Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterJerith Construction in Santa Ana, CA | Barrett & Sons Construction
We provide independent Jerith service in Irvine and across Santa Ana, and most of what we do here starts with one fact: older Santa Ana lots carry unpermitted structures, and the city will hold your Jerith permit hostage until those get straightened out. We have been untangling that paperwork since 2008, and we fix the fence too. If you are looking for a crew that knows Jerith’s aluminum and steel lines and knows Santa Ana’s building department, call Barrett & Sons Construction at (877) 610-1318.
We are an independent Jerith service provider, not a manufacturer-authorized dealer. That matters because we have no quota to hit and no reason to push a new fence when a repair will do. Our familiarity with Jerith sales & service comes from two decades of working on the actual product line, from Estate Aluminum to Industrial Grade, across every Santa Ana ZIP code from 92701 to 92703.
Why Santa Ana Residents Choose Us for Jerith Service
Santa Ana Kitchen Remodeling is common because the city is dense, old, and heavily reworked. Homes built in the 1930s and 1940s now carry garage conversions, rear additions, and ADUs that never made it into the permit record. That layered history shapes every Jerith fence we touch. A fence post in Floral Park is not just a fence post; it is often an anchor point next to an unpermitted sunroom, and the city inspector is going to ask about it before he signs anything.
Tom Barrett has been building and remodeling across this area since the late 1990s. He grew up in the San Fernando Valley and earned his hours at Los Angeles Trade-Technical College, starting with framing. He started Barrett & Sons partly because his oldest boy showed the same interest in tools Tom had at sixteen. That is who you get when you call. A name you can verify, a crew that background-checks every person on the truck, and a written promise on every contract.
We carry genuine Jerith replacement posts, gates, and hinge hardware. When a part is out of production, we source ISO 9001-certified aftermarket components that match Jerith’s hole spacing and gauge. We do not patch powder coat and call it good. If the panel is corroded through or the gate frame is twisted, we tell you to replace the section.
Common Jerith Construction Problems We Solve in Santa Ana
- Shifting and tilting posts in French Park. The 1930s bungalows in French Park have shallow, aging concrete slabs. Jerith posts set into that concrete shift during Santa Ana wind events, and the gates pull out of alignment. We re-core the footings and re-set posts to proper depth.
- Powder-coat degradation from wind-blown grit. Santa Ana’s dry, offshore winds carry fine abrasive grit. Original powder-coat on Jerith Estate Aluminum panels scratches at panel junctions, and oxidation follows. We inspect, treat, and where needed replace the affected panels rather than hide the damage under touch-up paint.
- Gate hinge seizure on Ornamental Steel. Low humidity and zero maintenance cause Jerith Ornamental Steel gate hinges to seize. The gate sags, the latch stops catching. This is common on garage-converted lots where the fence abuts an unpermitted structure. We replace hinges and re-hang the gate square.
- Heaving post bases in clay-heavy soil. Santa Ana’s expansive, clay-heavy soils heave during winter rains. Post bases laid without adequate embedment wrack the Jerith panels and crack the bolt points. We dig deeper footings and use proper embedment for clay soil conditions.
- Permit red-tags on fences over 42 inches. Santa Ana requires a separate permit for any fence over 42 inches on a property with an unpermitted structure. We have walked dozens of homeowners through that exact red-tag. Legalize first, then re-set and sign off.
Jerith Service in Santa Ana: What Local Conditions Mean for Your Equipment
Here is the thing nobody tells you when you buy a Jerith fence in a city like this. Santa Ana’s building code requires a separate permit for any fence over 42 inches on a property with an existing unpermitted structure. City inspectors here will red-tag a new Jerith installation until that unpermitted addition is either legalized or demolished. This is not a theoretical warning. We see it on almost every older lot in 92701 and 92703. A 1930s bungalow with a 1970s garage conversion, a 1990s rear room addition, and a recent unpermitted ADU, none of it in the permit record. The fence cannot pass until the as-built is documented and the structure is brought up to code. That is why pre-construction permit research and as-built drawings are the first billable step on nearly every job we take in Santa Ana. Skip that step, and you will own a beautiful Jerith fence with a stop-work order stapled to it.
