Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Miramar, CA | Barrett & Sons Construction
We provide independent Jerith sales & service across Miramar, with crews who know this city’s older CBS housing stock inside and out. What makes our Jerith work different here is simple: we don’t just set posts, we account for the pre-Andrew block walls, shallow footings, and hurricane code that shape every fence and gate job in Miramar’s 33023 corridor. If your Jerith aluminum fence or gate is sagging, rattling, or failing pool code, call us at (877) 610-1318 and we’ll tell you straight what it’ll take to fix it right.
Why Miramar Residents Choose Us for Jerith Service
We’re Barrett & Sons Construction, led by Tom Barrett. Tom grew up in the San Fernando Valley and learned the trade at Los Angeles Trade-Technical College, starting with framing and finishing with enough hours in the field to know the job never lies. For over 29 years, we’ve been the owner-operated, name-on-the-truck alternative to outfits that quote one price on the phone and show up with another. When it comes to Jerith fences and gates in Miramar, that matters because most of the homes here in 33023 were built in the 1950s and 1960s, long before anyone thought about hurricane straps or impact-rated openings-just one reason we approach our Kitchen Remodeling in Miramar with the same structural rigor. We understand how Jerith’s post-and-panel geometry lands on old CBS block, soft mortar joints, and hollow cells that a less experienced crew would simply wedge-anchor and walk away from. We don’t do that. We pull permits, issue written change orders before any scope shifts, and back our work with the 90-Day Done Right Promise.
Common Jerith Construction Problems We Solve in Miramar
Jerith builds a good aluminum fence, but Miramar’s climate and housing stock stress the product in ways the manufacturer’s install manual can’t fully anticipate, much like the hidden challenges we solve with Miramar Bathroom Remodeling. These are the callbacks we fix most often:
- Gate sag at hinge posts on aging CBS block: The hinge post anchors sit in soft mortar joints that crumble over time, letting the gate drop and the latch bind. This is the single most common Jerith repair we handle in Miramar’s older neighborhoods.
- Powder-coat blistering and chalk on flat-top rails: Miramar’s salt-humid air and morning condensation saturate flat-top Jerith rails, eventually lifting the powder coat and leaving that chalky residue on your hands. Coastal exposure makes this worse here than inland.
- Loose post-base plates on older slab-edge installations: Original wedge anchors corrode or bottom out into hollow block, leaving posts wobbling and gates misaligned. We see this on 1950s and 1960s ranches where the patio slab meets the fence line.
- Wind-loosened through-bolts after hurricane gusts: Jerith panels pick up vibration during tropical storm winds, and the through-bolts that hold rails to posts slowly back out. The result is a rattling fence and, on pool-code installations, latch geometry that no longer meets Broward County’s HVHZ requirements.
- Pool-code latch failure on pre-Andrew walls: When the wall adjoining a Jerith pool fence lacks hurricane straps or proper embedment, the gate posts shift under wind load and the self-closing latch geometry fails inspection. This isn’t a Jerith defect, it’s a structural retrofit gap in the original block construction.
Jerith Service in Miramar: What Local Conditions Mean for Your Equipment
Here’s the thing most Miramar homeowners don’t expect when they call about a Jerith fence: in the 33023 corridor, a fence installed around a 1950s CBS home almost never complies with current HVHZ pool-code without a structural tie-down upgrade on the wall adjoining the fence. The original block has no hurricane straps, and the gate posts rarely meet modern embedment depth for the wind loads Broward County now enforces. So what starts as a “rehang my sagging gate” call often becomes a retrofit conversation, and anyone who says otherwise hasn’t pulled a permit in Miramar recently. We deal with this every week on homes along Utopia Drive and the eastern blocks, where the pre-Andrew construction is most concentrated. You can’t see the missing straps from the street, but the code inspector’s review will find them the moment a new fence permit lands on the desk.
Our crew was called to a 1960s ranch on Utopia Drive in eastern Miramar where an existing Jerith Estate Series gate had begun dragging across the concrete driveway. We removed the gate and found both hinge post anchors had sheared at the block face because the original installer set wedge anchors into hollow cells without grout fill. That’s not an installation anyone would repeat if they knew the wall construction. We core-filled the post cells with epoxy grout, installed new stainless through-bolts with steel backing plates, and reset the Jerith hinges with stainless bushings. The gate swings clean and latches under load now.
