Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterAmeristar Construction in Arlington, CA | Barrett & Sons Construction
We provide independent Ameristar service in Grand Prairie and across Arlington, and the work here is different because of one thing: this city’s Blackland Prairie clay moves. When your slab heaves and settles through wet springs and dry summers, every Ameristar component tied to that slab, from sill plate anchors to Wall-Tite membranes, gets stressed in ways builders in nearby engineered-fill subdivisions never see. Our crews understand that dynamic because we’ve worked on Arlington’s 1960s and 1970s ranch homes for decades. Call (877) 610-1318 for a free estimate, and we’ll come look at what your Ameristar components are actually doing under your roof.
Why Arlington Residents Choose Us for Ameristar Service
Tom Barrett grew up in the San Fernando Valley, watching crews pour foundations on Van Nuys Boulevard with his dad on weekends. He learned framing and field work at Los Angeles Trade-Technical College, and he’s been building and remodeling for the better part of two decades. What that means for you: we don’t send strangers to your door. Tom’s sons run the crews, and Tom’s name is on the truck. When we say we know Ameristar products, we mean we’ve pulled them apart on Arlington job sites, seen the failure modes up close, and learned what actually holds up on slab-on-grade ranch homes. We’re an independent service provider, not a manufacturer-affiliated outfit, so we answer to you, not to a corporate network.
We carry OEM Ameristar fasteners, flashings, and shims for quick repair turnarounds, but we’ll also tell you plainly when a quality aftermarket bracket or membrane will outlast factory spec in Arlington clay. Our Ameristar sales & service work spans the whole metro, and we’ve spent years learning which components fail first here. Every price change arrives as a written change order before work starts, and every job is backed by our 90-Day Done Right Promise. We’ll do it right the first time, or we’ll come back and make it right.
Common Ameristar Construction Problems We Solve in Arlington
- Sill plate anchors pulling loose from heaving slabs. Arlington’s expansive clay swells after spring rains and shrinks during summer drought. That seasonal cycle works Ameristar Slab-Saver anchors back and forth until they rust and lose bearing on the concrete. We see this constantly in the older 76010 through 76012 neighborhoods, where slabs predate modern soil-movement standards. The fix is resetting framing with new epoxy-set anchors, not just tightening what’s there.
- Wall-Tite membrane seams cracking at the tape joints. Ameristar’s Wall-Tite exterior membrane does a fine job until successive shrink-swell cycles start pulling at the taped seams. Once a seam cracks, moisture gets into the rim joists above the slab, and that’s when rot and insect damage follow. We replace the failed sections and re-tape with a membrane rated for expansive soil movement.
- Roof-Lock flashing losing granules before the shingle field fails. Arlington sits in a high-frequency hail corridor. Ameristar Roof-Lock flashing kits often show premature granule loss and nail-hole elongation after a major storm, even when the shingles around them look okay. We inspect the flashings around every penetration because leaks usually start there, not in the open field.
- Foundation-Set shims compressing unevenly under point loads. When soil moisture shifts, Ameristar Foundation-Set shim packs can compress at different rates. The result: out-of-level partition tops in ranch additions, doors that won’t close square, and cracks at interior corners. We check level before we do any finish work, because a shim that’s drifted means finish work gets redone in a year.
- Rusted anchors on bathroom and kitchen remodels. On a 1960s ranch off Fielder Road in 76012, our crew pulled a bathroom remodel permit and found the slab had heaved nearly an inch under the tub alcove. The original Ameristar Slab-Saver anchors were rusted and the sill plate had lifted off the concrete. We reset the framing with new epoxy-set anchors and upgraded shims before our tile team installed a walk-in shower. The inspector signed off the same week because our geotech addendum matched the existing movement.
Ameristar Service in Arlington: What Local Conditions Mean for Your Equipment
Here’s the thing about Arlington that catches people off guard: the 76010 through 76012 neighborhoods require geotechnical reports on Arlington Kitchen Remodeling and other remodel permits far more often than Mansfield or Keller. Our expansive Blackland Prairie clay shifts slabs unevenly, and city inspectors in these corridors expect to see that movement documented before they’ll sign off. That means any Ameristar construction component tied to a slab, sill anchors, Wall-Tite membranes, Foundation-Set shims, has to be checked for level before finish work begins. Builders in newer engineered-fill subdivisions can skip that step. In Arlington, we can’t, and honestly, you wouldn’t want us to. A shim pack that’s compressed a quarter inch under a load-bearing wall will crack your tile in a season. We check because the inspector checks, and because a level check is cheaper than a do-over.
