Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterFast, Reliable Fence Installation Across Pacific Grove
Replacing or building a new fence in Pacific Grove costs $3,500 to $9,000 for a typical residential run, and the single biggest factor in that price is the salt air. Fog off Monterey Bay corrodes standard fence hardware within two or three seasons, which means a fence that would last twenty years in Salinas will start sagging and seizing here in five. We specify hot-dip galvanized steel posts, stainless brackets, and coastal-grade coatings from day one, because we’d rather quote the right fence once than patch the cheap one twice. Call (877) 610-1318 for a free estimate, and Tom or one of his sons will walk your lot with you.
Why Barrett & Sons Construction Is Pacific Grove’s Preferred Fence Installation Company
We’ve been building and repairing fences on the Monterey Peninsula for over 29 years, and our crews know Pacific Grove’s fog, sandy soil, and Victorian-era lots from the ground up. Tom Barrett founded this company in 1998 and still answers his own phone. His sons run the crews. When you hire us, the name on the truck is the same name on the contract, and the same face you’ll see at the hardware store on Saturday. That matters in a small town like Pacific Grove, where reputation travels faster than any review site.
Pacific Grove homeowners call us because we understand what the Coastal Zone means for a fence line. Nearly every fence project here, even a straight replacement, can trigger California Coastal Commission review on top of the city permit. That’s a layer of regulatory complexity you won’t face in Monterey or Seaside, and it’s exactly why our written change orders and permit-first approach exist. We don’t tell you permits are optional. We pull them, we sit through the inspection, and we hand you the signed paperwork. The permit inspector works for you, not for us, and we like it that way.
Our Fence Installation team carries background-checked crew members on every visit to Pacific Grove. Every scope, every allowance, every price change arrives as a written change order before work proceeds. And every job is backed by our 90-Day Done Right Promise: if it’s not done right, one call brings Tom back.
Key Takeaways
- Typical residential fence in Pacific Grove runs $3,500-$9,000, with the material spec driving most of the variation.
- Salt-laden fog corrodes standard galvanized hardware in 2-3 seasons; we specify hot-dip galvanized steel and stainless from the start.
- Nearly every Pacific Grove fence project sits within California’s Coastal Zone and may require Coastal Commission review on top of city permits.
- We pull permits and sign inspections on every eligible job, and every price change arrives in writing before work happens.
- Free estimates, no trip charge inside the county, and a permanent 10% Senior & Veteran discount.
Call (877) 610-1318 to schedule your free Pacific Grove fence estimate. A live person answers, 24 hours a day, seven days a week.
Our Fence Installation Services in Pacific Grove
Wood Fence
Wood fences are the most common request in Pacific Grove, and for good reason. A properly built cedar or redwood fence fits the character of the Victorian cottages and Craftsman bungalows that line Lighthouse Avenue and the blocks around 17-Mile Drive. But here’s what most contractors won’t tell you: the buried portion of a wood post set in Pacific Grove’s sandy, salt-wicked soil rots at the grade line within six to ten years. We set our posts in concrete collars using hot-dip galvanized steel anchors and select only heartwood-grade cedar with marine-grade coatings. It costs more up front. It costs far less than replacing the whole run in a decade.
Aluminum Fence
Aluminum fencing is popular in Pacific Grove for its sight lines and low maintenance, especially on west-facing lots near Asilomar where homeowners want the view to stay open. The catch: standard powder-coated aluminum breaks down prematurely in this coastal micro-climate, pitting and chalking within five years. We specify marine-grade coatings rated for salt exposure and use stainless steel hardware throughout. A typical aluminum fence in Pacific Grove runs $4,000 to $10,000, and we’ll show you the difference between a coastal-spec coating and the inland grade before we quote.
Fence Repair
We repair more fences in Pacific Grove than we replace. Sagging pickets, seized gates, leaning posts, rotted rails: these are the fingerprints of our fog. The 93950 ZIP code sees hardware corrosion faster than almost anywhere in Monterey County, and most of the repair work we do involves pulling standard galvanized brackets and hinges that have rusted through in under three seasons. We replace them with stainless or hot-dip galvanized steel, reset posts where needed, and leave you with a fence that holds its line for years. Plus, we honor $40 off any repair over $200, and a second opinion on any written estimate you’ve received is free.
