Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterDvele Construction in Fort Lauderdale, CA | Barrett & Sons Construction
We build, renovate, and repair Dvele panelized homes across Fort Lauderdale, from Victoria Park to the finger islands off the Intracoastal. We’re independent Dvele specialists with hands-on experience in Fort Lauderdale’s salt air and HVHZ wind-load requirements, and we’re not manufacturer-authorized or endorsed. If your Dvele Axis, Haven, Park, or Quattro home needs an addition, a roof replacement, or panel repair that will actually pass Broward County inspection the first time, call Tom Barrett and his crew at (877) 610-1318.
Why Fort Lauderdale Residents Choose Us for Dvele Service
Dvele homes aren’t stick-built. They arrive as factory-assembled panel systems with steel framing, engineered wood SIPs, and a sealed envelope that has to be handled differently than a standard concrete-block house. Tom Barrett learned the trade at Los Angeles Trade-Technical College, and he’s been running Barrett & Sons since 1998 with his sons on the crews. When a Dvele panel joint cracks on a 1950s slab in Coral Ridge, we know whether that’s a fastener problem, a settlement problem, or a moisture problem before we open the wall. That’s the difference between a repair that holds and one that fails again in eighteen months.
We carry OEM-compatible Dvele replacement panels, stainless fasteners rated for coastal exposure, and Florida-approved weather-resistive barriers. We pull permits on every eligible job and we put every change order in writing before work moves. If you live in Fort Lauderdale and own a Dvele, you’ll want a crew that already knows the house system, not one learning on your dime.
Common Dvele Construction Problems We Solve in Fort Lauderdale
- Corrosion in steel panel-to-foundation connections. Salt-laden onshore air works on steel framing constantly, especially within a few blocks of the Intracoastal. We see corroded base tracks and anchors on finger-island Dvele homes that require stainless replacement fasteners and re-flashing to restore the envelope.
- Delamination at engineered wood SIP bottom plates. Canal-adjacent soil moisture wicks into wall assemblies and softens the bottom plates of Dvele panels. In Tarpon River and Coral Ridge, this shows up as swelling, dark staining, or a musty smell behind baseboards. We cut out the damaged section and re-detail the weather-resistive barrier.
- Hairline cracks in panel seams over older slabs. Dvele panels are rigid. When they sit on a 1940s or 1950s concrete slab that’s settled even a quarter inch, the seams open up. This is common in Victoria Park, where original slabs predate modern soil preparation. We re-shim steel posts and re-fasten bottom tracks rather than masking the crack with caulk.
- HVAC condensation drainage inside sealed wall cavities. Dvele’s airtight envelope is great for energy efficiency, but if condensate lines aren’t insulated to Florida code, the trapped moisture breeds mold inside walls. Fort Lauderdale humidity makes this a faster failure than you’d see inland. We correct the insulation and dry out the cavity before closing.
- Stucco and fiber-cement panel joint failures from differential settlement. Where new Dvele additions tie into older block homes, the two systems move differently. Fort Lauderdale’s tidal soil cycles exaggerate that movement. We install movement-tolerant joint details and re-tape seams so they hold through wet and dry seasons.
Key takeaways: Independent Dvele specialists, not factory-authorized. We carry OEM-compatible parts and Florida-rated fasteners. Every permit gets pulled and every price change comes in writing. Call (877) 610-1318 for a free estimate.
Dvele Service in Fort Lauderdale: What Local Conditions Mean for Your Equipment
Fort Lauderdale’s 165+ miles of navigable canals aren’t just scenery. On canal-front lots in Coral Ridge and the finger islands, any permitted addition, ADU, or major renovation must satisfy Broward County’s seawall setback rules and HVHZ wind-load documentation at the same time. Pompano Beach and Hollywood simply don’t apply that same combination to the same residential density. For a Dvele owner, that means a straightforward addition can get held up because the existing seawall has rotated inward and shifted the slab beneath the panelized wall. We saw exactly this on a Coral Ridge Dvele Axis addition: hairline cracks opened in the panel joints above a 1950s slab. The seawall had deflected inward, causing subtle settlement beneath the steel posts. After the owner completed a county-permitted seawall reconstruction, we re-shimmed the posts, re-fastened the bottom track with stainless anchors, and re-taped the panel seams. The addition now passes wind-mitigation inspection at 170 mph design pressure. If you own a Dvele on a canal lot in Fort Lauderdale, this is the sequence county inspectors will require. We plan for it from day one instead of discovering it mid-permit.
