Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterFast, Reliable Fence Installation Across Dixon
A new fence in Dixon runs $3,500-$9,000 for most residential jobs, and the real question isn’t the price, it’s whether the fence is built to stand up to the wind that funnels through the I-80 corridor. We’re Barrett & Sons Construction, and we’ve been setting posts in Solano County clay long enough to know that a fence spec written for Woodland won’t survive three winters in Dixon. The Delta breeze here regularly hits 25-30 mph, and when it does, it finds every weak post, every shallow footing, and every undersized bracket. Call Tom Barrett’s crew at (877) 610-1318 and we’ll come out, look at your ground, and give you a written price before you spend a dime.
Why Barrett & Sons Construction Is Dixon’s Preferred Fence Installation Company
Tom Barrett founded this company in 1998 and his sons run the crews. When you call, you talk to someone who knows the difference between a fence that will hold in Dixon’s wind gap and one that will rack out by year three. We don’t dispatch strangers. The crew that shows up on Porter Road or West A Street carries the Barrett name on the truck.
Dixon homeowners have seen the national outfits quote one number on the phone and hand them a change order at the door. Our price is our price, and every scope change arrives as a written change order before a single post goes in. If we say a permit is required, it gets pulled. If the inspector wants to see the hole depth before the concrete pour, we schedule it. That’s not a favor, that’s how we’ve done it for over 29 years.
We also back every fence with a written 90-Day Done Right Promise. If something’s not right, one call brings Tom back. No fine print, no “that’s normal settling.” We live twenty minutes from most Dixon neighborhoods. If a section leans, we want to know about it before you have to look at it every morning.
Our Fence Installation Services in Dixon
Our Fence Installation team handles everything from privacy fences to farm fencing. Every job starts with a site walk in Dixon so we can check the soil, the wind exposure, and the existing property lines. Here’s what gets called for most often:
Privacy Fence
Privacy fences are the bulk of our work in Dixon’s newer subdivisions off Porter Road and Valley Glen Drive. The problem isn’t the boards, it’s the racking. Six-foot sections catch the Delta wind like a sail, and if the posts aren’t set at 30 inches with high-early concrete, you’ll watch the whole run lean before the first spring. We set every Dixon privacy fence for wind, not just for looks.
Vinyl Fence Installation
Vinyl is popular in Dixon because it handles the summer heat without cupping and doesn’t need staining. But vinyl flexes in high wind, so rail spacing and post reinforcement matter more here than in Woodland. We specify thicker wall posts and mid-rail blocking on any vinyl run longer than 40 feet. A vinyl fence in Dixon runs $3,500-$9,000 depending on footage, gate count, and whether we’re pulling out old redwood or starting from bare ground.
Fence Repair
We see a lot of three- and four-year-old fences in Dixon that should have lasted fifteen. Wind-driven racking tears sections at the nail lines, and the clay heave in winter cracks concrete collars around shallow posts. We’ll tell you plainly whether a repair makes sense or whether you’re pouring money into a frame that was under-spec from day one. A tight repair on two or three sections costs a fraction of full replacement, and we do them all the time.
Aluminum Fence Installation
Aluminum is the right call for Dixon homes where the Delta breeze carries salt air. Standard zinc-plated steel rusts within five to seven years on west- and south-facing exposures. Aluminum doesn’t rust, eats less paint, and holds its finish in the 100-degree summers. An aluminum fence in Dixon runs $4,000-$10,000 installed. We use thicker gauge posts when the run is exposed to the full wind corridor.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Dixon
We don’t install mystery brands off a van. For fence and adjacent work, we carry names you can look up: Schluter for trim and edge profiles on gate surrounds, Sterling for bath and utility upgrades tied to fence-adjacent projects, and GAF when a fence abuts a structure and the flashing has to match the roofline. If a Dixon customer calls with a specific material request, we’ll quote it in writing rather than talk them into something we happen to have in the yard.
