Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterDvele Construction in West Palm Beach, CA | Barrett & Sons Construction
We’re Barrett & Sons Construction, an independent Dvele service provider in West Palm Beach, CA. Tom Barrett and his sons have run crews across Palm Beach County since 1998. The thing that separates our Dvele work in West Palm Beach from anyone else’s: we’re the only local crew who routinely satisfies the Historic Preservation Board and the Florida Building Code’s 160 mph wind-load provisions on the same 1920s hollow clay tile house, without voiding the Dvele envelope warranty. Call (877) 610-1318 for a straight answer on your project.
Why West Palm Beach Residents Choose Us for Dvele Service
Tom Barrett learned framing at Los Angeles Trade-Technical College, then spent the better part of two decades on our Kitchen Remodeling in West Palm Beach and other projects before his oldest boy showed the same interest in tools at sixteen. That’s how Barrett & Sons started, and that’s who still runs the crews. We are not a franchise dispatching strangers. When you call about Dvele construction in West Palm Beach, you’ll speak to someone who has physically worked on Dvele panel systems here, in this coastal environment, where salt air eats fasteners and wind loads push every seam.
We’ve completed multiple Dvele panel-based additions, envelope upgrades, and full interior retrofits across West Palm Beach’s historic districts and coastal zones. That field time matters because Dvele’s SIP-and-steel frame system behaves differently here than it does in a dry inland climate. We know where the problem spots are, we know which parts fail first, and we know what to specify so the repair actually holds. People in El Cid, Flamingo Park, and the western CBS tracts call us because we answer the phone and we put every scope in writing before a single panel moves. Our Dvele sales & service depth means you’re not explaining your home to someone who has never touched a Dvele panel.
Common Dvele Construction Problems We Solve in West Palm Beach
Dvele builds a well-engineered product, but West Palm Beach pushes every system harder than most places. Here’s what we see most often, and what we do about it:
- Wind-driven rain intrusion at panel-to-panel seams. During tropical storm gusts exceeding 120 mph, flat or low-slope roofs on Dvele Signature Series homes in coastal ZIPs let water find its way into seams that held fine in normal weather. We pull the affected gasketing, inspect the panel edges, and re-seal with Dvele OEM panel connectors and gasketing to keep the envelope’s shear-transfer design intact. This is not a caulk-and-pray fix.
- Corrosion of embedded steel connectors and fasteners. Persistent salt-laden air off Lake Worth Lagoon attacks the steel hardware between Dvele’s SIP panels and foundation clips. We replace with South Florida-rated corrosion-resistant fasteners, never bare steel. A connector that looks fine on the outside can be structurally compromised inside the wall cavity.
- Stucco cracking and delamination at the steel-frame-to-SIP marriage line. Thermal cycling and high humidity in Mediterranean and Mission-style Dvele additions stress the line where steel meets SIP. We see this constantly in the 33401 and 33405 ZIPs. The fix involves proper lath detailing, compatible base coats, and a finish that moves with the two substrates instead of fighting them.
- Differential settlement where Dvele additions meet 1920s-1940s hollow clay tile masonry. The original home moves one way; the new Dvele panelized addition moves another. Interior shear cracks show up at the transition. We match the connection details to the existing structure and allow for the differential movement before finishes go on, so the crack doesn’t come back through your new paint.
- Insurance-driven opening protection shortfalls. Western West Palm Beach CBS tract homes from the 1980s-2000s pre-date current Florida Building Code wind-load standards. When we do a Dvele retrofit or structural opening, we field questions about impact windows and doors, because the insurance carriers in 33411 and 33412 won’t write a policy without them. We handle that as part of the scope, not as a surprise at the end.
Dvele Service in West Palm Beach: What Local Conditions Mean for Your Equipment
West Palm Beach is the only city in Palm Beach County where contractors must routinely navigate both the Historic Preservation Board’s requirement to match 1920s hollow clay tile stucco profiles AND the Florida Building Code’s 160+ mph wind-load mandates for any Dvele addition. Lake Worth Beach and Riviera Beach don’t apply this dual constraint with the same intensity. What that means for a Dvele owner is simple: a builder working a mile outside the district boundary never deals with custom millwork lead times or hand-troweled stucco profiles, and a generic Dvele installer doesn’t know that the HPB will send your drawings back three times unless the window configurations match the original Mediterranean Revival building. Matching original stucco profiles and window configurations for HPB approval routinely adds two to four weeks and 15-20% to a renovation budget here. If your contractor doesn’t build that into the schedule and the change order, you’ll find out about it at the worst possible time. We build it in from the start. Our West Palm Beach service area work is planned around the HPB calendar, the wind-load engineering, and the salt-air material specs, because all three are non-negotiable here.