Dvele Models & Products We Service in Fort Lauderdale
We work on the full Dvele lineup: Axis Series, Haven Series, Park Series, and Quattro Series. That includes additions, whole-home renovations, ADU conversions, and roof replacements on Dvele’s panelized systems. Where the panel core is intact, we repair rather than replace. Full panel replacement on a one-off site-built Dvele home can take weeks and require crane access, so we re-shim, re-fasten, re-tape, and re-flash whenever the structural panel itself is sound. For structural or warranty-critical work, we specify genuine Dvele replacement panels and fasteners. For non-structural adaptations like interior finishes or exterior trim, we use high-grade, Florida-approved aftermarket fasteners and sealants. We carry common Dvele-compatible components locally so Fort Lauderdale jobs don’t wait on cross-country freight.
Dvele Service Pricing in Fort Lauderdale
Here’s what Fort Lauderdale Kitchen Remodeling and other Dvele construction work typically runs in the local market. These are planning numbers, not a bid. Your free estimate will be line-itemed and specific to your house.
| Project | Typical Range |
|---|---|
| Home Addition | $45,000-$130,000 |
| ADU Construction | $90,000-$220,000 |
| Roof Replacement | $8,000-$20,000 |
| Impact Window Installation | $8,000-$25,000 |
What drives the cost on a Dvele home in Fort Lauderdale is usually condition of the existing panel system, whether the slab has settled, and whether seawall or HVHZ upgrades get triggered for our Bathroom Remodeling in Fort Lauderdale or other projects. A free estimate from us includes a written, line-item price. Calls are answered by a live person at (877) 610-1318.
Serving Fort Lauderdale, FL - Our Local Coverage Area
We’re based in our Fort Lauderdale service area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Dvele Construction in Fort Lauderdale
Yes. Any canal-front addition or ADU in Fort Lauderdale must satisfy Broward County’s seawall setback rules and HVHZ wind-load documentation simultaneously. Your permit package has to show the existing seawall is stable or specify its reconstruction before the addition gets finaled. Call (877) 610-1318 and we’ll tell you what your specific lot will trigger.
The sealed envelope requires special treatment. Standard stucco patching will crack at the panel joints because Dvele panels move as rigid units. We re-tape seams with movement-tolerant materials and re-flash with Florida-approved weather-resistive barriers before any finish coat goes on.
Differential settlement. The original 1940s and 1950s concrete slabs in Victoria Park and on finger-island lots weren’t engineered for the soil movement Fort Lauderdale’s tidal conditions produce. A Dvele panel system is rigid, so settlement shows up as hairline cracks at the seams. The fix is re-shimming steel posts and re-fastening bottom tracks, not caulk. Call (877) 610-1318 for an exact assessment.
Yes. Fort Lauderdale sits fully inside Florida’s High-Velocity Hurricane Zone, so any roof replacement on a Dvele home must meet 170+ mph design-pressure standards. That includes the roofing assembly, fasteners, and the connection from roof to the Dvele panel walls. We specify systems that pass Broward County wind-mitigation inspection the first time.
Salt-laden onshore air accelerates corrosion on steel framing components, especially panel-to-foundation connections within a few blocks of the Intracoastal. Over time, standard fasteners rust and lose tension, which can open panel seams. We replace them with stainless steel anchors rated for coastal exposure. Call (877) 610-1318 and we’ll inspect your panel system.
Service Areas Near Fort Lauderdale
We serve Fort Lauderdale’s core neighborhoods: Victoria Park, Tarpon River, Coral Ridge, and the finger islands. We also take Dvele calls from Hollywood, Pompano Beach, and the surrounding Broward County communities. If you’re outside that area, call us anyway. Tom Barrett lives twenty minutes away and he’d rather hear about it than not.
Book Your Dvele Service in Fort Lauderdale Today
Call (877) 610-1318 for a free estimate on your Dvele construction project in Fort Lauderdale. Tom Barrett and his sons run the crews themselves. We’ll do it right the first time, or we’ll come back and make it right.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Fort Lauderdale since 1998.