Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterFast, Reliable Fence Installation Across Palm Springs
A new fence in Palm Springs, FL typically runs between $3,500 and $9,000 depending on the material, linear footage, and what’s hiding underground. Most vinyl and aluminum installations take two to four days once permits clear the Village of Palm Springs building department. If you’re planning a fence and want a straight answer on cost before anyone digs a hole, call us at (877) 610-1318. We’ve been working the 33406 grid long enough to know what the ground is going to do before we put a shovel in it.
Barrett & Sons Construction is owner-operated and has been since Tom Barrett founded the company in 1998. His sons run the crews. That matters in a village like Palm Springs, where the water table sits close enough to grade that a fence post can turn into a small pond if the contractor doesn’t know what he’s looking at.
Why Barrett & Sons Construction Is Palm Springs’s Preferred Fence Installation Company
Palm Springs isn’t like the unincorporated parts of Palm Beach County. Every permit here runs through the Village of Palm Springs municipal building department, not the county offices. Contractors who don’t work the area get that wrong all the time. They show up, start digging, and a stop-work order lands on the door. We file in the right place, on the right form, the first time. That’s not a small thing when you’re waiting on a privacy fence for your backyard.
Our reputation in Palm Springs is built on the work itself. Homeowners along Greenbrier Drive, around the neighborhoods near the village center, and throughout the 33406 ZIP have called us back for fence repair, gate replacement, and full installations spanning years. We don’t sub out to a rotating cast of strangers. The crew that shows up carries the Barrett & Sons name, is background-checked, and wears a uniform that means something to us.
Tom publishes his name, his address, and his license number. Look them up. Ask anyone on your street if a Barrett crew did right by them. We’d rather you check first and sign second.
Our Fence Installation Services in Palm Springs
Vinyl Fence
Vinyl is the workhorse fence material in Palm Springs, and for good reason. It shrugs off the humidity, doesn’t rot in the wet season, and stands up to afternoon thunderstorms better than wood ever will. The catch here is the water table. Standard post-hole digging hits groundwater fast in parts of the 33406, which is why we adjust footing depth and often pour elevated concrete collars so the post doesn’t sit in water. A vinyl privacy fence in Palm Springs runs $3,500 to $9,000 for a typical residential lot.
Aluminum Fence
Aluminum fencing is what most Palm Springs HOAs want when the fence faces the street or a canal. It’s light, it doesn’t corrode in the salt air that drifts inland from the coast, and it holds up under the wind loads this village sees. The 160+ mph design wind zone means we anchor posts deeper and use heavier-duty brackets than you’d see in a dryer region. You can expect an aluminum fence in Palm Springs to run $4,000 to $10,000 depending on the style and gate count.
Fence Repair
Half the fence calls we take in Palm Springs are repairs, not new installs. A leaning section, a gate that drags, a post that pulled loose after a storm. The problem is almost always below grade. If the original posts were set without accounting for the village’s high water table, they rot or shift within a few wet seasons. We pull the failed section, correct the footing, and reset with materials that won’t repeat the mistake. Repair jobs in Palm Springs typically run $400 to $1,800 depending on how many posts are involved.
Wood Fence
Wood fences still have their place in Palm Springs backyards, especially where a homeowner wants a warm, natural look that vinyl can’t match. We build them with pressure-treated posts designed for ground contact in wet conditions, and we seal everything properly before the summer rains arrive. Real talk: wood needs more upkeep here than vinyl or aluminum, and we’ll tell you that before you spend a dollar. If you want the look and are willing to maintain it, we’ll build it right.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Palm Springs
We install and service fencing products from names you can actually look up: PGT, Ply Gem, and Simonton are all manufacturers we work with regularly. If your Palm Springs HOA requires a specific material or a vinyl profile that matches homes built 20 years ago, we can usually source it. We keep common replacement parts in stock for Palm Springs fence repairs, which means faster turnaround when a gate hinge fails or a section gets damaged in a storm.
Common Fence Installation Problems We See in Palm Springs Homes
- Flooded footings from the high water table. Digging post holes without checking where the groundwater sits leads to water-filled holes and unstable fences that lean within the first wet season. We check before we dig, every time.
