Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterFast, Reliable Driveway & Pavers Across Manhattan Beach
Driveway and paver work in Manhattan Beach runs $4,500-$18,000 for most full installations, with replacement landing between $5,000 and $14,000 depending on square footage and the coastal-spec materials your job actually needs. If you live in the Sand Section, the Hill Section, or anywhere in the 90266 and 90267 ZIP codes, you already know that salt air changes what survives here. Call Barrett & Sons Construction at (877) 610-1318 and Tom or one of his sons will give you a straight answer on what your driveway should cost, not a number that changes when the truck shows up.
Why Barrett & Sons Construction Is Manhattan Beach’s Preferred Driveway & Pavers Company
We’re not the biggest outfit in Manhattan Beach, and we don’t try to be. Tom Barrett founded this company in 1998, and his sons run the crews. When you call, you talk to someone who has actually set pavers on a 30-foot-wide Sand Section lot and knows why that changes the whole job. Our Driveway & Pavers team has worked on projects from the Hill Section down to the walk streets, and we’ve learned the hard way that the marine layer isn’t just fog. It’s a materials problem.
Here’s what that means for you. Permits get pulled on every eligible job, because Manhattan Beach planning is strict and the permit inspector works for you, not for us. Every scope change arrives as a written change order before work happens. No surprise invoices. And every completed job carries our 90-Day Done Right Promise, written on the contract, not buried in fine print. If something’s not right, Tom comes back. One call.
We answer our own phone 24/7. No voicemail box, no out-of-state call center. Tom publishes his name, address, and license number, so you can look him up before you sign anything. That’s how we’ve done it since 1998, and that’s how we do it in Manhattan Beach.
Our Driveway & Pavers Services in Manhattan Beach
Paver Driveways
A paver driveway in Manhattan Beach typically runs $7,000-$18,000, and on Sand Section lots the installation is a different animal than what inland contractors are used to. Lots are often 30 feet wide with zero side setbacks, which means material staging happens through public alleys under city permit. We coordinate deliveries to the hour so your neighbor can still get to their garage. We install Techo-Bloc and Cambridge Pavers, and we use polymeric sand with a marine-grade sealant, because unsealed joints here collect wind-borne sand and salt spray and fail within one winter.
Concrete Driveways & Concrete Work
Concrete driveway installation in Manhattan Beach runs $4,500-$12,000. But here’s the thing most homeowners don’t find out until it’s too late: standard galvanized rebar inside concrete near the ocean corrodes and expands within 5-7 years, causing surface cracks and spalling. We specify stainless or epoxy-coated rebar as a baseline, not an upgrade. On blocks closest to the beach, sandy subsoil often means deeper excavation and more base prep than a standard pour. We’ll show you the difference on paper before we dig.
Asphalt Driveways & Resurfacing
Asphalt is less common on the beachfront but it still shows up on some Hill Section properties and on alley-fed parking areas. Asphalt paving in Manhattan Beach runs $3,500-$9,000 for a new install, and resurfacing makes sense when the base is still solid. The marine layer means we time sealcoating around the fog so the emulsion actually cures. Done wrong, an asphalt driveway here gets soft edges and ravels within two years.
Driveway Repair & Replacement
If your existing driveway has surface spalling, cracked edges, or heaving, the question is whether the failure is cosmetic or structural. In the Sand Section, lots built right up to the property line are vulnerable to water intrusion from neighboring elevated lots. Without a proper drainage channel and sealed edging, slab edges crack and heave within a few seasons. We’ll tell you honestly if a repair buys you years or if full replacement is the only road. Replacement in Manhattan Beach runs $5,000-$14,000.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Manhattan Beach
We stock and install materials from Techo-Bloc, Cambridge Pavers, and Quikrete for Manhattan Beach projects. Why does that matter? Because when a Salt Section driveway needs a specific paver to match an existing run, we can source it without a three-week wait. We keep polymeric sand, edge restraints, and marine-grade sealants staged for Manhattan Beach jobs during the dry season, which means faster turnaround when the weather window opens. These are brands you can look up and verify, not mystery pallets off a van.
Common Driveway & Pavers Problems We See in Manhattan Beach Homes
- Salt-driven rebar corrosion. Standard galvanized rebar in concrete driveways, pool decks, and walkways corrodes and expands within 5-7 years near the ocean, causing surface cracks and spalling. Coastal-spec stainless or epoxy-coated rebar is what the house should have had from day one.
- Polymeric sand washout. Unsealed paver joints collect wind-borne sand and salt spray, which breaks down the joint binder within a single winter. Loose joints lead to shifting pavers, which lead to trip hazards and drainage problems.
