Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterOwens Corning Construction in Henderson, CA | Barrett & Sons Construction
We provide independent Owens Corning service in Las Vegas across Henderson, from Anthem to Cadence to the older streets off Basic Road. The thing that separates our work here from every other Owens Corning contractor: we know exactly how the brand’s shingles and insulation fail in Mojave heat, because we have spent 26 years fixing those specific failures in Henderson’s master-planned stucco tracts. We are not manufacturer-affiliated or authorized. We are an independent Owens Corning service provider, owner-operated by Tom Barrett, with genuine parts, desert-specific installation fixes, and written change orders on every job. Call (877) 610-1318 for a free estimate.
Why Henderson Residents Choose Us for Owens Corning Service
Tom Barrett started this company in 1998, and his sons run crews across Henderson today. When a homeowner in Seven Hills or MacDonald Ranch calls about Owens Corning Duration STORM shingles sliding out of pattern, the person who answers the phone has actually stood on a roof in that exact neighborhood and seen that exact failure. We are not a franchise dispatching strangers. We are the name-on-the-truck alternative. Our crews carry genuine Owens Corning parts for warranty work – SureNail strips, ProEdge hip and ridge pieces – but we also know when Henderson’s 160°F surface temperatures call for a desert-appropriate aftermarket underlayment the factory spec never anticipated. That judgment comes from local years, not a national training module. For more on how we approach the brand across the Las Vegas Valley, see our Owens Corning sales & service page.
Common Owens Corning Construction Problems We Solve in Henderson
Here are the failures we see most often in Henderson homes, and they are rarely the brand’s fault alone. The Mojave climate and the speed of the 2004-2007 building boom combine to punish Owens Corning products in ways you will not see in cooler, wetter markets.
- Duration STORM shingles losing adhesive bond on low-slope tile roofs. In Anthem and Seven Hills especially, we find shingles that have begun sliding out of pattern after eight to ten years. The extreme roof-deck temperatures break down the sealant strip faster than the warranty math assumes, and once one shingle slips, the whole south-facing plane starts migrating.
- EcoTouch R-38 fiberglass batts sagging in attics. In the 89052 and 89044 ZIP codes, attics routinely hit temperatures that cause the batts to collapse from the roof deck down to the ceiling plane. When that happens, the effective R-value drops well below Nevada energy code, and the upstairs runs ten or twelve degrees hotter than the thermostat says.
- FOAMULAR 250 rigid foam cracking at slab edges. Henderson’s caliche hardpan shows up everywhere, and when backfill settles against foam board laid for slab-on-grade insulation, the board cracks at the edges. Those cracks become thermal bridges, and homeowners notice them as hot spots on tile floors in the summer.
- Supreme AR shingles failing prematurely on older Basic Road housing. The WWII-era worker housing near Basic Road predates Owens Corning’s VentSure intake products, and many of those original roofs have no ridge vent at all. Supreme AR shingles on an unvented 1990s roof deck do not last, plain and simple.
- Compressed EcoTouch batts behind drywall in boom-era builds. This one is specific to Henderson’s 2004-2007 construction wave. Crews framed those homes so fast that insulation got shoved behind drywall, compressed to a fraction of its rated thickness. We have thermal-imaged hundreds of those exact floorplans and found R-38 batts reading as low as R-12 in peak summer.
Owens Corning Service in Henderson: What Local Conditions Mean for Your Equipment
Henderson is not a typical desert city, and Owens Corning products here face a specific set of pressures that do not exist twenty miles away in other parts of the metro. The 2004-2007 building boom produced thousands of rapidly constructed homes across Anthem South and the 89044 ZIP codes, framed and insulated so fast that quality control became a rounding error. Tom Barrett grew up in the San Fernando Valley watching crews pour foundations with his dad, and when he started Barrett & Sons he brought a simple rule with him: the job never lies. We have thermal-imaged hundreds of those boom-era Henderson floorplans and found Owens Corning EcoTouch R-38 batts compressed behind drywall or skipped entirely in exterior wall cavities, reading as low as R-12 on a 115°F day. No other contractor in the Las Vegas Valley can point to that specific substandard construction era as a regular service trigger. If your Henderson home was built between 2004 and 2007, your Owens Corning insulation is almost certainly underperforming its label. That is not a brand defect. That is a builder problem we know how to fix.
Owens Corning Models & Products We Service in Henderson
We work with the full Owens Corning product range relevant to Henderson’s housing stock, but these are the lines we handle most often:
- Owens Corning Duration STORM shingles – including the SureNail strip and ProEdge hip and ridge components. We see the adhesive-bond and nailing-pattern failures on Henderson’s low-slope tile roofs weekly.
