Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterSilestone Construction in Fort Myers, CA | Barrett & Sons Construction
We install, repair, and replace Silestone quartz countertops across Fort Myers, from the older CBS ranch neighborhoods along McGregor Boulevard to the newer communities out in Gateway. The one thing that makes our Silestone work here different: we’ve been cutting, seaming, and templating this material on post-Hurricane-Ian rebuilds since the flood maps changed, so we know where it fails and why. We’re an independent contractor, not factory-authorized, but we’ve handled Silestone on hundreds of Fort Myers kitchens and baths. Call (877) 610-1318 for a free estimate on your Silestone project.
Why Fort Myers Residents Choose Us for Silestone Service
Tom Barrett started this company in 1998, and he’s been on job sites in Lee County long enough to watch two things happen after Ian: foundations shifted, and countertop seams started telling the truth about it. That matters for Silestone because this quartz doesn’t flex. When a slab gets stressed, it cracks or the seam opens, and the homeowner usually finds it months after the drywall crew has gone home. We know Silestone sales & service from the templating end through final polish, which means we spot the cabinet shim problem before the new slab goes down.
Our crew templated an Eternal Calacatta Gold kitchen island last month in a 1978 CBS ranch off McGregor Boulevard in 33901, where post-Ian slab jacking had left the corner near the sink 3/8 inch low. The original Silestone slab had a hairline crack radiating from the dish sink cutout, caused by that same slab movement. We re-leveled the island cabinetry with steel shims and poured self-leveling underlayment before resetting a new slab with a tension-free seam line away from the stress point. That’s the difference between a countertop that lasts fifteen years and one that cracks again in two.
Common Silestone Construction Problems We Solve in Fort Myers
- Stress cracks from sink cutouts. We see these within two to three years on post-Ian remodels where cabinets were shimmed unevenly on new elevated slab foundations. The crack runs from the corner of the undermount sink outward, and patchwork won’t stop it if the cabinet below is still moving.
- Seam separation along island overhangs. A gap wider than 1/16 inch at the island seam usually means the supporting framing never got re-leveled after the 2022 storm shifted the foundation. Fresh adhesive alone won’t hold if the structure underneath is still drifting.
- UV-induced color fading. Silestone colors like Pulsar can visibly lighten within five years when the slab sits near new impact windows without low-E coatings. The Fort Myers sun is relentless, and quartz pigments are not immune to it.
- Thermal shock cracking at the stove-side edge. Prolonged afternoon heat on the counter, followed by a cold pan set directly on the edge during a summer thunderstorm, stresses the resin binder. We see this on wet-season installs where the slab runs tight against a range.
- Yellowed seam fillers from humidity. Aftermarket quartz epoxies yellow within a year under Fort Myers’s 75%+ humidity. We use genuine Silestone resin-matched adhesives and color-coded seam fillers for every repair we do.
Silestone Service in Fort Myers: What Local Conditions Mean for Your Equipment
Here’s something you won’t read on a national quartz site. In Fort Myers’s 33908 ZIP, thousands of homes that sat in FEMA Zone X before Hurricane Ian got reclassified to Zone AE afterward. What that means for a Silestone countertop job: even a straightforward replacement inside an elevated rebuild triggers an elevation certificate review before we can pull the remodel permit. No neighboring city in Lee County applies that step at anywhere near the same scale. Cape Coral had its own Ian damage, sure, but the flood-zone reclassification wave hit south Fort Myers and Iona hardest. If you live in 33908 and you’re replacing countertops as part of a substantial improvement, we have to confirm the finished floor elevation meets base flood elevation plus freeboard before the first slab gets cut. It’s paperwork, but it’s paperwork that keeps your insurance valid and your resale value intact.
Silestone Models & Products We Service in Fort Myers
We template, cut, seam, and install the full Silestone line, including Eternal Calacatta Gold, Pulsar, Platinum Grey, and White Zeus Extreme. For repairs, we stock genuine Silestone color-matched seam fillers and resin adhesives for the most common Fort Myers colors. We don’t push aftermarket patch kits, because they yellow under this humidity. And we’ll tell you straight: if a slab has multiple structural cracks running through it from slab movement, replacement often costs less than repeated patchwork. We’d rather tell you that before you spend money on a repair that won’t last.
Silestone Service Pricing in Fort Myers
What you’ll pay depends on slab size, edge profile, seam count, and whether we’re working in an existing cabinet footprint or a full remodel with new island framing. Below are the ranges we quote most often for Fort Myers Kitchen Remodeling projects.
| Service | Typical Range |
|---|---|
| Countertop Installation | $2,000-$6,500 |
| Kitchen Island Installation | $3,000-$10,000 |
| Cabinet Installation & Refacing | $4,000-$13,000 |
| Backsplash Installation | $800-$2,500 |
Every estimate we give is a written, line-item quote. No allowances hiding off-paper, no change orders that show up after the slab is cut. Tom’s rule: scope in writing, allowances in writing, change orders in writing. Call (877) 610-1318 and we’ll walk your kitchen, take measurements, and get you a number that won’t move unless you change the scope.
Serving Fort Myers, FL - Our Local Coverage Area
We’re based in the Fort Myers area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Silestone Construction in Fort Myers
Yes, in many cases it does. If your property sits in a Zone AE area, Lee County requires an elevation certificate review before we can pull a remodel permit for substantial improvements, and that includes countertop replacement tied to a larger rebuild. We handle that paperwork as part of the job. Call (877) 610-1318 and we’ll check your address before we even schedule the template.
Yes, and the reason is foundation movement, not the quartz itself. Post-Ian slab shifting and new elevated foundation work both create uneven cabinet surfaces, and Silestone doesn’t flex the way laminate does. Stress cracks at sink cutouts and seam separation at island overhangs are the two most common failures we repair in Fort Myers. A proper re-leveling before installation prevents most of it.
Intense UV exposure through impact windows without low-E coatings accelerates pigment fading in certain Silestone colors, particularly Pulsar and some lighter neutral tones. The Fort Myers sun compresses that timeline compared to inland markets. If you’re doing an impact window upgrade and a countertop replacement in the same season, ask about low-E glass or consider UV-stable Silestone models. Call (877) 610-1318 for a consultation.
Sometimes, but only if the cabinet below is stable. We start by checking whether the crack is structural (foundation or cabinet movement) or surface-level. A hairline from a dropped pan can be resin-filled and refinished. A crack running through the sink cutout with a soft cabinet corner underneath is structural, and patchwork will fail. In those cases replacement costs less than repeated repairs. Call (877) 610-1318 and we’ll inspect it in person.
Countertop installation alone typically runs $2,000 to $6,500 in Fort Myers, depending on square footage, slab count, edge detail, and seam placement. If we’re also installing a new island, that adds $3,000 to $10,000. A full kitchen remodel with Silestone countertops, new cabinetry, and backsplash usually lands between $16,500 and $53,100. For an exact quote, call (877) 610-1318; estimates are free and written line by line.
Service Areas Near Fort Myers
We run Silestone installations and repairs throughout Lee County and down the coast. If you’re in Fort Myers service area, call us first. We also serve Silestone service in Cape Coral across the bridge, and Silestone service in Naples for customers in Collier County. Our crews cover ZIPs 33919, 33965, 33966, and 33967 plus surrounding communities.
Book Your Silestone Service in Fort Myers Today
We’ll do it right the first time, or we’ll come back and make it right. That’s been Tom Barrett’s rule since 1998, and it’s written on every contract. Call (877) 610-1318 for a free estimate on your Silestone countertop project, or to schedule a service visit. We’ll answer the phone.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Fort Myers since 1998.