant quote includes impact-rated glazing from day one - a cheap quote won’t, and you’ll pay for that mistake twice.
- Corroded fasteners in interior framing near Gulf air. Salt-laden humidity eats unprotected metal fasteners fast. We spec stainless steel or hot-dipped galvanized connectors on structural anchors, cabinet mounting, and island frames. The wrong fastener voids manufacturer warranties and can sink an insurance audit.
- Aging 1980s condo mechanical systems that conflict with new kitchen layouts. Many Pelican Bay towers built in the 1980s and 1990s have original electrical panels and plumbing chases that can’t handle modern kitchen loads. We identify these before we design around them, not after the cabinets arrive.
Pricing for Kitchen Remodeling in Pelican Bay, FL
Here’s what kitchen work actually costs in Pelican Bay right now. These are the numbers we quote from - written line items, not phone estimates that change at the door.
| Service | Typical Range in Pelican Bay |
|---|---|
| Kitchen Remodel | $14,000-$45,000 |
| Small Kitchen Remodel | $9,000-$20,000 |
| Cabinet Installation | $4,000-$13,000 |
| Countertop Installation | $2,000-$6,500 |
| Backsplash Installation | $800-$2,500 |
| Kitchen Island Installation | $3,000-$10,000 |
What moves the number: cabinet line, countertop material, whether you’re in a high-rise with elevator and hoist logistics, and whether your building requires impact-rated glazing or wind-load upgrades. Every allowance, every price change, every scope shift is a written change order before work happens. That’s non-negotiable at Barrett & Sons. Call (877) 610-1318 for a free line-item estimate.
We Also Serve Cities Near Pelican Bay
Our crews work throughout Collier County. If you’re in Naples Park, Naples, Golden Gate, or East Naples, you get the same Kitchen Remodeling team and the same 90-Day Done Right Promise. We schedule estimates across the county every week, and a live person still answers the phone when you call.
Serving Pelican Bay, FL - Our Local Coverage Area
We’re based in the Pelican Bay area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Kitchen Remodeling in Pelican Bay
Yes. Pelican Bay requires dual-track approval: Pelican Bay Foundation Architectural Review Committee sign-off plus a Collier County building permit. The Foundation’s ARC review covers aesthetics and material palette; the county permit covers code, wind-load, and floodplain compliance. Start with the Foundation - their review cycle can add two to four weeks, and if you miss their submittal calendar, you’ll wait another full cycle. Call (877) 610-1318 and we’ll map the timeline for your building before you commit.
It depends on your parcel’s FEMA designation, but kitchens in beachfront and near-coast Pelican Bay parcels commonly require impact-rated glazing built to Miami-Dade or Florida Building Code HVHZ standards, with design pressure ratings typically between ±50 and ±80 psf depending on exposure category. If your condo tower falls under post-Surfside SB 4-D structural requirements, your building’s engineer may set a higher bar. A compliant quote includes this spec from day one; a cheap one won’t mention it until inspection fails.
It can. Insurers in Florida increasingly look at documented wind-load and floodplain compliance when underwriting and settling claims. If your kitchen remodel’s inspection records show impact-rated glazing, stainless steel connectors, and flood-resistant assemblies, you have paperwork to support a premium review or a post-storm claim. If the work was done without permits or with substandard fasteners, the insurer can use that to reduce or deny a claim. We give you the documentation either way - Collier County sign-offs and Foundation ARC approval. Call (877) 610-1318 for specifics on your building.
The Foundation maintains a pre-approved material palette that dictates which cabinet door styles, finishes, and countertop materials pass ARC review. Your options may be limited to certain KraftMaid or Cambria lines, with specific hardware finishes and edge profiles. We know the current palette and submit materials that pass on the first cycle. Choosing a cabinet or stone that isn’t on the list means a denial letter, a re-submittal, and another few weeks of delay. Get informal Foundation feedback before you finalize - we do this on every job.
Pelican Bay sits directly on the Gulf, so the air carries persistent salt. Unprotected steel fasteners, screws, and connectors corrode within a few seasons, voiding manufacturer warranties and weakening structural anchors. That’s why we spec stainless steel or hot-dipped galvanized fasteners on interior framing, cabinet mounting, and island frames - even on jobs that aren’t strictly structural. Inland Collier County doesn’t face the same salt load, so that spec can be relaxed. In Pelican Bay, it’s not optional. Call (877) 610-1318 for an exact quote on your kitchen - estimates are always free.
Contact Barrett & Sons Construction in Pelican Bay
If you’re planning a kitchen remodel in Pelican Bay, start with a conversation. Call Tom Barrett’s team at (877) 610-1318. We’ll give you a written, line-item estimate, walk you through the Foundation ARC calendar and the Collier County permit process, and tell you exactly what your building’s wind-load and flood designation means for the work. No surprises at the end - because every price and every allowance is on paper before the first nail moves.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Pelican Bay with owner-operated remodeling since 1998.