Ameristar Models & Products We Service in Arlington
We service the full Ameristar line as it appears across Arlington’s housing stock: Slab-Saver sill plate anchoring systems, Wall-Tite exterior membrane series, Roof-Lock underlayment and flashing kits, and Foundation-Set leveling shim packs. Our parts approach is straightforward: we keep OEM Ameristar fasteners, flashings, and shims in stock for fast weekday turnaround, but for structural components tied to foundation movement, we default to repair with upgraded anchors rather than full replacement unless the Ameristar part itself is the root failure. That saves you money and gets the job done right the first time.
Ameristar Service Pricing in Arlington
What does Ameristar service cost in Arlington? It depends on what pulled loose, cracked, or compressed. Here’s a straight look at common job ranges:
| Service | Price Range |
|---|---|
| Bathroom Remodel | $9,000 - $28,000 |
| Small Kitchen Remodel | $9,000 - $20,000 |
| Roof Replacement | $8,000 - $20,000 |
| Countertop Installation | $2,000 - $6,500 |
| Backsplash Installation | $800 - $2,500 |
Your free estimate includes a full inspection of any Ameristar components involved, a written line-item scope, and a price that won’t move unless you approve a written change order. Call (877) 610-1318 and we’ll get you exact numbers. Estimates are free, and there’s no trip charge inside the county.
Serving Arlington, TX - Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Ameristar Construction in Arlington
Yes, most of the time. In the 76010 corridor, Arlington inspectors routinely require a geotechnical report on Arlington Bathroom Remodeling and other remodel permits when the existing slab is original 1960s or 1970s construction. The reason is simple: that slab has almost certainly moved since it was poured. Call (877) 610-1318 and we’ll tell you during the estimate whether your job needs one.
Because Mansfield’s newer subdivisions sit on engineered fill, while Arlington’s older ranch homes sit directly on Blackland Prairie expansive clay. That clay swells and shrinks through every wet-dry cycle, pulling at Wall-Tite taped seams until they crack. It’s not a product defect; it’s a soil condition. We replace and re-tape those seams with a membrane rated for movement.
That depends on what the flashing looks like up close. Roof-Lock flashing often shows granule loss and nail-hole elongation before the shingle field fails, so if the flashings are shot but the shingles are sound, we replace flashings and save you the cost of a full roof. If the whole roof took a beating, we’ll quote the full replacement. Call (877) 610-1318 for a free storm inspection.
Yes. We stock OEM Ameristar Foundation-Set shim packs and can match the original spec, but we’ll also check level first. If the slab moved an inch, we may recommend upgraded shims or additional anchoring before we call it level. The goal isn’t matching what was there; it’s making sure the addition doesn’t drop again.
Ameristar products carry their own manufacturer warranties, and as an independent service provider, we can help you document and submit warranty claims. But our 90-Day Done Right Promise covers our workmanship regardless of what the manufacturer says. One call to (877) 610-1318 brings Tom back. That’s the whole point.
Service Areas Near Arlington
Our Arlington service area covers the full 76004 through 76007 zip range, including the older 76010 to 76012 corridors where slab movement drives most Ameristar repair work. We also run crews to Ameristar service in Corpus Christi for coastal jobs and Ameristar service in Plano for homes built on the northern clay belt, where similar shrink-swell patterns show up in different neighborhoods. If you’re within a reasonable drive of Arlington, call and ask. Chances are we can get to you.
Book Your Ameristar Service in Arlington Today
If your Ameristar components are showing signs of Arlington soil movement, don’t wait for a cracked tile to tell you something’s off. Call (877) 610-1318 for a free estimate, and we’ll come out, check level, and give you a written price before any work starts. A live person answers the phone, and Tom will shake your hand when he gets there.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Arlington since 1998.