Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterFast, Reliable Driveway & Pavers Across Clovis
Driveway and paver work in Clovis isn’t a one-spec-fits-all job. Every lot is different east of Clovis Avenue, and a base that holds flat on one side of the street can heave on the other. That’s why Barrett & Sons Construction puts every scope in writing before the first paver moves, and why we pull a permit on every eligible driveway or patio job in Clovis. Tom Barrett and his sons run the crews themselves, and they know the 93611-to-93619 soil transition better than most. If you’re ready to talk through what your Clovis driveway actually needs, call us at (877) 610-1318 and we’ll come out, walk the lot with you, and give you a written estimate.
Why Barrett & Sons Construction Is Clovis’s Preferred Driveway & Pavers Company
We’re the owner-operated outfit, founded in 1998, and the name on the truck is the same name that answers the phone. Tom Barrett lives in the Central Valley and most jobs in Clovis see him on-site, not a rotating crew from an out-of-state office. Scheduling and dispatch run from our Fresno, Central Valley office; the crews who work in Clovis are local, background-checked, and they carry the Barrett & Sons name on their shirts.
What does that mean for you in Clovis? It means when the original pavers on a 1970s ranch off Bullard Avenue start heaving at the garage slab, we already know why. The adobe clay under those older 93611 homes expands and contracts with winter moisture, and a 2-inch sand-set paver system just can’t absorb that movement. We’ve seen it enough times that our first walkthrough looks at the soil, not just the surface. That local knowledge is what keeps a paver driveway in Clovis from cracking the same way twice.
We also don’t surprise you. Every price change, every material allowance, every scope adjustment comes as a written change order before work proceeds. If the city or your HOA changes a spec mid-permit, you’ll see it on paper before you see it on the invoice. That’s how we’ve kept Clovis customers calling back for tile roofs, kitchen remodels, and fence installations for over 29 years.
Our Driveway & Pavers Services in Clovis
Paver Driveways
A paver driveway in Clovis runs $7,000 to $18,000, and the base spec matters more than the paver brand. We lay Techo-Bloc and Cambridge Pavers frequently, but the real work is underneath: a 6-inch crushed granite base over permeable geotextile on 93619 lots, or a deeper compacted lift on 93611’s expansive clays. Mortar-set pavers crack here. Polymer-sand joints flex and survive. We specify the flex, not the rigid bed.
Concrete Driveways & Concrete Work
Concrete driveways in Clovis run $4,500 to $12,000. The San Joaquin Valley’s 105°F summer heat draws bleed water out of a slab faster than coastal crews expect, and that’s how you get spalling at the control joints inside five years. We spec a mix that holds moisture long enough to float properly, and on 93619 hillside lots we often recommend deeper perimeter grade beams to handle the clay-to-granite transition. Slab movement is the enemy here, not the finish.
Asphalt Driveways & Resurfacing
Asphalt in an HOA-governed Clovis PUD has to pass inspection, not just look black on day one. The subgrade east of Willow Avenue sometimes hasn’t been proof-rolled to 95% relative compaction, and the edges ravel under the district’s 2% slope. We resurface with the compaction verified first, then the AC lift goes down. That’s the difference between an HOA sign-off and a re-do in eighteen months.
Driveway Repair & Replacement
Full driveway replacement in Clovis runs $5,000 to $14,000. If your current driveway has a 3-inch lip at the garage slab, the problem is the base heaving underneath, not the surface on top. We don’t patch that. We rebuild the section with the right base, re-set the pitch to drain away from the house, and match the HOA finish schedule if one applies. Replacement is when all of this local soil knowledge pays for itself once, not twice.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Clovis
We stock and install premium hardscape materials in Clovis, including Techo-Bloc, Cambridge Pavers, and Quikrete products. These aren’t names we just mention; they’re what we order for Clovis jobs, and we know how each one behaves in the valley’s summer heat and winter soil movement. The Driveway & Pavers team keeps local suppliers on speed dial so material turnarounds stay short, even during spring rush. When a Clovis customer calls, we don’t wait on a freight truck from three states away.
Common Driveway & Pavers Problems We See in Clovis Homes
- Heaving at the garage slab in 93611 and 93612. The 1970s-1980s ranch homes there sit on expansive adobe clay that swells in winter and shrinks through the long dry summer. A sand-set paver course over that soil will lift at the cold joint every single year.
- Spalling control joints on unsealed concrete. The valley’s near-zero humidity during 100°F stretches pulls bleed water out of a fresh slab fast. If the finisher didn’t adjust for Clovis heat, you get a porous surface that pits and flakes within five years.
