Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterFast, Reliable Fence Installation Across Upland
Fence installation in Upland, CA typically runs $3,500 to $9,000 for a standard residential project, and we can usually have a crew on site within a week of your written estimate. We know Upland’s zoning quirks, its soil, and its wind. If you live off Euclid Avenue or up near Mountain Avenue in the 91784 foothills, you’re dealing with slope and fault-zone questions that a flatland fence company from Ontario never has to think about.
Our Fence Installation team has been building and repairing fences across the Inland Empire since 1998. We’re family-owned, Tom Barrett’s sons run the crews, and every job starts with a written scope and a real price. Call (877) 610-1318 for a free estimate in Upland.
Why Barrett & Sons Construction Is Upland’s Preferred Fence Installation Company
We’re not a franchise that sends strangers in rented vans. Tom Barrett founded Barrett & Sons Construction in 1998, and his sons are the ones who show up at your property line in Upland. When you call our office, a person answers, day or night. That matters when a Santa Ana wind takes out a section of fence at 2 a.m. and you want to talk to someone who actually knows your neighborhood.
Our reputation in Upland is built on what goes in writing before the first post hole is dug. Scope in writing. Allowances in writing. Change orders in writing. If the price changes at any point, you see it on paper and sign it before another nail moves. The permit inspector works for you, not for us, and we like it that way. Every eligible fence project in Upland gets the permits pulled and the inspection signed off, because the last contractor most of our customers used told them permits were optional. They aren’t.
Tom Barrett publishes his name, his address, and his license number. Look them up. Ask anyone on your street. And every job carries our written 90-Day Done Right Promise: if it’s not done right, Tom comes back and makes it right, one call.
Our Fence Installation Services in Upland
We handle the full range of residential and commercial fencing across Upland’s three ZIP codes: 91784, 91785, and 91786. Here are the services Upland homeowners call us about most, along with other projects like Kitchen Remodeling in Upland.
Privacy Fence
Wood privacy fences dominate south and central Upland, where post-war tract homes were built close together on former citrus-belt land. Most of what we tear out in 91786 is redwood or cedar that was set directly in Upland’s clay-heavy alluvial soil without proper drainage. We build privacy fences that last: pressure-treated kickboards, stainless steel brackets, and posts set above the soil line where groundwater collects.
Fence Repair
Wind damage, rot, and leaning posts keep our repair crews busy across Upland. On the hillside lots off Mountain Avenue and San Antonio Avenue in 91784, the combination of slope erosion and down-slope Santa Ana gusts beats up on fences faster than anywhere else in the city. We repair individual sections or replace full runs, and we’ll tell you honestly which one saves you money in the long run.
Aluminum Fence
Aluminum is popular in Upland’s newer hillside communities and around pools. But standard aluminum fence panels installed without mid-rail wind stiffeners rack and deform during the Santa Anas, especially on lots above 1,800 feet where gusts regularly exceed 60 mph. We spec stiffened panels and concrete-set posts on every sloped or exposed Upland property we estimate.
Vinyl Fence
Vinyl handles Upland’s dry heat well, but it still needs proper post depth and wind design. We see a lot of vinyl fences installed by out-of-town crews with posts set only 18 to 24 inches deep, which is nowhere near enough for Upland soil once the wind hits. We set deeper, use proper concrete footings, and warranty the work in writing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Upland
We carry and install premium fencing products that you can look up before you sign anything. That includes Quikrete concrete mixes for post footings, Oldcastle aggregates and drainage stone for fence lines on sloped lots in the Upland foothills, and Techo-Bloc paver options for fence-adjacent walkways and gate landings. Many of these same materials factor into our Upland Home Additions & ADU work as well. If you want a brand we don’t stock, we’ll order it and show you the invoice. No mystery brands off a van. And for Upland customers, we keep a local stock of common fence repair parts in our Inland Empire yard, which means faster turnaround when a latch fails or a panel needs replacement.
Common Fence Installation Problems We See in Upland Homes
Here’s what actually fails on Upland fences, based on nearly 30 years of pulling them apart.
- Post rot from clay soil: Untreated cedar or redwood posts set directly in Upland’s clay-heavy alluvial soil wick moisture and rot in five to seven years. This speeds up on north-slope lots where irrigation runoff collects at the base of the fence. We switch to hot-dip galvanized PostMaster steel posts set in concrete, which outlast any wood post.
- Corroded gates and latches: Standard zinc-plated gate hinges and latches corrode within two seasons in the pre-dawn marine air that pushes up the San Gabriel foothills into Upland. Gates sag, bind, and eventually snap. We use hot-dip galvanized or stainless hardware on every gate we install or repair in Upland.
- Wind-racked aluminum panels: Aluminum fence panels without mid-rail stiffeners rack and deform in Santa Ana conditions. This is common on exposed lots in the 91784 foothills. We always add wind blocking or stiffeners when the site calls for it.
