Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterFast, Reliable Fence Installation Across Murphy
Fence installation in Murphy typically runs $3,500 to $9,000 for a standard 150 to 210 foot run, and most jobs take three to five working days once HOA approval and the permit are in hand. That prep work is where Murphy projects slow down: nearly every home here sits inside a master-planned community with a covenant that governs fence material, height, and color before you can even apply for the permit. We live with that process every week, and we’ll walk you through it so your fence goes up right the first time. Call us at (877) 610-1318 for a free, written estimate.
Why Barrett & Sons Construction Is Murphy’s Preferred Fence Installation Company
Tom Barrett founded Barrett & Sons Construction in 1998, and we’ve spent nearly three decades earning the kind of reputation you can actually check. He publishes his name, his license number, and every written change order before a single crew member swings a hammer. There’s no thirty-thousand-dollar surprise at the end. When we start a fence project in Murphy, you’ll know exactly what the HOA requires, what the permit will cost, and what the final number is before we break ground.
Murphy is a tight-knit town. People talk at the Kroger on Murphy Road and at church on Sunday. Ask any neighbor who’s had fence work done here. Homeowners in Rolling Ridge Estates, Maxwell Creek, and Timber Meadows have seen our crews set posts properly in this stubborn clay soil, and they’ve seen the same faces year after year. A live person answers our phone 24 hours a day, seven days a week, not a voicemail box in another state.
Because Murphy is almost fully built out with single-family brick-veneer homes on slab foundations, nearly every fence job here is a repair or replacement, not new construction. That changes the approach. New fences on new lots are easy. Replacing a fence that was set in bad footings by a volume builder in 2007, next to sprinkler lines, on clay that heaves every December, that takes someone who has done it a hundred times before in this exact subdivision. We have.
Our Fence Installation Services in Murphy
Wood Fence
Cedar privacy fences dominate Murphy’s backyards, and for good reason, they match the HOA-approved aesthetic of nearly every master-planned community here. But the original cedar posts in many 2000s-era builds are now failing at the slab line. We’ll tell you honestly whether you need a full replacement or a targeted post reset. Then we set new posts in steel-reinforced concrete footings below the heave line, add concrete mow strips at grade, and stain to match whatever your HOA has on file.
Privacy Fence
Murphy lots run tight, usually between 55 and 70 feet wide, and neighbors are close. That makes a proper privacy fence more than a preference; it’s how you get your Saturday mornings back. We build 6-foot and 8-foot privacy runs in cedar, pressure-treated pine, or composite, always with the HOA’s height and setback rules in mind. In Rolling Ridge, we’ve replaced entire property lines where the old panels had separated two full inches at every gate latch.
Chain Link Fence
Chain link is common in Murphy for pool enclosures, dog runs, and side-yard boundaries where HOA rules permit it. The big issue here is rust at the bottom rail where sprinkler overspray keeps the metal damp. We’ll swap in galvanized or vinyl-coated posts and rails, set on proper footings, and level gate lines so they swing true in July when the clay has shrunk to concrete.
Aluminum Fence
Aluminum is the cleanest option for Murphy front yards where an ornamental look is required and the HOA wants durable, low-maintenance material. It won’t rot, and it handles Collin County’s freeze-thaw cycles without warping. The important part is approval: aluminum color and style must be pre-approved by most Murphy covenant committees before installation. We’ll pull that approval and handle the paperwork so you don’t eat a red-tag and a re-work fee.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Murphy
We stock and install materials from Quikrete for every concrete footing and mow strip on Murphy fence jobs, and we use premium vinyl and aluminum panel systems that hold their color through five or six North Texas summers. We keep common components on hand locally so there’s no week-long wait for a gate hinge or a rail bracket. When we need pavers for a fence-line transition or a walk gate landing, we use Techo-Bloc or Cambridge Pavers, never an off-brand block off the back of a stranger’s truck. Named materials you can look up. That’s the standard.
Common Fence Installation Problems We See in Murphy Homes
- Heaving posts from Blackland Prairie clay. Murphy sits on some of the most expansive clay soil in Texas. Shallow post footings move with every wet-dry cycle, pulling gates out of square and separating panel unions. Our footings go below the shrink-swell zone and get steel corners for rigidity.
- Rotted cedar at the slab line. In subdivisions like Rolling Ridge and Maxwell Creek, the original builder posts often stop right at the concrete slab edge, where sprinkler water sits. That’s where rot begins. We cut back to solid wood, sister in new posts with steel brackets, and add a mow strip so string trimmers don’t ring the base.
- Sprinkler and irrigation damage. Fence replacement along a perimeter almost always crosses at least one sprinkler line. If it’s not in the contract, you’ll pay for the repair out of pocket at the end. Our written allowances include irrigation repair so the cost is yours to approve, not a surprise invoice.
