Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Fence Installation Across Rosemont
Fence installation in Rosemont typically runs $3,500 to $9,000 for a standard vinyl fence, with wood and aluminum falling in a similar range depending on lot size and access. Most Rosemont jobs take two to four days once materials land on site, assuming Sacramento County approvals are in hand. If you’re off Bradshaw Road or tucked into one of the older 1950s tract neighborhoods, call us at (877) 610-1318 and we’ll walk you through what your specific yard will actually cost. We’re Barrett & Sons Construction, and we’ve been building fences in this unincorporated part of Sacramento County long enough to know exactly where the permit counter is, what the clay soil does to a post hole, and how to stage a job on a 50-foot-wide lot without blocking the street.
Why Barrett & Sons Construction Is Rosemont’s Preferred Fence Installation Company
Tom Barrett founded this company in 1998, and Tom’s sons run the crews. That’s not a marketing line, it’s just how we work. When you call about Fence Installation in Rosemont, you’re talking to someone who knows what a 1963 ranch on a slab foundation looks like, because we’ve built fences around dozens of them. Our Rosemont customers tend to mention two things: the written change orders before any price moves, and the fact that the same crew who shows up to measure is the crew who shows up to dig. That matters on a tight lot where a wrong post placement means cracking a walkway or hitting a utility line.
Every fence job here runs through Sacramento County’s Department of Community Development, not the City of Sacramento. We pull the permits, we schedule the inspections, and we don’t treat either as optional. The permit inspector works for you, not for me, which is exactly why we like having them on site. Our 90-Day Done Right Promise is written on every contract: if something shifts after that first wet winter, Tom comes back and makes it right. One call.
Our Fence Installation Services in Rosemont
Wood Fence
Cedar and redwood privacy fences dominate Rosemont’s older neighborhoods, and for good reason. The 1950s and 60s tract homes look right with a 6-foot redwood fence along the property line. We build these with galvanized steel posts set into the clay, not just wood posts dropped in a hole. In Rosemont, a wood fence that heaves after the first winter is usually a post-depth problem, not a wood problem. We account for that from the start. Most wood fences in Rosemont run $3,500 to $9,000 depending on linear footage and whether you need custom gates.

Chain Link Fence
For side yards, dog runs, and properties where budget or visibility matters, chain link is still the most practical option in Rosemont. It goes in fast, holds up to the Sacramento Valley sun, and doesn’t mind the clay soil as long as posts are set below the movement zone. We install galvanized and powder-coated chain link with proper tension wire and gate hardware that won’t sag. Chain link is also the most common fence type for Rosemont homeowners who need a secure enclosure while they figure out a longer-term landscaping plan.

Vinyl Fence
Vinyl fencing works well in Rosemont’s climate because it doesn’t warp in the summer heat or soak up winter rain, but it has to be installed with the same soil considerations as everything else. We set vinyl posts in concrete below the heave line and use full-length rails so the panels don’t pop loose when the ground shifts. Vinyl is our most requested fence type for privacy needs on tighter lots, because it’s low-maintenance and comes in clean, uniform heights that look sharp on a 1960s street. Expect $3,500 to $9,000 for a typical Rosemont vinyl fence project.

