Andersen Bathroom Remodeling Nationwide | Barrett & Sons Construction

Andersen Bathroom Remodeling: The Los Angeles Owner’s Guide

Andersen bathroom remodeling in Los Angeles typically runs $10,620 to $33,040 installed, and we stock most Andersen-compatible window and door hardware on the truck so most replacements are done in a single visit. Most homeowners discover they need this work after a shower valve freezes up, a window casing rots through, or an Andersen pocket door jumps its track. Here’s what’s happening, what it costs, and how we fix it.

Call (877) 610-1318

Key Takeaways:

• Full Andersen bathroom remodels in Los Angeles range $10,620-$33,040; smaller swaps like vanity or shower work run $5,310-$14,160.
• We’re an independent Los Angeles contractor, not affiliated with Andersen, but we install and match Andersen parts every week.
• 90-Day Done Right Promise in writing, permits pulled, and every change order signed before work starts.

Which Andersen Models This Applies To

Most of the Andersen-related bathroom calls we take in Los Angeles involve three product lines: the 400 Series windows (the most common in older Los Angeles bathrooms, especially in Valley homes built in the 80s and 90s), the 200 Series (found in newer remodels), and Andersen sliding or French doors used for bathroom-adjacent patio or deck access. If your bathroom window has a crank-out casement, look at the glass corner for an etched Andersen logo and a serial number; that tells us the series, size, and glass type without guesswork.

One gotcha that trips up Los Angeles homeowners: Andersen changed its hardware dimensions between series generations, so a 400 Series sash lock from 2005 will not fit a 400 Series from 2019 even though both say “Andersen.” Your measurements matter more than the brand name. Bring us the sash width, the glass unit thickness, and a photo of the lock or hinge; we’ll match it before we schedule. We use OEM Andersen parts when they’re available and still in production, and quality aftermarket equivalents from Winco or Truth when a line has been discontinued. For bathroom-adjacent trim and casing, we carry KraftMaid, Cambria, and Silestone in our showroom lineup to match what you already have.

Signs Your Andersen Bathroom Remodeling Is Failing

• Fog between the glass panes. When the seal on an Andersen insulated glass unit fails, the argon leaks out and moisture gets in. This is the number one reason Los Angeles bathroom windows get replaced; our wet winters make seal failure show up fast. Once the fog is visible, the glass is dead; you reseal or replace the sash.
• The casement crank spins but the window doesn’t move. That’s a stripped operator gear or a broken hinge shoe. It usually starts with stiffness (salt air and mineral dust in Los Angeles gunk up the tracks faster than most people realize), then the gear teeth shear. The fix is a new operator assembly, not just a new crank handle.
• Water stains on the interior sill or wall below the window. This is rarely a failed glass seal and almost always a failed flashing or a clogged weep hole in the frame. In Los Angeles, dust plus the winter rain cycle clogs Andersen sill weeps within a few years. Water backs up, runs inside, and rots the drywall below. By the time you see the stain, the framing behind it may already be soft.
• A pocket door that drags or falls off its track. Andersen pocket door frames in bathrooms take a beating from steam and temperature swings. The wheels wear flat on one side, the track collects grit, and the door starts scraping the floor. Left alone, it eventually jumps the track and swings into the wall cavity; at that point, you’re opening drywall to retrieve it.
• Black staining on grout or silicone around the window or shower door trim. That’s mold feeding on cellulose sealant that has cracked and stayed damp. In a Los Angeles bathroom with less ventilation than newer codes require, this moves fast. It’s a bigger problem than aesthetics; the framing behind that trim is holding moisture too.

Replacement Cost & What’s Included

Andersen bathroom remodeling prices in Los Angeles break down like this:

The range depends on whether we’re pulling the old window and resetting flashing (required if water got into the frame), whether the bathroom has one plumbing wall or three, and whether you want a stock Andersen sash or a custom-sized replacement with tempered glass. Every quote includes parts, labor, disposal, and the permit when one’s required. Ninety percent of our Los Angeles bathroom window and hardware swaps don’t need a permit, but when they do-structural header changes or moving a plumbing fixture-we pull it and the inspection gets signed. You’ll see the finished job before you pay a cent over the written quote, because every scope change arrives as a written change order first. That’s Tom Barrett’s rule, and his sons’ crews enforce it on every job.

DIY or Call Us?

What you can safely do: clean the tracks, check weep holes for debris with a straightened paper clip, and snap a photo of the serial number before you call. What we’d warn you against: pulling an Andersen window sash off a second-story Los Angeles bathroom wall without a spotter, because a double-hung sash with tempered glass runs forty to sixty pounds and a dropped one takes out whatever is under it, including you. Casement spring systems and pocket door tension adjustments are under load; when they release, they release all at once. If your Andersen bathroom fixture involves gas, electrical, or a window above the first floor, call (877) 610-1318 and let us handle it. One of us will answer.

FAQs