We were called to a 1940s bungalow in Floral Park after the homeowner’s new Jerith Estate Aluminum fence failed final inspection on a Santa Ana Bathroom Remodeling job site. Our crew documented a rear sunroom added in 1998 with no permit, and the inspector refused the fence permit. We pulled the as-built, filed a retroactive permit for the sunroom, then re-set the Jerith posts into fresh concrete footings at 24 inches. We re-hung the double gate with new self-closing hinges, and the fence was signed off on the second inspection. That sequence is our ordinary Tuesday in Santa Ana.
Jerith Models & Products We Service in Santa Ana
We work on every major Jerith line: Estate Aluminum Fence, Ornamental Steel Fence, Residential Aluminum, and Industrial Grade Fence. Our parts shelf is stocked for the models we see most in Santa Ana, which means gates, posts, and hinge kits for the Estate and Residential lines turn around faster than a special order. For Ornamental Steel, we keep common hinge and latch hardware on hand and match the original gauge. Older lot-line fences in central Santa Ana often predate Jerith’s current catalog. When we cannot get the exact latch assembly, we use ISO 9001-certified aftermarket components matched to the original hole spacing. If a panel is severely corroded or a gate frame is twisted beyond repair, we recommend sectional replacement, not a powder-coat patch job.
Jerith Service Pricing in Santa Ana
Every job starts with a free written estimate. You will see the line items before any work begins, and any change after that comes as a written change order. We do not surprise anyone at the end. The ranges below reflect what we typically see across Santa Ana, from French Park bungalows to east-side tract homes.
| Service | Typical Santa Ana Range |
|---|---|
| Aluminum Fence Installation | $4,000 - $10,000 |
| Vinyl Fence Installation | $3,500 - $9,000 |
| Driveway Replacement | $5,000 - $14,000 |
Soil conditions, existing footings, and whether we need to pull an as-built for an unpermitted structure on the lot all move the number. Call (877) 610-1318 for an exact quote. Estimates are free, and we will tell you honestly if a repair beats a replacement.
Serving Santa Ana, CA - Our Local Coverage Area
We’re based in the Santa Ana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Jerith Construction in Santa Ana
Yes, in most cases. If you have an unpermitted structure on the property and your new Jerith fence is over 42 inches tall, Santa Ana will not sign off on the fence permit until the unpermitted addition is legalized or demolished. We handle the as-built drawings and the retroactive permit as part of the job. Call (877) 610-1318 and we will walk you through what your specific lot needs.
Generally, yes. Jerith’s extruded aluminum panels have more flex than rigid steel, which means they absorb gust cycles without permanent deformation. What fails in Santa Ana is not usually the panel; it is the post embedment. Set the posts deep enough into proper footings and the wind is a non-issue. That is the part shortcuts get wrong.
Yes, in most cases. We match the original hole spacing and panel gauge using genuine Jerith stock where available, and ISO 9001-certified aftermarket hardware when the original part is out of production. We will tell you if a full panel replacement is the smarter money before we touch anything.
We do. We see this constantly in 92701. The ADU goes in without a permit, the fence gets shifted or twisted in the process, and the gate stops latching. We fix the hinges and the gate, and we help you sort out the permit problem with the city so the fix actually passes inspection.
You need documented as-built drawings of the existing structure, a retroactive permit for any unpermitted additions, and then the fence permit itself. There is no short version. Skip the first two and the fence permit stalls. Call (877) 610-1318 for a free consultation and we will tell you exactly what your property requires.
Service Areas Near Santa Ana
We serve all of Santa Ana service area plus nearby communities including Anaheim, Garden Grove, Orange, Tustin, and Costa Mesa. We also run crews for Jerith service in Riverside and Jerith service in Stockton. If you are anywhere in those zones, one call covers it.
Book Your Jerith Service in Santa Ana Today
Call Barrett & Sons Construction at (877) 610-1318 for a free written estimate on your Jerith fence or driveway project in Santa Ana. We will scope it in writing, pull the permits, and stand behind the work with our 90-Day Done Right Promise. We’ll do it right the first time, or we’ll come back and make it right.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Santa Ana since 2008.