Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterDvele Construction in Pomona, CA | Barrett & Sons Construction
We’re an independent Dvele service provider working across Pomona, and the short answer is this: if your Dvele home is showing panel seam cracks, stucco delamination, or drainage problems, the likely culprit is the city’s expansive clay soil and the Pomona fault running underneath it, not the home’s steel frame. Nobody else in Pomona stocks Dvele-compatible tie-downs, sealants, and flashing locally, and nobody else carries the dual fault-zone plus clay-soil permitting sequence in their head before they even knock on your door. Call us at (877) 610-1318 for a free estimate.
We’ve been doing Dvele sales & service work long enough to know that factory-panelized homes are brilliant, but they don’t forgive shortcuts, especially on Pomona’s soil. Tom Barrett started Barrett & Sons in 1998, and we’ve spent the better part of two decades building and remodeling across Los Angeles. Every job gets permits pulled, every price change arrives as a written change order, and every completed job is backed by our 90-Day Done Right Promise.
Why Pomona Residents Choose Us for Dvele Service
Most contractors in Pomona have never touched a Dvele panel system. They treat it like a standard stucco box, and six months later the seam cracks are back. We don’t. Our crews have retrofitted and remodeled Dvele Origin Series and Dvele Adapt Panel homes across Pomona’s fault-and-clay lot conditions, and we carry the only local inventory of Dvele-compatible panel tie-downs, sealants, and flashing for the San Gabriel Valley’s specific thermal and seismic exposure. We also handle our Bathroom Remodeling in Pomona with the same Dvele-specific expertise.
Tom Barrett grew up in the San Fernando Valley, not far from the old stretch of Van Nuys Boulevard where his dad used to take him to watch crews pour foundations on weekends. He learned the trade at Los Angeles Trade-Technical College, starting with framing and finishing with enough hours in the field to know that the job never lies. His sons run the crews now, on-site most days, not strangers from a dispatch board. Call (877) 610-1318 and a live person answers, 24/7, not a voicemail box in another state.
Common Dvele Construction Problems We Solve in Pomona
- Hairline cracks at steel-frame-to-SIP panel seams. Pomona’s expansive clay heave under slab-on-grade foundations pushes the perimeter up unevenly, especially after winter rains. On Dvele homes, the steel moment connections are rigid, so the movement shows up as hairline fractures at the panel marriage lines. Patching alone fails within two clay-soil seasons, so we install supplemental hold-down anchors and re-grade the first few feet of soil before we ever touch the seam.
- Delamination of Dvele’s exterior smart-shading trim. Repeated 105°F summer thermal cycling, combined with stucco moisture intrusion common to postwar Pomona homes, causes the exterior trim layers to peel and separate. We see this on the 1950s and 60s tract homes across the 91766 and 91767 ZIP codes, where original stucco-over-wood-frame construction traps moisture against the panel edge.
- Cripple wall anchorage gaps where Dvele panelized walls meet unreinforced 1950s slab perimeters. Home inspectors routinely flag anchor bolt deficiencies on Pomona homes during escrow. When a Dvele addition was bolted onto an older slab that lacks anchor bolts within 18 inches of the steel frame, the connection is vulnerable. We add supplementary hold-downs before any remodel touches that junction.
- Santa Ana wind-driven water intrusion at roof-to-panel junctions. Pomona sits at the eastern pinch point of the San Gabriel Valley, where sustained gusts routinely hit 50 to 60 mph in fall. Low-slope and flat roof profiles on Dvele additions along Holt Avenue and the Route 66 corridor take wind-driven rain differently than coastal LA contractors expect, and the roof-to-panel junction is the first place it leaks.
- Thermal cycling flat-roof problems on Dvele additions. Summer valley temperatures over 105°F cause significant thermal cycling on flat and low-slope roofs, common on mid-century buildings along Holt Avenue. On Dvele additions with those profiles, the membrane and flashing degrade faster than on pitched roofs elsewhere in the city.
Dvele Service in Pomona: What Local Conditions Mean for Your Equipment
Pomona is the only city east of the San Gabriel River where the Pomona fault’s official Alquist-Priolo special studies zone intersects fully within city limits AND expansive clay soils reach ‘very high’ swell potential in the same lots. That’s not true in Claremont, La Verne, or Ontario, each of which avoids one or both of those conditions partly or wholly. What that means for a Dvele owner is concrete: any Dvele addition over 500 square feet, or any ADU excavation deeper than 3 feet, triggers both a fault-rupture setback review and a geotechnical report before the city will even look at your plan. Most contractors get to that permit counter and stall out. We walk in with the sequence already mapped, because we’ve done it on Dvele homes across Pomona’s 91768, 91769, 91797, and 91766 ZIP codes.
