Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterFast, Reliable Fence Installation Across Margate
Fence installation in Margate typically runs $3,500-$9,000 for a standard vinyl privacy fence on a residential lot, and most jobs take two to four days once permits clear. We work the neighborhoods off Margate Boulevard, State Road 7, and Atlantic Boulevard every week, so we know what Margate’s ground does to a fence post. Call (877) 610-1318 for a free estimate, and we’ll send Tom Barrett’s crew out to walk the property line with you before any number goes on paper.
One thing we tell every Margate homeowner before we dig: this city sits on drained Everglades marsh, and the water table is only 12-24 inches below your grass. That changes how deep your posts go, how we set them, and whether your fence survives a wet season. Most outfits from out of town don’t plan for that. We do.
Why Barrett & Sons Construction Is Margate’s Preferred Fence Installation Company
Barrett & Sons has been owner-operated since 1998, and the name on the truck belongs to the man who shows up at your door. Tom Barrett’s sons run the crews here in Margate, and they answer to him, not to a call center in another state. When you call (877) 610-1318, a live person picks up, 24 hours a day. Not a voicemail box.
What does that mean for Margate specifically? It means we pull every permit the City of Margate requires, and we don’t skip the inspection. Margate’s code enforcement is strict about wind-load and impact-protection standards, which is a good thing. The permit inspector works for you, not for me, as Tom says. That’s why we like him.
We also honor our 90-Day Done Right Promise on every fence we install in Margate. It’s written on the contract, not buried in fine print. If something isn’t right, call us and Tom comes back. That’s the deal since day one.
Margate homeowners tend to be people who’ve already been burned once. A national company quotes one price by phone and shows up with another. We don’t operate that way. Every scope, every change, every material substitution arrives as a written change order before we pick up a shovel. The allowance that isn’t on paper is a surprise waiting for a date, and we don’t do surprises.
Ask anyone on your street, or look up Tom Barrett’s license number yourself. It’s published and verifiable. We want you to check.
Our Fence Installation Services in Margate
We handle the full range of Fence Installation work, but in Margate a few services come up more than others because of the soil, the storm code, and the age of the housing stock. Here’s what we do most for Margate homeowners:
Privacy Fence
Vinyl privacy fence is the most requested fence in Margate, particularly in the single-story CBS neighborhoods built between 1960 and 1985. Homeowners want a solid 6-foot panel for backyard privacy and noise reduction along the busier corridors. We set posts on 30-inch footers with galvanized reinforcement, because an 18-inch footer in Margate groundwater is a two-year fence. It heaves, it racks the gate, and the panels pop. That’s not a warranty problem. That’s a footer problem.
Aluminum Fence
Aluminum fence in Margate is a smart choice for pool code compliance and for homes that want an open sightline but still need wind-rated structural connections. Margate sits in a Broward County high-velocity wind zone, so the posts, brackets, and panel-to-post connections carry a heavier engineering load than people expect. We spec ALUMINUM fence with through-bolted connections and rated posts, not the lighter screening-grade stock a discount installer might use. Your pool barrier has to meet code, and Margate inspectors check it.
Fence Gates
Gates are where cheap fence work falls apart first. A heavy gate on a shallow post starts sagging within a season on Margate’s soft ground. We set gate posts in high-early concrete with additional depth and bracing, and for motorized or automatic gates we pull the electrical permit and get the inspection sign-off. Skip-the-permit gate work is common here, and it becomes an uncovered insurance claim later. We frame wind-rated automatic gates properly the first time.
Fence Repair
Fence repair in Margate usually means one thing: high-water-table post resets. We see it all over the older grid streets, from Margate Boulevard down through the garden-condo sections. A post heaved by a summer storm will rack an entire 60-foot run, and patching a panel without fixing the footer is like painting over rot. We reset posts at proper depth, dewater when needed, and get the repair to hold through the next wet season.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Margate
We carry premium fence material brands you can look up, not mystery stock off a van. On Margate jobs that call for a hardscape base under a fence line or a paver apron around a gate, we install from brands like Techo-Bloc and Cambridge Pavers when the scope calls for a structured base. The point is accountability. If it has a brand name stamped on it, you can verify the spec sheet. We stock common parts locally for Margate customers, which means faster turnaround on repairs and replacements when a panel or gate component fails.
Common Fence Installation Problems We See in Margate Homes
We’ve worked enough Margate lots to know the failure patterns. Here’s what we run into, and what we do about it:
- Shallow post footers under 24 inches. In Margate the water table sits just 12-24 inches below grade, especially during the May-October wet season. A post set at 18 inches hits saturated soil and heaves after a hard thunderstorm. We go 30 inches minimum on every post we set in Margate, and we dewater the hole when we need to.
- Missing wind-load bracing. Panels installed without upgraded wind-rated posts or through-bolted structural connections fail Broward County wind-load checks, which forces a rework before final inspection. We build to the wind-load chart from the start, because the alternative is a fence that passes a look, not a code review.