- Property-line water intrusion. In the Sand Section, driveways built right up to the property line catch runoff from neighboring elevated lots. Without a proper drainage channel and sealed edging, the slab edges crack and heave within a few seasons.
- Staging through tight alleys. Lots just 30 feet wide with zero side setbacks leave no room for material staging. You need a contractor who knows how to permit the alley, choreograph concrete truck deliveries, and notify neighbors formally before the pour.
Pricing for Driveway & Pavers in Manhattan Beach, CA
Manhattan Beach pricing is not a mystery. It’s a function of coastal-spec materials, tight-lot logistics, and city permitting requirements. Here are the ranges you should expect for the three services most Manhattan Beach homeowners ask us about:
| Service | Typical Manhattan Beach Range |
|---|---|
| Paver Driveway Installation | $7,000-$18,000 |
| Concrete Driveway Installation | $4,500-$12,000 |
| Driveway Replacement | $5,000-$14,000 |
The gap between the low and high end comes down to square footage, access, and whether the job needs coastal-spec materials. A concrete driveway with standard rebar poured on a wide Hill Section lot will land near the bottom of the range. The same square footage on a Sand Section teardown lot with alley-only access, stainless rebar, and a drainage channel will push toward the top. We’ll give you a written line-item estimate before you commit. Call (877) 610-1318 for your free estimate, and ask about our 10% Senior & Veteran discount.
We Also Serve Cities Near Manhattan Beach
If your home is in Redondo Beach, Rolling Hills Estates, Palos Verdes Estates, or Torrance, we handle driveway and paver work there too. The permitting is different, the coastal conditions are different, and the materials that survive on the beachfront are not the same ones that make sense a mile inland. We’ll match the right spec to your block, not your ZIP code. Call (877) 610-1318 and tell us where you are.
Serving Manhattan Beach, CA - Our Local Coverage Area
We’re based in the Manhattan Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Driveway & Pavers in Manhattan Beach
Salt-laden air on the beachfront forces you into stainless steel edge restraints, marine-grade polymeric sand, and corrosion-resistant base materials that inland jobs simply don’t need. You’ll also pay for alley-permitted staging on Sand Section lots where there’s no street frontage to stage from. The price difference over an inland job is typically 15-25% for the same square footage, and most of that is materials and logistics, not markup. Call (877) 610-1318 and we’ll show you the coastal-spec line items side by side with the inland-spec so you can see exactly where the money goes.
Marine-grade polymeric sand, installed over a properly compacted base and sealed with a marine-grade sealant, is the only joint material we’ll spec for a Sand Section driveway. Standard polymeric sand washes out within a single wet season when it’s exposed to wind-borne sand and salt spray. We’ve seen it happen on jobs near 2nd Street and Ocean Drive, and we’ve fixed enough of them to know the cheap spec isn’t cheap.
It means material staging, concrete truck access, and equipment placement all have to be coordinated through the public alley under city permit. There’s no side yard to stack pavers in, no street frontage to park a forklift on, and no room to make a mistake without blocking your neighbor’s garage. Our crew has run enough of these to treat the alley permit as step one, not an afterthought.
Yes, most driveway and hardscape replacements in Manhattan Beach require a permit, and in the coastal zone you may also need California Coastal Commission review. That’s the dual-permitting gauntlet that catches out contractors who only work inland. We pull permits on every eligible job, and we schedule inspections so the permit inspector signs off before we call the job done.
With standard galvanized rebar and no joint sealing, expect surface spalling and cracking within 5-8 years. With stainless or epoxy-coated rebar, proper drainage, and joint maintenance, a concrete driveway in Manhattan Beach can last 25-30 years. That’s the difference between the coastal spec and the inland spec, and it’s the reason we won’t pour the cheap version here. Call (877) 610-1318 for a free estimate, and we’ll write up both options so you can decide with your eyes open.
Call Barrett & Sons Construction for Your Manhattan Beach Driveway Project
If you live in Manhattan Beach proper, the Hill Section, or the Sand Section, and your driveway is cracking, heaving, or just looks like the ocean has been eating it, call Tom Barrett at (877) 610-1318. He’ll send one of his sons out to look at it, give you a written estimate, and tell you honestly whether the coastal spec is worth the money for your specific block. Free estimates, written change orders, permits pulled, and the 90-Day Done Right Promise on every completed job. We serve Manhattan Beach, and we’ll be around long after the pavers are set.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Manhattan Beach since 1998.