Jerith Models & Products We Service in Miramar
Our crews work on the full Jerith residential and pool-code lineup, including the Residential Aluminum Fence in spear-top and flat-top styles, the Industrial Aluminum Fence, the Estate Series Aluminum Gate, and the Jerith Pool Code Fence. When a repair requires an exact profile match, we source genuine Jerith pickets, rails, and hinge components. For high-wear items like latch springs and post caps, we offer equivalently rated aftermarket parts that hold up just as well in Miramar’s salt air and cost less than OEM markup. We keep common Jerith hardware and fasteners on our trucks for Miramar service days, which means fewer return trips and faster turnaround on gate repairs.
Jerith Service Pricing in Miramar
Pricing depends on the scope: are we rebuilding a gate post on pre-Andrew block, running a full replacement fence line, or patching a section of damaged rail? Here are the line-item ranges for the Jerith-adjacent work we do most in Miramar:
| Service | Price Range |
|---|---|
| Aluminum Fence Installation | $4,000 - $10,000 |
| Paver Patio Installation | $3,500 - $11,000 |
| Driveway Replacement | $5,000 - $14,000 |
Every free estimate includes a site visit, a written line-by-line scope, and an honest take on whether a repair makes sense or if the fence has reached replacement age. If a Jerith fence is more than 15 years old with multiple corroded posts or widespread rail warping, we’ll recommend replacement over chasing piecemeal repairs. Call (877) 610-1318 and we’ll come out and look, no charge for the trip inside Broward County.
Serving Miramar, FL - Our Local Coverage Area
We’re based in the Miramar area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Jerith Construction in Miramar
Yes, in most of Miramar’s 33023 corridor it does. The original pre-Andrew block walls lack hurricane straps and proper embedment depth for gate posts, so Broward County permit review typically triggers a structural tie-down upgrade on the wall adjoining the fence. We handle that retrofit as part of the full scope, with written change orders before any extra work begins. Call (877) 610-1318 for a straight answer on your specific wall.
It can, but the mounting method matters. On slab-edge installations we use core-drilled post bases with epoxy-set anchors rather than wedge anchors, because Miramar’s older slabs often have corroded or bottomed-out hardware from previous fence installs. Cutting the slab is rarely necessary if the post layout aligns with the existing grade. Ask us for a free site assessment.
Wind loads flex the gate posts and shear the anchors where they meet soft mortar joints or hollow block, even when the visible hardware looks straight. That slight post shift is enough to throw the latch out of alignment. We reset the posts with grout-filled cores and stainless through-bolts so the fix holds through the next storm, not just until inspection.
Often not, especially on pool-code installations. Broward County’s HVHZ standards require deeper embedment and stronger wall connections than the original 1950s and 1960s construction provides. We upgrade the footing and tie-down detail to meet current code before rehanging any Jerith panel or gate. Call (877) 610-1318 and we’ll explain what your fence needs.
We can match the profile exactly using genuine Jerith pickets and rails, and we’ll work to match the finish as closely as current powder-coat batches allow. Five years of Miramar’s salt-humid air and UV exposure means a perfect color match isn’t always possible, but we can blend a repair section so it reads as intentional rather than mismatched. Call (877) 610-1318 for a finish assessment on your fence.
Service Areas Near Miramar
Beyond Miramar, we serve nearby communities with the same Jerith expertise and the same written-scope promise. If you’re in Miramar service area suburbs or just outside the city line, you’re likely in our coverage zone. For Jerith work farther out, we also offer Jerith service in Fort Myers and Jerith service in Cape Coral. We cover Los Angeles, San Diego, San Jose, San Francisco, Fresno, and the Paramount area.
Book Your Jerith Service in Miramar Today
Call (877) 610-1318 to schedule your free estimate. We’ll walk your fence line, check the post anchors and pool-code latch, and hand you a written scope with real numbers. We’ll do it right the first time, or we’ll come back and make it right.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Miramar since 1998.







Before
After
Before
After
Before
After