- Permits filed with the wrong agency. Palm Springs has its own municipal building department. Filing with Palm Beach County instead triggers stop-work orders and fines. We file with the Village of Palm Springs, period.
- CBS block walls that weren’t meant to carry fence loads. Attaching a new fence to an existing concrete block wall without verifying load-bearing capacity can crack the block. Wind loads here exceed 160 mph. We check the wall before we bolt anything to it.
- Builder-grade posts that were under-sized from day one. Newer master-planned homes sometimes get fences installed to minimum spec by the builder. A few storm seasons later, posts lean and gates bind. We reset them at a depth and diameter that matches Palm Springs conditions, not a national average.
Pricing for Fence Installation in Palm Springs, FL
Fence installation in Palm Springs runs $3,500 to $9,000 for a standard residential lot. Vinyl and aluminum land on the higher end because of the footing depth the water table demands. Chain link sits lower, and wood falls in the middle depending on the height and style. Every quote we give is a written line-item estimate. If anything changes once we’re on site, you get a written change order before we proceed. No surprise invoices at the end. The allowance that isn’t on paper is a surprise waiting for a date.
| Fence Service in Palm Springs | Typical Price Range |
|---|---|
| Vinyl Fence Installation | $3,500 - $9,000 |
| Aluminum Fence Installation | $4,000 - $10,000 |
| Fence Repair | $400 - $1,800 |
Call (877) 610-1318 for a free estimate. We’ll walk the property, check the water table, and give you a number that holds. Senior and veteran customers receive a permanent 10% discount. There’s no trip charge inside the county.
We Also Serve Cities Near Palm Springs
If you’re right outside the village line, we work throughout the surrounding area too. Our crews serve Lake Worth Corridor, Greenacres City, Lake Worth, and Lantana on a regular basis. You can learn more about our full Palm Springs coverage area or call (877) 610-1318 to confirm your address.
Serving Palm Springs, FL - Our Local Coverage Area
We’re based in the Palm Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fence Installation in Palm Springs
Yes. Palm Springs issues fence permits through the Village of Palm Springs building department, even for homes in newer master-planned communities. The HOA’s architectural approval is separate and must usually come first, but the municipal permit is what keeps the job legal. We handle the permit filing, coordinate the inspection, and make sure the sign-off happens before we backfill or call the job complete. Call (877) 610-1318 and we’ll check your address against the current requirements.
Yes, when it’s engineered for it. Aluminum fencing in Palm Springs needs post depths and anchoring that account for the wind-speed maps this area falls under. Standard national installation charts don’t cut it here. We set posts deeper and use heavier brackets on every aluminum fence we install in the 33406. Call (877) 610-1318 for a quote that accounts for your specific lot and exposure.
In most cases, yes. We work with Ply Gem, Simonton, and other major manufacturers whose profile catalogs go back decades. If the original fence is still partially standing, we can take a sample and match the profile, color, and post cap style. HOAs in Palm Springs often accept manufacturer-certified matches even when the exact product line has been discontinued. Call (877) 610-1318 with your HOA documents and we’ll tell you what’s possible before you spend money.
The Village of Palm Springs inspector will verify that post depths match the approved plan, that footings account for the water table, and that the finished fence matches the permit description. In our experience, the inspector is thorough but fair. We’re on site for the inspection, we answer any questions, and we don’t backfill or finish the job until the sign-off is in hand. If a correction is flagged, we fix it and schedule a reinspection at no added cost to you.
Sometimes. If the wall has adequate load-bearing capacity and meets wind-load requirements, we can use surface-mounted posts with adhesive anchors or a continuous grade beam approach that doesn’t penetrate the block. If the wall can’t take the load, we’ll tell you that plainly and recommend a freestanding fence set in the ground in front of the wall. The wind zone in Palm Springs doesn’t leave room for guessing. Call (877) 610-1318 and we’ll evaluate your wall before recommending anything.
If you’re ready to get a fence on the calendar, call (877) 610-1318. We answer the phone, we show up when we say we will, and every price change arrives in writing before work starts. That’s how Tom Barrett has run Barrett & Sons Construction since 1998, and it’s how his sons run it today.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Palm Springs and the surrounding Palm Beach County communities since 1998.