- Slope-driven fence failure: Fences on sloped alluvial-fan lots in north Upland settle unevenly when posts are set to flatland standards. The fence leans, rails pop, and gates stop closing. Proper stepped or contoured installation with deep, concrete-set posts solves the problem before it starts.
Pricing for Fence Installation in Upland, CA
Fence installation in Upland runs from $3,500 to $9,000 for a typical single-family residential project. That range covers most privacy or vinyl fences on modest lots in south and central Upland. Larger properties, steeper slopes, and wind-rated specs on foothill lots in 91784 will push toward the middle and upper end.
Here’s how the main fence types break down in Upland’s market:
| Fence Type | Typical Upland Price Range |
|---|---|
| Vinyl Fence Installation | $3,500 - $9,000 |
| Aluminum Fence Installation | $4,000 - $10,000 |
These ranges cover standard materials and typical Upland lot conditions. A privacy fence on a 1970s slab-on-grade home in 91786 will land on the low end; a wind-rated aluminum perimeter on a steep hillside lot off Mountain Avenue in 91784, with concrete-set posts and a fault-zone verification, will go higher. We give you a written line-item quote before any work starts, so you know exactly what you’re paying and why. Call (877) 610-1318 for a free, no-trip-charge estimate anywhere in Upland.
We Also Serve Cities Near Upland
Our Fence Installation in Upland crews work throughout the city and into the neighboring communities where Upland homeowners have family, rental properties, and business locations. We regularly serve Upland plus Claremont, Montclair, Rancho Cucamonga, and Ontario. If your property is within a short drive of Upland, chances are we’re already working nearby.
Serving Upland, CA - Our Local Coverage Area
We’re based in the Upland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fence Installation in Upland
It depends on where exactly your fence line sits relative to the Cucamonga Fault. Many lots in the 91784 foothills fall within or adjacent to an Alquist-Priolo Earthquake Fault Zone, and any ground-disturbing work, including fence post excavation, may require a fault-rupture study before the city will issue a permit. This is a site-condition conversation we have with Upland homeowners all the time. Most flatland fence jobs in south Upland never trigger it. We handle the verification process for you and build the permit timeline into your written estimate, so there are no surprises. Call (877) 610-1318 and we’ll check your parcel before you commit to anything.
Upland’s clay-heavy alluvial soil holds water against fence posts. Ontario and Rancho Cucamonga have more mixed and sandy areas that drain faster, but much of Upland sits on dense clay layers that keep post bases wet through the rainy season and irrigation cycle. Add the pre-dawn marine air that pushes up the foothills, and untreated wood posts rot from the outside and the inside. The fix is simple: hot-dip galvanized steel posts set in concrete, not wood in dirt. If you’re tired of replacing posts every five years, call (877) 610-1318 for a free estimate on a post replacement that actually lasts.
Use hot-dip galvanized or stainless steel hardware, never standard zinc-plated, for a wooden privacy fence on a sloping Upland lot. Standard zinc corrodes fast in Upland’s foothill marine air and under irrigation spray. Stainless brackets and galvanized screws won’t rust, and adding a mid-span wind block between panels reduces racking during Santa Ana events. On a hillside lot off Mountain Avenue in 91784, our crew replaced a 40-year-old redwood privacy fence that had rotted at the ground line and leaned nearly 15 degrees downhill. We switched to hot-dip galvanized PostMaster steel posts set in concrete with stainless brackets. The permit required a fault-zone setback verification before the inspector signed off. We do that same spec on every similar Upland job. Call (877) 610-1318 for details.
In most cases, a steep Upland slope means the panel framing has to be stepped or contoured to the grade, because Alabama-style continuous top rails look awkward and leave gaps. The better solution is an aluminum system designed for stepped installation, with deep-set concrete footings on every post and mid-rail stiffeners to handle the wind. On slopes above 1,800 feet in Upland’s north end, we routinely add wind blocks. We’ll survey your actual grade and give you a written slope plan before any panel gets ordered. Call (877) 610-1318 for a free estimate.
Expect to pay roughly 15 to 30 percent more for a fence upgraded with hot-dip galvanized or stainless hardware, wind stiffeners, and deeper concrete footings compared to a standard inland-spec fence. So a $6,000 vinyl fence in south Upland might run $7,000 to $8,000 up on a windy hillside at or above 1,800 feet with marine-grade hardware and a wind-rated frame. The cheap spec costs more within a decade, because you’ll be replacing rotted posts or re-hanging gates within seven years. We show you both options in writing and let you decide. Call (877) 610-1318 to get your Upland-specific number.
Get Your Fence Project Started in Upland
If you’re in Upland and your fence is leaning, rotted, or blown out, we’ll come out, look at the actual site, and give you a written line-item estimate. No trip charge inside the county. No pressure, no gimmicks. Tom Barrett and his sons stand behind every fence we build, just as we do with our Bathroom Remodeling - Upland projects. Call Barrett & Sons Construction at (877) 610-1318 today to schedule your free estimate.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Upland and the Inland Empire since 1998.