- Owens Corning Supreme AR shingles – common on the older Basic Road stock and the 1990s tract homes. We pay close attention to ridge venting on those jobs, because most of those roofs never got any.
- Owens Corning EcoTouch R-38 attic insulation – the batt most frequently compressed or sagging in Henderson attics. We stock R-38 for fast replacement, and we check for the attic ventilation Owens Corning’s own specs require.
- Owens Corning FOAMULAR 250 rigid foam insulation – used under slab-on-grade foundations across Henderson. We know how caliche backfill cracks it, and we install accordingly.
When the remaining warranty or structural application calls for it, we use genuine Owens Corning parts. When Henderson’s 160°F surface temperatures demand more than factory spec, we substitute proven desert-appropriate aftermarket underlayments and ventilation. We will tell you which is which before the work starts, in writing.
Owens Corning Service Pricing in Henderson
Here are the price ranges we quote for Owens Corning work in Henderson. These are line-item ranges from our own completed jobs, not national averages pulled from a database.
| Service | Price Range |
|---|---|
| Roof Replacement | $8,000 - $20,000 |
| Roof Repair | $400 - $1,800 |
| Metal Roof Installation | $15,000 - $40,000 |
| Tile Roof Repair | $600 - $2,500 |
What drives the cost: the size of the roof plane, the slope, whether we are tearing off to the deck or overlaying, the condition of the caliche-cracked edge flashing, and whether you need new ventilation to meet Henderson’s energy code. We also handle Kitchen Remodeling - Henderson homeowners trust for quality work. A free estimate includes the scope in writing, the allowance in writing, and a line-item breakdown you can check against any other bid. Call (877) 610-1318 for an exact quote on your Henderson home.
Serving Henderson, NV - Our Local Coverage Area
We’re based in the Henderson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Owens Corning Construction in Henderson
The short answer is Mojave heat. Henderson roofs routinely see surface temperatures that exceed the adhesive bond strength of the sealant strip after eight to ten years, especially on low-slope tile roofs in Anthem and Seven Hills. The 20-year warranty assumes a temperature profile that Henderson simply does not have. We repair the sliding shingles with genuine SureNail strips where the roof still has remaining life, and we recommend full cool-roof replacement on anything older than 12 years with multiple blown seams. Call (877) 610-1318 and we will tell you honestly which camp your roof is in.
Quite possibly yes, but not because of the brand. Homes built during Henderson’s 2004-2007 boom were framed so fast that crews compressed EcoTouch batts behind drywall or skipped the required attic ventilation. We have thermal-imaged hundreds of those exact Anthem South and 89044 floorplans and found R-38 batts reading as low as R-12 in peak summer. The fix is pulling the drywall or adding blown-in over compressed batts, plus correcting the ventilation. Call (877) 610-1318 for a thermal inspection and a written quote.
Yes. Henderson maintains its own permitting department, separate from Clark County, and foam board under a slab is part of the structural and thermal scope that gets reviewed. We pull the permit on every eligible job, and the inspector signs it before we pour. The permit inspector works for you, not for me – and that is exactly why we like him involved.
We can document the failure, provide the installation history if we did the original work, and walk you through the claim process with the manufacturer. What we cannot do is act as an Owens Corning authorized warranty agent, because we are an independent service provider, not manufacturer-affiliated. We will give you the photos, the measurements, and the written findings you need to pursue your claim directly. Call (877) 610-1318 for a failure inspection.
Honestly, probably not. A 1990s roof on an unvented deck in Henderson has typically outlived its realistic remaining life, and patching blown seams one at a time is money that would be better spent on a full cool-roof replacement with proper VentSure intake. We never patch a failed Owens Corning roof past its realistic remaining life. We will tell you the truth, in writing, and you decide. Call (877) 610-1318 for an honest assessment.
Service Areas Near Henderson
We serve all of Henderson, including the 89074, 89077, 89002, and 89009 ZIP codes, plus the surrounding Las Vegas Valley. Henderson service area details are on our main city page. We also provide Owens Corning service in North Las Vegas and Owens Corning service in Reno for clients with properties in both metro areas.
Book Your Owens Corning Service in Henderson Today
We had a roof replacement in the Seven Hills community off Seven Hills Drive that was losing Owens Corning Duration STORM shingles along the south-facing slope. Our crew found the original installer nailed through the SureNail strip in the wrong pattern, and 14 years of Mojave heat peeled the sealant. We tore off to the deck, repaired the caliche-cracked edge flashing, and installed a new cool-roof Owens Corning system with proper VentSure intake. We also offer Bathroom Remodeling in Henderson with the same attention to detail. The homeowner’s attic temperature dropped 38 degrees on the first 115°F day. We’ll do it right the first time, or we’ll come back and make it right. Call (877) 610-1318 to schedule your free estimate.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Henderson since 1998.