Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterDvele Construction in Naples, CA | Barrett & Sons Construction
We provide independent Dvele construction service across Naples, from Old Naples cottages to Pelican Bay condos. The one thing that makes our Dvele work here different: we know how salt air off the canals eats at steel-frame-to-SIP junctions, and we know how Collier County’s post-Ian permit backlog changes every repair timeline. If you own a Dvele home in Naples and something’s not right, call (877) 610-1318 and we’ll come look.
We’re Barrett & Sons Construction, founded in 1998 and run by Tom Barrett. We’re not a Dvele dealer. We’re the crew other Naples builders call when a panelized home needs envelope work done right.
Why Naples Residents Choose Us for Dvele Service
Most construction crews in Collier County aren’t Dvele specialists who have opened up these walls. We have. Tom Barrett grew up in the San Fernando Valley watching crews pour foundations on Van Nuys Boulevard, learned the trade at LA Trade-Tech, and spent two decades building and remodeling before his oldest boy picked up the same tools. When a Dvele envelope needs a retrofit, that background matters because the steel frame inside those panelized walls doesn’t forgive sloppy work.
We’ve completed multiple Dvele envelope retrofits and panel realignments for Dvele service in Bonita Springs and on elevated coastal homes in Naples. We know the steel-frame-to-SIP junction tolerances, and we know how to re-commission DveleIQ sensors after any structural disturbance. We carry genuine Dvele factory-sourced panel sections and flashings whenever the job calls for them. And we answer our own phone.
Common Dvele Construction Problems We Solve in Naples
Here’s what we actually see on Dvele homes in Naples:
- Panel joint sealant degradation from salt-air corrosion. Dvele’s painted steel frame and SIP edges sit hard against Naples’ brackish canal air. The factory butyl sealant oxidizes along the lower flange, and hairline water intrusion shows up around window and door openings. We see this most often in Aqualane Shores and Port Royal, where homes sit within a few hundred yards of open water.
- DveleIQ sensor misreading after slab settlement. Naples’ water table sits 18-24 inches below grade in many areas. Minor foundation shifts on high-water-table slabs trigger false humidity and leak alerts. We recalibrate sensors instead of tearing into walls that don’t need it.
- Exterior cladding separation at panel butt joints. When Dvele’s EPS foam cores absorb brackish canal moisture during long post-Ian reconstruction delays, the cladding pulls away at the joints. This is a repair, not a replacement, unless the connectors are corroded.
- Smart shading motor burnout from storm-surge power spikes. Ian’s surges fried more than a few factory-installed shading motors in Naples. We replace the module, not the panel, using Dvele-approved aftermarket equivalents.
- Wind-load and elevation certification gaps. You can’t schedule a foundation or roof inspection in Collier County right now without pre-engineered wind-load calcs and elevation certificates. We front-load that documentation before we pull the permit.
Dvele Service in Naples: What Local Conditions Mean for Your Equipment
Collier County’s post-Hurricane Ian permit backlogs pushed inspection wait times to 6-12 months in 2023 and 2024. That changed how every Dvele envelope repair or panel replacement in Naples’ 34102 and 34103 ZIPs gets done. The city won’t even schedule a foundation or roof inspection until the wind-load calculations and elevation certificate are on file. No neighboring market faces that same bottleneck. For Dvele owners in Old Naples or Port Royal, this means a simple sealant repair can’t start the old way. You pull a permit, you wait, you watch a small leak become a bigger one. We learned to front-load the paperwork: pre-engineered truss packages, third-party wind-load calcs, elevation certificates, all submitted before we ask for the inspection date. It keeps a three-week repair from turning into a six-month nightmare. That’s the kind of thing you only learn working in Naples, not reading a spec sheet.
Dvele Models & Products We Service in Naples
We service the full Dvele line: the Dvele IQ Whole Home, the Dvele ADU Series (360/480/720), the Dvele Signature Series (Sanctuary and Horizon), and Dvele Custom Panelized Homes. For panel sections and flashings, we use genuine Dvele factory parts whenever they’re available. For failed smart components or mechanicals, we turn to Dvele-approved aftermarket equivalents. That saves you from a five-figure module swap when a $400 motor is the actual problem. We keep common sealants, backer rod, and sensor components stocked locally so Naples turnaround doesn’t depend on a parts shipment from out west. If the steel frame is intact, we repair the SIP envelope and sealant system. If corrosion has compromised the structural connectors, we’ll tell you honestly and replace what actually needs replacing.
Dvele Service Pricing in Naples
Here’s what Dvele work in Naples typically runs:
| Service | Price Range |
|---|---|
| Dvele panel sealant replacement per window/door opening | $400 - $1,800 |
| DveleIQ sensor recalibration and system test | $600 - $2,500 |
| Impact window replacement on Dvele home | $8,000 - $25,000 |
| Roof replacement for Dvele panelized roof | $8,000 - $20,000 |
What drives the cost: how many panel joints failed, whether the steel frame needs re-priming, and whether the city requires a wind-load recalc before we can touch anything. Our free estimate includes a written line-item scope, so you know exactly where the money goes before any work starts. Call (877) 610-1318 for exact numbers on your Dvele home.
Serving Naples, FL - Our Local Coverage Area
We’re based in the Naples area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Dvele Construction in Naples
Most shifted panel seams in Naples can be realigned and re-sealed without replacing the panel. We inspect the steel frame connectors first. If they’re intact, we reset the seam, install new backer rod and marine-grade sealant, and re-commission the sensors. Full panel replacement is only necessary when corrosion has eaten into the structural steel. Call (877) 610-1318 and we’ll tell you which one you’re dealing with.
We replace the motor, not the panel. The shading module itself is a serviceable component, and Dvele-approved aftermarket equivalents work just as well at a fraction of the cost of a full module swap. A whole-panel replacement for a burnt motor is what manufacturers quote when they don’t want to send a tech out.
Yes. Collier County won’t schedule the roof inspection without a current wind-load calculation and elevation certificate on file. We handle that documentation before we pull the permit, which is the only way to keep the job moving through the inspection backlog. Call (877) 610-1318 and we’ll walk you through what your specific roof needs.
First thing on our Kitchen Remodeling in Naples or any Dvele project is the sealant along the steel frame lower flange at window and door openings. Naples’ salt air accelerates butyl sealant oxidation, and hairline intrusion at the flange trips the humidity sensor long before you see a stain. We pull the interior SIP skin at the suspect opening and inspect the flange directly. If the sealant’s gone chalky, that’s your answer.
Usually, yes. A crack in the EPS foam core or exterior cladding doesn’t automatically mean panel replacement with Naples Bathroom Remodeling or any Dvele repair. We assess the steel frame behind the crack. If the frame is solid, we repair the SIP core, re-bond the cladding, and seal the joint properly. Replacement only happens when corrosion or structural damage has compromised the connectors.
Service Areas Near Naples
We serve Naples’ core ZIPs: 34105, 34106, 34107, and 34108. Beyond Naples, we take Dvele service calls in Bonita Springs and Port Charlotte. If you’re south of the Collier line in a Dvele home, give us a call and we’ll figure out the drive. Our Naples coverage also ties into our broader Naples service area work.
Book Your Dvele Service in Naples Today
If your Dvele home needs envelope work, sensor recalibration, or a straight answer about what’s actually wrong, call (877) 610-1318. We’ll schedule a free estimate and show up when we say we will. We’ll do it right the first time, or we’ll come back and make it right.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Naples since 1998.