Common Fence Installation Problems We See in Dixon Homes
- Wind-driven racking on newer subdivisions. The sustained headway through the I-80 gap pushes 6-foot privacy sections past the point where nail lines hold. We see this on the west-side tracts off Porter Road every single spring. The fix is deeper posts, tighter spacing, and mid-rail blocking.
- Expansive clay heaving shallow footings. Dixon sits on Yolo/Solano clay that swells through the winter fog cycle and shrinks in summer. Posts set at 24 inches with dry-pack concrete crack their collars by year two. We set at 30 inches minimum and use high-early concrete to lock the post before the clay moves.
- Salt air corrosion on zinc-plated hardware. The Delta breeze carries enough salt to eat standard zinc-plated brackets in five to seven years, especially on south- and west-facing runs. We specify hot-dip galvanized or stainless hardware on every Dixon fence we install, regardless of material.
- Old agricultural compaction under newer fence lines. Any lot west or south of downtown that was row-crop or dairy land before the tract went in has residual compaction from decades of tractor traffic. That affects how holes dig and how concrete bonds. We’ll tell you what the auger hits before we start, not after the job is half dug.
Pricing for Fence Installation in Dixon, CA
Most Dixon residential fences fall between $3,500 and $9,000 depending on the material, footage, gate count, and what has to come out before the new line goes in. Here are the baseline numbers for the two materials we hang most often in Dixon:
| Material | Installed Price Range in Dixon |
|---|---|
| Vinyl Fence Installation | $3,500-$9,000 |
| Aluminum Fence Installation | $4,000-$10,000 |
What moves the price: total linear footage, the number of gates, whether the old posts are set in concrete you didn’t know about, and how much of the run sits in full wind exposure. We give free estimates in Dixon and we put every number in writing before the first post goes in. Call (877) 610-1318 to schedule one.
We Also Serve Cities Near Dixon
Our Fence Installation in Dixon clients often ask if we cover the surrounding towns. We do. We work in Davis, Winters, Woodland, and West Sacramento regularly, and we’ve had Dixon customers refer us to family all along the I-80 corridor. If you’re in one of those towns and the wind blows the same way it does here, call us. The same specs apply.
Serving Dixon, CA - Our Local Coverage Area
We’re based in the Dixon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fence Installation in Dixon
Posts should be set at 30 inches minimum in Dixon, with high-early concrete and a full collar. The wind off the Coast Range gaps pushes hard enough to lean a 24-inch deep post fence within three years, and the expansive clay cracks shallow collars through the winter fog cycle. We set every Dixon fence post at 30 inches regardless of code minimum. Call (877) 610-1318 if you want someone to look at what you have before it leans further.
Because Dixon gets the worst of the wind gap, and a vinyl fence in Woodland doesn’t have to be reinforced the same way. In Dixon we use thicker wall posts, tighter rail spacing, and mid-rail blocking on longer runs. That adds material and labor cost up front, but the alternative is replacing the whole fence after the wind works the rails loose. The $3,500-$9,000 range reflects the reinforced spec we build for Dixon conditions, not a generic valley spec.
Hot-dip galvanized brackets and ring-shank stainless nails, no exceptions. The Delta breeze carries salt air, and standard zinc-plated hardware rusts through in five to seven years, especially on south- and west-facing exposures. We don’t use the cheap package stuff from big-box stores on Dixon jobs. The hardware spec is written into the contract.
Most of the newer tract land in Dixon was row-crop or dairy ground for decades, so the soil below the turf line has compaction patterns from old irrigation and tractor traffic. That affects auger speed, hole stability, and how well the concrete bonds. It doesn’t mean a fence can’t be built, but it means whoever digs the holes should know what they’re hitting before they get surprised half into the run.
Some fence work in Dixon requires a permit, especially if you’re replacing an existing barrier along a property line or the run exceeds a given height. We pull permits on every eligible job. The inspector works for you, not for me, and we’d rather have him sign off than leave you with a fence the county can fine you for. Call (877) 610-1318 and we’ll tell you what your specific job needs.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Dixon and surrounding Solano County communities since 1998.