At a 1958 Dvele Origin home in the Lincoln Park neighborhood, our crew was called after the owner noticed a widening crack at the panel marriage line above our Kitchen Remodeling in Pomona addition. We exposed the foundation and found the original slab had no anchor bolts within 18 inches of the Dvele steel frame, and the clay had heaved the perimeter up 3/4 inch. We installed supplemental hold-down anchors, re-graded the first four feet of soil, sealed the panel seam with Dvele-spec polyurethane, and rebuilt the stucco flashing, then passed the city’s follow-up inspection without reopening the panel. That’s what we do differently.
Dvele Models & Products We Service in Pomona
We service the Dvele Origin Series, the Dvele Adapt Panel System, the Dvele ADU Series, and the Dvele Home Kit. For structural components, we source only factory-spec panel hardware and sealants, no substitution, because the steel moment connections are proprietary. For interior finishes and fixtures, we use quality aftermarket equivalents like cabinetry and counters when they meet or exceed Dvele’s thermal envelope requirements. We stock Dvele-compatible tie-downs, sealants, and flashing locally in Pomona, which means faster turnaround than a shop that has to order parts from out of state. And we’ll tell you plainly when replacement beats patching: panel seam cracks over 1.5 mm or stucco delamination over 2 square feet are replacement territory, because patching fails within two clay-soil seasons here.
Dvele Service Pricing in Pomona
| Service | Price Range |
|---|---|
| Full Kitchen Remodel | $14,000 - $45,000 |
| Home Addition | $45,000 - $130,000 |
| ADU Construction | $90,000 - $220,000 |
| Roof Repair | $400 - $1,800 |
| Roof Replacement | $8,000 - $20,000 |
What drives the cost on a Dvele job in Pomona is the soil work. Geotech reports, supplemental hold-downs, re-grading, and fault-zone setback reviews add line items that a standard remodel in Chino or Covina doesn’t carry. Our free estimate is a written line-item quote, not a phone number and a shrug. Every allowance goes on paper before work starts, and every price change arrives as a written change order before a single nail moves. Call (877) 610-1318 for an exact quote, estimates are free.
Serving Pomona, CA - Our Local Coverage Area
We’re based in the Pomona area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Dvele Construction in Pomona
Yes, if any portion of the lot falls inside the Alquist-Priolo special studies zone, the city will require a fault-rupture setback review and, for any excavation deeper than 3 feet, a geotechnical report, regardless of where the ADU footprint sits on the lot. Because Pomona’s zone intersects fully within city limits and the clay swell potential reaches ‘very high’ on those same lots, the dual trigger applies more often here than in neighboring cities. Call (877) 610-1318 and we’ll tell you what your specific parcel triggers before you spend money on plans.
Pomona’s expansive clay soils heave the slab perimeter unevenly during winter rain events, and Dvele’s rigid steel moment connections don’t flex, so the movement concentrates as hairline cracks at the panel marriage lines. Chino and Covina sit on different soil compositions with lower swell potential, so the same Dvele panel system behaves differently there. We install supplemental hold-down anchors and re-grade the first four feet of soil to reduce the heave before sealing the seam.
Adding a second story to a Dvele home in Lincoln Park triggers historic district review, which demands period-appropriate materials and additional permitting scrutiny for any structural renovation. Dvele’s panelized steel frame can support a second story, but the city will require engineering documentation and, given Pomona’s fault-and-clay conditions, a geotechnical report. We’ve navigated that review process before and can tell you upfront what’s approvable and what isn’t.
Yes, a Dvele roof repair on a low-slope or flat profile along Holt Avenue should account for Santa Ana wind events with sustained gusts of 50 to 60 mph, which coastal contractors often underestimate. The roof-to-panel junction and flashing need wind-driven rain detailing specific to Pomona’s fall wind pattern. We source Dvele-spec sealants and flashing locally and install to that wind load condition.
We cut and re-seal the factory air barrier with Dvele-spec polyurethane at every penetration, then tape the new dormer or skylight flashing into the existing barrier rather than leaving a gap. On Pomona’s clay-heave lots, that perimeter seal is what keeps panel seam movement from turning into a moisture path. We pass the city’s follow-up inspection without reopening the panel. Call (877) 610-1318 for an exact quote.
Service Areas Near Pomona
Our crews work throughout the San Gabriel Valley and beyond. We serve Pomona’s 91768, 91769, 91797, and 91766 ZIP codes, plus nearby Pomona service area coverage that includes Claremont, La Verne, San Dimas, and Ontario. We also provide Dvele service in Escondido and Dvele service in Torrance for Dvele owners with properties in those cities.
Book Your Dvele Service in Pomona Today
If your Dvele home is showing cracks, delamination, or water intrusion, call (877) 610-1318 for a free written estimate. Tom Barrett’s name, address, and license number are published and verifiable, and the permit inspector works for you, not for us. We’ll do it right the first time, or we’ll come back and make it right.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Pomona since 1998.