Aluminum Fence
Aluminum fences show up most often in Rosemont around front yards and along Folsom Boulevard-facing properties, where homeowners want something that looks substantial without blocking sightlines. These are factory-finished, so there’s no painting, and the material handles Sacramento’s dry heat without issue. We size the post footings for the clay and use proper gate frames so the latch stays aligned year after year. Aluminum fence installation in Rosemont generally falls between $4,000 and $10,000.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Rosemont
We install what we’d put on our own property, which means you’ll see brands like Techo-Bloc and Cambridge Pavers on our hardscape-adjacent fence work, and Quikrete in our post-hole concrete mixes. We stock the common components for Rosemont jobs at our Sacramento yard, so a missing gate hinge or a short rail doesn’t mean a two-week wait. When you need a custom fence gate, we build around hardware that’s readily available, not exotic parts that take a month to ship. That keeps your timeline honest, which keeps our relationship honest.
Common Fence Installation Problems We See in Rosemont Homes
- Post holes dug to code minimums heave. Rosemont sits on Stockton-series expansive clay. A post set at 18 inches, which passes in some places, will shift by spring. We dig deeper and backfill with the right concrete mix, so the fence line stays straight through wet winters and 105-degree summers.
- Contractors pull City of Sacramento permits out of habit, only to be turned away. Rosemont is unincorporated. The county runs the permit counter, the setbacks, and the inspections. A contractor who doesn’t know that wastes two weeks and shows up confused. We don’t.
- Slab-on-grade foundations complicate corner post placement. Many Rosemont homes were built directly on a slab, which means a corner post set too close can crack the concrete or hit an underground utility. We locate utilities before digging and set posts clear of the slab edge.
- Tight tract lots leave no room for staging. Most Rosemont yards are 50 to 60 feet wide. Panels, concrete, and tools have to go somewhere. We stage in the driveway and walk materials through the side yard, so your street stays passable and your neighbors stay friendly.
Pricing for Fence Installation in Rosemont, CA
Here’s what you can expect for the two most common fence types in Rosemont right now:
| Fence Type | Typical Rosemont Price Range |
|---|---|
| Vinyl Fence Installation | $3,500 - $9,000 |
| Aluminum Fence Installation | $4,000 - $10,000 |
What moves the number? Linear footage is the big one, followed by gate count, access conditions, and whether we’re removing an old fence first. A 50-foot side-yard fence with one gate lands on the lower end. A 200-foot perimeter with two custom gates and limited street access lands higher. Every quote from us is a written line item, so you’ll see exactly where the money goes before you sign anything. Call (877) 610-1318 for a free estimate on your Rosemont fence project.
We Also Serve Cities Near Rosemont
Our crews work throughout the east Sacramento County area, so if you’re in La Riviera, Arden-Arcade, Fruitridge Pocket, or Florin, give us a call. We know the county permit track inside and out, and we’ll bring the same written-everything approach to your job. Learn more about Fence Installation in Rosemont or call directly for pricing.
Serving Rosemont, CA - Our Local Coverage Area
We’re based in the Rosemont area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fence Installation in Rosemont
In most cases, yes, and Sacramento County’s Department of Community Development is the issuing agency, not the City of Sacramento. Rosemont is unincorporated, which means every fence permit, setback check, and inspection runs through the county’s unincorporated-area track. We handle all of that for you, including the paperwork and scheduling the inspector. If you’d like us to check your specific property’s setback requirements, call (877) 610-1318 and we’ll pull up the county’s standards for your street.
On a 50-foot lot, we stage materials in your driveway and carry panels through the side yard rather than blocking the street or piling things against a neighbor’s wall. We did exactly this on a tight lot off Bradshaw Road, carrying a full 6-foot redwood privacy fence and custom gate through the side yard piece by piece. Access conditions like this are part of your quote, not a surprise fee later, because we measure the path before we price the job.
Stockton-series expansive clay expands when wet and contracts when dry, which is why shallow-set posts shift after the first wet winter. In Rosemont, we set posts below the active movement zone with a concrete collar designed for expansive soil, not a thin pour that cracks. The county inspector verifies post-hole depth before sign-off on permitted jobs, and we’ve never had a problem passing that check. For a fence that stays straight in Rosemont’s soil, call (877) 610-1318 and we’ll explain what depth your project actually needs.
It’s possible, and it’s exactly the kind of thing that trips up contractors who don’t work in Rosemont regularly. Properties near the Bradshaw Road and Folsom Boulevard corridors sometimes abut jurisdictional boundaries where Sacramento County’s unincorporated rules and neighboring city rules overlap. In those cases, a project can require two separate permit tracks with different setback tables and inspection sequences. We identify this before we quote, so there’s no surprise permit delay after work is scheduled.
Older tract homes in Rosemont typically sit on slab-on-grade foundations with utilities routed close to the surface, which means corner post placement has to be planned around the slab edge and located utilities. We call in the utility marking before we dig, and we factor that coordination time into the quote. It’s a modest cost difference from a clear yard, but it’s the difference between a clean install and a cracked slab or a broken line. For an exact number on your specific 1960s lot, call (877) 610-1318 for a free estimate.
Get Your Fence Plan Started in Rosemont
Fence work in Rosemont comes down to three things: correct county permits, post depth that accounts for the clay, and a crew that knows how to work on a tight lot without making enemies of your neighbors. That’s what we do. Call Barrett & Sons Construction at (877) 610-1318 to schedule your free, no-trip-charge fence estimate. Tom or one of his sons will answer the phone, come out to measure, and put every number on paper before any work begins. And remember: every job carries our 90-Day Done Right Promise in writing, because if it’s not done right, we want to know about it.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Rosemont and greater Sacramento County since 1998.







Before
After
Before
After
Before
After