Dvele Models & Products We Service in West Palm Beach
We service the Dvele Signature Series, Axiom Series, Panelized Addition Systems, and Integrated Accessory Dwelling Units. Every one of these lines shows up in West Palm Beach homes, and each has specific failure points in this climate. For envelope-critical joints, we specify Dvele OEM panel connectors and gasketing to maintain the system’s airtight and shear-transfer design. For flashing, fasteners, and exterior claddings, we use premium South Florida-rated aftermarket products proven in salt-air environments. And when a SIP panel shows visible water staining or delamination, we replace it, not patch it. We keep the common Dvele connectors, gaskets, and corrosion-resistant fasteners in our local inventory, so service in West Palm Beach doesn’t wait on a shipment from the manufacturer.
Dvele Service Pricing in West Palm Beach
Here’s what we quote, in writing, before we start. These are real numbers for West Palm Beach work, where wind-load engineering, HPB review time, and salt-air material upgrades add cost a Central Florida contractor might not even know to include.
| Scope | Typical Range |
|---|---|
| Dvele panelized addition engineering and installation (per project) | $45,000 - $130,000 |
| Full kitchen remodel within a Dvele home | $14,000 - $45,000 |
| Full bathroom remodel within a Dvele home | $9,000 - $28,000 |
| Roof replacement compatible with Dvele envelope | $8,000 - $20,000 |
| Impact window installation for Dvele retrofit | $8,000 - $25,000 |
Every price change arrives as a written change order before work happens. No surprise invoices at the end, because an allowance that isn’t on paper is a surprise waiting for a date. Call (877) 610-1318 for your free estimate, and we’ll walk the site with you.
Serving West Palm Beach, FL - Our Local Coverage Area
We’re based in the West Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Dvele Construction in West Palm Beach
Yes, with the right connection details. Our crew recently installed a Dvele Panelized Addition on Flagler Drive in El Cid, where the original 1930s hollow clay tile home needed a second-story Dvele Signature Series addition, but the Historic Preservation Board required matching Mediterranean stucco texture. We configured Dvele’s steel-frame clips with stainless anchors into the clay tile, added a custom through-wall flashing detail for salt-air corrosion, then applied a hand-troweled stucco profile that matched the 1930s original. The permit took nine weeks because of the HPB review, but the addition passed wind-load and finish inspections on the first attempt. Call (877) 610-1318 and we’ll explain what your specific El Cid home needs.
Dvele’s engineered seam system is designed for high-wind zones, but the real-world performance depends on installation quality and maintenance. The steel-to-SIP connections hold when the gasketing is intact, the fasteners are corrosion-resistant, and the flashing details were done right. Our crews have inspected seam failures in coastal West Palm Beach ZIPs where the original installation cut corners on sealant or used fasteners not rated for salt air. We replace with Dvele OEM connectors and gasketing and bring the seams back to spec. Call (877) 610-1318 for a seam inspection.
Often yes. In Grandview Heights and other West Palm Beach historic districts, exterior work including stucco repair typically requires HPB approval before the city issues a permit, especially when the finish profile or color could change. The stucco on a Dvele addition’s steel-frame-to-SIP marriage line is not a cosmetic patch job when it cracks; it’s an envelope repair. We handle the HPB paperwork for you. Call (877) 610-1318 and we’ll pull the permit before you pull a muscle worrying about it.
Yes, over time. Persistent salt-laden air off Lake Worth Lagoon accelerates corrosion of the embedded steel connectors and fasteners between Dvele’s SIP panels and foundation clips. Homes closer to the Intracoastal, especially in the 33401 and 33405 ZIPs, show the fastest corrosion. We replace with South Florida-rated corrosion-resistant fasteners and through-wall flashing details that are made for this environment. The fix is far cheaper than the repair you’ll need if the connector fails during a storm. Call (877) 610-1318 for an inspection.
Yes, and we do it regularly in the 33411 and 33412 ZIPs. The 1980s-2000s CBS tract homes pre-date current Florida Building Code wind-load standards, so the structural opening requires engineering, likely opening-protection upgrades, and possibly a full permit set. We handle the engineering, the permit, and the Dvele panel work. Expect to budget for impact windows or doors as part of the scope, since insurance carriers in western West Palm Beach won’t write a policy without them. Call (877) 610-1318 for a quote with the real numbers up front.
Service Areas Near West Palm Beach
We cover West Palm Beach and the surrounding areas, including the historic districts of Flamingo Park, El Cid, Old Northwood, and Grandview Heights, plus the western CBS tracts in 33411 and 33412. We also run Dvele jobs in Dvele service in Hialeah and Dvele service in Pompano Beach when the project calls for it.
Book Your Dvele Service in West Palm Beach Today
We’ll do it right the first time, or we’ll come back and make it right. That’s our 90-Day Done Right Promise, written on every contract. Call (877) 610-1318 for your free estimate, and we’ll put the whole scope in writing before a single panel moves.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving West Palm Beach since 1998.