Vinyl Fence
For Pacific Grove homeowners who want zero wood maintenance and an impervious surface against salt fog, vinyl is a strong option. We install premium vinyl fence systems in the 93950 area, using UV-stabilized profiles that won’t chalk or yellow under the Monterey sun. A vinyl fence install in Pacific Grove typically runs $3,500 to $9,000. The one thing vinyl won’t do is match the historic character of a Victorian-era cottage, so we usually encourage wood or aluminum on designated historic properties, and vinyl for backyards and side yards where performance matters more.
Chain Link, Iron, Gates, and Privacy Fences
Beyond the core four, we install chain link (galvanized and vinyl-coated), iron fences, privacy fence systems, and every type of drive gate and walk gate in Pacific Grove. Chain link and iron get the same coastal hardware spec we use on everything else here. Gates are our single biggest repair category, and a seized gate hinge on a foggy Pacific Grove morning is usually a ten-minute fix with the right bracket, not a one-hour struggle with the wrong one. We also serve commercial clients throughout 93950 with the same permit-first, written-change-order approach.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pacific Grove
We’re picky about the materials that go into a Pacific Grove fence, because the wrong product here fails visibly and fast. We stock and install premium lines from Ply Gem and PGT, both of which offer salt-tested coatings and marine-grade profiles suited to the Peninsula’s conditions. We also work with Simonton products on window-and-fence combination scopes, especially on historic properties where the fence line meets the house and both need consistent detailing. The point is simple: you can look up every brand we install. No mystery parts off the back of a van, and no material that won’t stand up to Asilomar fog.
Common Fence Installation Problems We See in Pacific Grove Homes
After nearly three decades of fence work on the Peninsula, we could write a field guide on Pacific Grove failure modes. Here are the ones we see most often:
- Salt fog destroying standard galvanized hardware in 2-3 seasons. Screws, brackets, gate hinges: the standard zinc coating simply can’t stand up to Pacific Grove’s nearly year-round marine layer. We replace them with stainless or hot-dip galvanized steel every time, which costs a few hundred dollars more on an average fence and saves you a full rebuild in under a decade.
- Wood posts rotting at the grade line. Pacific Grove’s native sandy soil holds moisture right where the post meets the ground, especially on west- and north-facing lots where fog lingers longest. A post set directly in the dirt will rot to punk in six to eight years. We set every post in concrete with a steel mast, or use steel posts with wood facings, so the vulnerable buried section never touches bare soil.
- Unreinforced rubble footings under old fence lines. On the blocks west of Lighthouse Avenue, it’s common to dig up a vintage fence and find the posts sitting on plain rubble with no concrete at all. Those Victorian-era foundations weren’t built to last, and the salt air accelerates decay in the buried wood. We bring the footing up to current code as part of the replacement scope, with a written change order if the condition turns out worse than expected.
- Aluminum coating breakdown and salt pitting. Aluminum sounds like a good coastal choice, but standard powder coatings break down prematurely under Pacific Grove’s salt pitting exposures. We spec marine-grade coatings and stainless hardware so the aluminum actually performs the way the brochure says it will.
We’ve also pulled apart a failing redwood fence on a 1920s Craftsman near Lighthouse Avenue to find the original posts set in unreinforced rubble with no concrete collar. The salt air had rotted the buried sections to punk in under eight years. We replaced the run with hot-dip galvanized steel posts, stainless brackets, and a marine-grade cedar picket spec, and the Coastal Commission sign-off added three weeks to the scope. We could do more then, and we still do it the same way now: dig, look, tell you what we found, and put the price in writing before we pick up a tool.