- HOA approval gaps. Installing a fence without covenant sign-off in Murphy can mean a stop-work order, a red tag, and a removal order. We pull the committee approval, document the approved color and height, and only then file for the permit. It costs you nothing extra and saves you a six-week redo.
Pricing for Fence Installation in Murphy, TX
A standard 150 to 210 foot fence run in Murphy generally lands between $3,500 and $9,000 depending on material, height, and whether we’re removing old fence or starting fresh. Here’s the breakdown our Murphy customers ask about most:
| Project Type | Typical Murphy Range |
|---|---|
| Vinyl Fence Installation | $3,500 - $9,000 |
| Aluminum Fence Installation | $4,000 - $10,000 |
What moves the number? Total linear footage, gate count, whether old posts come out with a jackhammer or a hand puller, and whether we’re matching an HOA-mandated stain color. Every one of those items appears in writing before we start. Call (877) 610-1318 and we’ll send a written line-item quote for your specific lot. Free, and nobody pressures you on the phone.
We Also Serve Cities Near Murphy
From our Dallas-Fort Worth office, our crews serve Murphy and the surrounding communities daily. You’ll see our trucks in Sachse, Wylie, Lucas, and Plano on any given week. If you’re a few miles from the Murphy city limit, call anyway: no trip charge inside the county, and our Fence Installation team knows each city’s permit quirks and HOA expectations before they pull up.
Serving Murphy, TX - Our Local Coverage Area
We’re based in the Murphy area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fence Installation in Murphy
Yes. Nearly every master-planned community in Murphy, including Rolling Ridge and Maxwell Creek, requires a written covenant review and approval of fence material, height, and color before you pull a permit. Plan for two to six weeks of approval time on top of the build schedule. We prepare the submittal packet for you, including stain samples and material spec sheets, and we won’t break ground until the committee has signed off. Call (877) 610-1318 and we’ll handle the paperwork with your quote.
Murphy sits on Blackland Prairie clay, which shrinks dramatically during hot, dry summers and heaves back every wet winter. Fence posts set in shallow concrete footings at the default builder depth ride that movement straight out of square. Gates bind, panels separate, and the posts lean by degrees you only notice when the latch stops working. We set posts 30 to 36 inches deep, below the shrink-swell zone, with steel-reinforced footings that hold through the worst of it. For your specific lot, we can give you an exact repair number with a free estimate.
At minimum, it should include irrigation or sprinkler line location and repair, existing concrete removal at the slab edge, HOA committee fees, and the city permit. If those are missing, you’ll pay for them later as a change order or a surprise bill. Our quotes in Murphy include every allowance in writing: sprinkler repair, mow strip installation, stain match, and post removal labor. No surprise invoices at the end. Ask for a free written quote at (877) 610-1318.
Yes. The City of Murphy requires a permit for fence replacement, and most HOA-governed subdivisions require their own review first. We pull every eligible permit and get every inspection signed. A contractor who tells you permits are optional is giving you written permission to fail a future home inspection when you sell. We don’t skip that step, ever.
Yes. Most Murphy subdivisions were built by volume builders like Centex, KB Home, and David Weekley during the 2000s and early 2010s, and each phase used a consistent fence profile and stain tone. We document your existing panel dimensions, picket width, and HOA-approved stain before ordering material so the replacement section disappears into the old run. Call (877) 610-1318 for a free estimate and we’ll match it line for line.
What a Murphy Fence Project Actually Triggers
Here’s what most people don’t know until a contractor starts: because Murphy transformed from a small rural community to a nearly fully built-out suburb between 2000 and 2015, almost every fence job here now sits under an HOA covenant with strict exterior material and color rules. There is no empty land left. That means the local construction market is almost entirely renovation and repair, and the committee approval layer is mandatory before a permit gets filed. This is not a “call and we’ll start next Tuesday” situation. The approval alone can add two to six weeks, compared to neighboring non-HOA cities like Wylie or Parker, where a contractor can pull a permit and dig the same week.
That reality is exactly why our first step on any Murphy fence project is inspection and paperwork, not digging. We walk the fence line, document what’s there, check the HOA’s filed color and height requirements, locate the sprinkler lines, and put every scope item in writing. If a post comes out and the concrete is bigger than expected, that’s a written change order with a price you approve before we keep going. No surprises, no vague allowances. An allowance that isn’t on paper is a surprise waiting for a date.
On a wood fence job in Rolling Ridge Estates, our crew uncovered the original builder’s cedar posts rotted at the concrete slab line from years of clay heaving and sprinkler saturation. We replaced the full 210-foot run with steel-post-reinforced red cedar, added concrete mow strips at the slab edge, and matched the HOA’s approved stain color before submitting the permit packet. Final inspection signed off the same week, no re-work, no fines. That’s how we’d rather handle every Murphy fence: get the approval right, get the footing right, get the paperwork right, then build.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Murphy and surrounding Collin County communities with Fence Installation and full-service construction since 1998.