- Mortar-joint cracks in 93619 developments. East of Clovis Avenue, soils shift from adobe clay to decomposed granite within a single block. Rigid mortar joints can’t absorb that differential movement, and one winter rain season opens hairline cracks at the sidewalk.
- Asphalt edge raveling in HOA PUDs. Builders sometimes skip the proof-roll on subgrade compaction, and the mandated 2% slope puts more water pressure on the edges. Once the edge starts raveling, the whole lift is compromised.
Pricing for Driveway & Pavers in Clovis, CA
Here’s what you should plan for in the current Clovis market. These are what we’re quoting on actual jobs right now, not ballpark guesses:
| Job | Typical Clovis Range |
|---|---|
| Paver Driveway Installation | $7,000 - $18,000 |
| Concrete Driveway Installation | $4,500 - $12,000 |
| Driveway Sealing | $250 - $700 |
The biggest driver of the gap between the low and high end is the base work. A flat 93612 lot with stable soil comes in on the lower side. A 93619 hillside lot with decomposed granite and an HOA finish schedule comes in higher. The second driver is materials: polymer-sand joints cost more upfront than mortar, but they survive adobe movement that mortar won’t. Call (877) 610-1318 for a free, written estimate on your Clovis driveway. No trip charge inside the county, and a free second opinion on any written estimate you’ve already got.
We Also Serve Cities Near Clovis
Beyond Clovis, Barrett & Sons Construction regularly runs driveway and paver jobs in Fresno, Old Fig Garden, Sanger, and Fowler. The soil specs differ from one side of the county to the other, and we adjust the base, mix, and joint spec accordingly. If you’re nearby and shopping a paver driveway, call us and we’ll give you the same written scope we’d write for a neighbor across the street.
Serving Clovis, CA - Our Local Coverage Area
We’re based in the Clovis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Driveway & Pavers in Clovis
Because the soil east of Clovis Avenue shifts from expansive adobe clay to decomposed granite within a single block, and the two materials move at different rates with moisture. A flat-valley Fresno spec, typically a 4-inch sand-set base, can’t bridge that transition. We spec a 6-inch crushed granite base over permeable geotextile, with a screeded bedding layer so the pavers can flex at the joints instead of cracking. Call (877) 610-1318 and we’ll walk your actual lot before we write the scope.
Yes, and it happens more often in the master-planned east Clovis communities than people expect. Many Clovis HOAs maintain a finish schedule that covers paver color, pattern, and even joint sand color. If your written scope includes a paver that isn’t on the HOA’s approved list, permit review can stall. We pull the HOA spec before we order materials, so the first bid is the bid that passes. Call (877) 610-1318 if you’re in a Clovis HOA and want to know what your finish schedule allows.
On a typical Clovis paver driveway, polymer-sand joints add roughly $1,200 to $2,500 to the total job versus mortar-set. The gap comes from the material cost and the extra time to broom and activate the sand properly in high heat. Mortar-set is cheaper on day one, but on Clovis’s adobe-to-granite soil it cracks at the joints within one winter rain season. That means you’d pay the cheap spec twice.
Not usually. Post-tension cables are standard for the hillside lots where decomposed granite meets expansive clay, and structural engineers specify them to resist differential movement. Most 93611 and 93612 ranches sit on flatter adobe clay, where a properly compacted base and strategic control joints are usually enough. But if your 93611 lot sits near a drainage swale or a known heave zone, we’ll recommend an engineer review before we pour. Call (877) 610-1318 for a site walk and a straight answer.
We can resurface it, but we can’t pull a permit until the existing work is brought into compliance, which sometimes means exploratory saw cuts to verify subgrade compaction. If the original lift went down without the city’s sign-off, Clovis may want a field density test before we overlay. We handle all of that: we schedule the test, we document the results, and we get the resurfacing permitted. Call (877) 610-1318 for a free estimate and we’ll tell you what your 93619 driveway needs to get legal and flat.
Call Barrett & Sons Construction for Your Clovis Driveway or Paver Project
This page is written to give you exactly what the national quote mills won’t: the local specs that keep a Clovis driveway from failing in five years. Paver base depth, concrete mix, polymer-sand joints, HOA finish schedules, the soil transition at 93619. Now you know what to ask for. The next step is a free estimate, written line-item, with Tom Barrett’s name and license number printed on it. Call (877) 610-1318 and ask for the Clovis driveway team. We’ll walk your lot, show you the soil, and give you a price that’s on paper before you sign anything.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Clovis since our founding in 1998.