Pricing for Fence Installation in Pacific Grove, CA
Residential fence installation in Pacific Grove generally runs between $3,500 and $9,000, with aluminum on the higher end and vinyl and wood spanning most of the range. The coastal-spec hardware and marine-grade finishes we require add roughly 10-15% to the materials cost of a standard inland fence, but they routinely double the lifespan of the run. Here’s the line-item breakdown for the two most common Pacific Grove installs:
| Pacific Grove Fence Type | Typical Range |
|---|---|
| Vinyl Fence Installation | $3,500 - $9,000 |
| Aluminum Fence Installation | $4,000 - $10,000 |
What pushes a Pacific Grove quote toward the top of the range: lot length along fog-exposed west or north elevations, Coastal Commission review timelines, historic-district requirements near Lighthouse Avenue, and the condition of existing post footings. We give free estimates with a written, line-by-line scope, and every allowance is spelled out on paper. An allowance that isn’t on paper is a surprise waiting for a date. Call (877) 610-1318 for an exact quote. No trip charge inside the county, and a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Pacific Grove
Our crews regularly work from Monterey to Marina, and we serve homes and businesses in Seaside and Castroville as well. If you’re near the Pacific Grove border and need a fence looked at, give us a call. You can also see our service area in greater detail on our Fence Installation in Pacific Grove page.
Serving Pacific Grove, CA - Our Local Coverage Area
We’re based in the Pacific Grove area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fence Installation in Pacific Grove
Yes, in most cases. Pacific Grove sits entirely within California’s Coastal Zone, so even a straight fence replacement can trigger California Coastal Commission review on top of the city permit. The rule generally applies when the replacement alters the fence’s height, material, or footprint from what already exists, but in practice nearly every fence project in Pacific Grove goes through at least a Coastal Commission administrative check. We handle that paperwork for you as part of the scope, and the timeline adds roughly two to four weeks to the job. Call (877) 610-1318 and we’ll tell you what your specific property will require before you spend a dollar.
Hot-dip galvanized steel and stainless steel are the only two hardware materials we’ll install near the Pacific Grove coastline. Standard zinc-plated screws, brackets, and gate hinges rust through in two to three seasons of salt-laden fog. Stainless steel lasts for decades and is our default for hardware and fasteners on any fence within a half mile of the water. Hot-dip galvanized steel is the cost-effective choice for posts and rails. Call (877) 610-1318 for a free estimate, and we’ll show you the difference on the actual sample hardware before we quote.
Dig it up, look at what’s actually there, and write the real scope before we touch a post. Many of Pacific Grove’s Victorian cottages and Craftsman bungalows sit on unreinforced rubble footings or plain dirt, and the fence lines are often no better. We bring the footing up to current code as part of the replacement scope, and if we find buried debris, old tanks, or unbraced post holes, we write a change order for the extra work. You’ll see every price adjustment on paper before it happens, not as a surprise on the final bill. Call (877) 610-1318 to have Tom or one of his sons walk the property with you.
Three things: the Coastal Zone, the salt-spec materials, and the age of the housing stock. Coastal Commission review adds a regulatory timeline and sometimes design conditions you won’t face in Monterey or Seaside. The hardware and coatings that survive Pacific Grove’s fog cost 10-15% more than inland specs. And the native sandy soil means more post-concrete work than you’d need on the other side of the Peninsula. You’ll never see a Pacific Grove quote that competes with a Salinas spec, and you shouldn’t want one: the cheap spec fails within a decade and costs more to rebuild. Call (877) 610-1318 for a written, line-by-line estimate with no trip charge.
Aluminum with marine-grade coating and stainless hardware lasts longest on the exposed west-facing blocks of Pacific Grove, followed by fiber-cement-backed wood with hot-dip galvanized steel posts. West-facing lots near Asilomar take the brunt of Pacific Grove’s salt-laden fog and onshore wind, so everything that touches the air or the ground needs to be spec’d for marine conditions. Avoid standard powder-coated aluminum and uncoated galvanized screws; they’ll fail visibly within five years. Call (877) 610-1318 and one of us will come out and look at your specific exposure before you commit to a material.
Get Your Pacific Grove Fence Started Today
Tom Barrett publishes his name, his address, and his license number. Look it up before you sign anything. Then call (877) 610-1318 to schedule your free Pacific Grove fence estimate. One of his sons will walk the lot with you, show you the actual hardware we’ll use, and hand you a written scope with every allowance spelled out. Permits pulled, inspections signed, 90-Day Done Right Promise in writing. That’s how we’ve done it since 1998, and that’s how we’ll do it on your fence.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Pacific Grove and the Monterey Peninsula since 1998.