- Unpermitted gate work. A contractor who frames a 7-foot privacy fence with a motorized gate and doesn’t pull a permit leaves you with no inspection sign-off. That becomes an uncovered repair when it fails and you file a claim. We pull the permit, schedule the inspection, and produce the sign-off for your file.
- Fence-to-slab connection failures. Older Margate homes often have an existing concrete slab at the property line, and some crews bolt posts to the slab edge without structural anchors. Wet-season saturation plus wind-load torque pulls those anchors loose. We use rated concrete anchors and, when the slab won’t hold, we core and set the post properly.
Pricing for Fence Installation in Margate, FL
Here’s the honest math for Margate fence work. We price by the linear foot with allowances for site conditions, and we write it all down before work starts. Margate’s high water table means we quote for 30-inch footers as standard, not as an upgrade. A cheap quote that budgets 18-inch holes is bidding the wrong fence for this ground. Our pricing includes the permit, the inspection, the deeper footers, and the written 90-Day Done Right Promise. No trip charge inside the county, and we honor a permanent 10% Senior & Veteran discount on every eligible job.
| Margate Fence Service | Typical Price Range |
|---|---|
| Vinyl Fence Installation | $3,500 - $9,000 |
| Aluminum Fence Installation | $4,000 - $10,000 |
| Fence Repair (high-water-table post reset) | $1,200 - $2,800 |
| Fence Gates (wind-rated automatic) | $1,500 - $4,500 |
Call (877) 610-1318 for a line-item quote specific to your property line and your fence type. The estimate is free, and it comes in writing.
We Also Serve Cities Near Margate
We run crews throughout Broward County, and if you’re in Margate or the surrounding area, we can usually get to you within a couple of days for an estimate. That includes Coconut Creek, Pompano Beach, North Lauderdale, and Coral Springs. Same owner, same written pricing, same 90-Day Done Right Promise.
Serving Margate, FL - Our Local Coverage Area
We’re based in the Margate area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fence Installation in Margate
Fence posts in Margate need to go at least 30 inches deep, which is deeper than the common 18-24 inch standard in drier parts of South Florida. The water table here is only 12-24 inches below grade most of the year, and shallow footers saturate, heave, and rack the fence after wet-season storms. We dig to 30 inches minimum and set the posts in high-early concrete, often with a dewatering sump during the May-October rainy months. Call (877) 610-1318 and we’ll come measure your lot and tell you exactly what your footer plan should be.
Yes. Margate enforces Broward County’s wind-load and permit requirements on residential fencing, and a 6-foot privacy fence is not exempt just because it is residential. The inspector checks post depth, footer strength, and wind-rated panel connections at the final walk. We pull the permit, schedule the inspection, and hand you the sign-off for your file. Skip that, and a later insurance claim can turn into an uncovered repair.
An aluminum fence in Margate has to meet Broward County’s high-velocity wind-zone rating for structural components, which means rated posts, through-bolted panel connections, and gate hardware engineered for the load. We quote Margate aluminum fences with the wind-rated engineering built into the spec, not added as a change order later. If a bid looks too low, ask to see the wind-load detail sheet. Call (877) 610-1318 and we’ll show you ours.
A properly permitted and inspected wind-rated fence can support an insurance mitigation filing in Margate, particularly when documented with the sign-off, the wind-load spec sheet, and photos of the footer depth before backfill. A fence with unpermitted, shallow post work will not help and may complicate a claim. We give you the documentation package at the end of every Margate fence job: permit, inspection sign-off, material spec sheets. That’s the file your insurer wants to see.
We install fences in Margate year-round, including during the May-October wet season. What changes is the method, not the schedule. We dewater post holes as we dig, set in high-early concrete to beat saturation, and adjust the pour schedule around heavy afternoon storms. A dry-season install is simpler, but a wet-season install done right holds up. Call (877) 610-1318 and we’ll give you a straight answer on timing for your lot.
Your Fence in Margate Deserves a Footer That Survives the Water Table
The truth about fence work in Margate is this: most failures happen below ground, long before the panel ever moves. This city sits on drained Everglades marsh, and the ground remembers that. Build shallow and the water table teaches you the lesson within two wet seasons. Build deep, with the right concrete and the right wind-rated connections, and you have a fence that holds.
Barrett & Sons has been doing this since 1998, and our crew runs Margate jobs the way we’d build our own fence: permits pulled, inspections passed, posts deeper than they need to be, and every price change in writing before a nail moves. The scope in writing, the allowances in writing, the change orders in writing. That’s the whole company in one sentence.
We carry the premium brands you can verify, and we back every Margate fence with the 90-Day Done Right Promise. One call brings Tom back. That’s written on the contract.
We’re not the cheapest fence crew in Margate, and we won’t try to be. We’re the one that stands behind the work, keeps the permit honest, and answers the phone when something needs attention. If that sounds like the kind of contractor you’ve been looking for, call (877) 610-1318 to schedule your free estimate. We’ll walk the property line, measure the run, and price the footer depth Margate actually requires.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Margate, FL and surrounding Broward County communities since 1998.