Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterCambria Construction in Fort Lauderdale, CA | Barrett & Sons Construction
If you need a Cambria countertop repaired, replaced, or installed in Fort Lauderdale, here’s the short answer: we’re an independent Cambria service provider, not a manufacturer shop, and we’ve handled hundreds of quartz jobs across this city’s canal-front and concrete-block homes. What makes our Cambria work different here is that we treat your countertop as part of the structure, not just a surface. Fort Lauderdale’s High-Velocity Hurricane Zone code, salt air, and aging block walls put stress on quartz that installers in neighboring cities never see. Call (877) 610-1318 for a straight answer and a free estimate.
Why Fort Lauderdale Residents Choose Us for Cambria Service
Tom Barrett started Barrett & Sons Construction in 1998, and we’ve been working on Fort Lauderdale homes long enough to know which ones have strapping and which ones don’t. That matters when a Cambria seam separates or a slab cracks. We don’t blame the quartz. We look at what the house did to it.
We’re an independent Cambria service provider. That means we buy genuine Cambria slabs through authorized distributors, but we don’t answer to a corporate office in Minnesota. We answer to you, and we answer to the Broward County inspector who signs off on the permit. Tom’s name, address, and license number are published, and his sons run the crews. That’s the whole structure.
Our Cambria sales & service work across Fort Lauderdale includes everything from full kitchen remodels to a single seam rework. And when you call, a live person picks up. Not a call center.
Common Cambria Construction Problems We Solve in Fort Lauderdale
- Dark Cambria slabs like Skara Brae cracking near cooktops. We see this most often in lanai-adjacent kitchens where the indoor space opens to unconditioned outdoor air. The rapid temperature swing between a cold air-conditioned room and a hot lanai puts thermal stress right at the thinnest point of the slab, the cooktop cutout. By the time we arrive, the fracture has usually run three to six inches from the corner.
- Seam separation and lippage at butt joints over concrete-block walls. Finger-island homes built before modern hurricane strapping flex during wind loading. The block walls move just enough to open a seam or create a ridge you can feel with your thumbnail. We re-level the substrate first, then rework the seam with Cambria-certified color-match adhesive, not generic epoxy.
- Chipping at overhang edges on canal-front properties. Salt-corroded cabinet hardware and storm-shutter installation tools take bites out of quartz edges. A chip at the overhang is often repairable if we catch it before moisture gets into the substrate. After that, it’s usually a replacement panel.
- Staining and etching around undermount sink flanges. Fort Lauderdale’s municipal water runs slightly acidic with a fair amount of mineral content. If the caulk joint around an undermount sink wasn’t re-sealed after the house settled, water wicks under the flange and leaves a ring that won’t come out with cleaner. We remove the sink, clean the surface, and reset it with a proper silicone bed.
- Outdoor kitchen slabs that weren’t anchored for uplift. On canal-front lots in Coral Ridge, we’ve pulled outdoor countertops that were set with nothing but construction adhesive. That’s a dead-load installation in a 170+ mph uplift zone. The slab didn’t fail, but the code did. We reinstall with stainless steel mechanical brackets and get the permit finaled.
Cambria Service in Fort Lauderdale: What Local Conditions Mean for Your Equipment
Here’s the part most pages won’t tell you. In Fort Lauderdale’s Coral Ridge and finger-island neighborhoods, Broward County requires all outdoor countertop overhangs to be anchored for 170+ mph uplift, not just for the weight of the slab sitting there. That means a Cambria outdoor kitchen counter has to be mechanically fastened to resist being lifted off the base by wind, not just supported against gravity. Our Cambria installs in Fort Lauderdale include stainless steel L-brackets and mechanical anchors that are not required in neighboring Pompano Beach, where the wind-load terrain classification is lower. If you bought a house with an outdoor kitchen and the counters were installed by someone who treated Fort Lauderdale like any other city, the overhang is likely under-engineered. We check that on every outdoor Cambria job, and we show you the bracket placement before the slab goes back on.
We replaced a cracked Cambria Torquay island top on Nurmi Drive in Coral Ridge after the original installer failed to account for deflection in the concrete-block base under wind-load. The crack ran two inches from the sink corner and was widening. We removed the top, installed steel L-brackets into the block wall, re-leveled the island, and set a new Torquay slab with a flex-rated epoxy seam. The inspector signed off the same week.
Cambria Models & Products We Service in Fort Lauderdale
We install and repair the full Cambria line. The models we see most in Fort Lauderdale kitchens are Brittanicca, Torquay, Summerhill, and Skara Brae. Brittanicca’s wide veining makes seam placement critical, and Torquay’s pale background shows every chip, so edge detailing matters. Summerhill and Skara Brae are darker, and that’s where thermal-shock fractures show up fastest.
On the parts side, we use only genuine Cambria quartz slabs sourced through authorized distributors. We don’t mix aftermarket quartz into a Cambria repair, because a color mismatch is worse than a crack. For minor chips and seam rework, we use Cambria-certified color-match adhesives from the original fabricator kit. For structural failures, we replace the panel. We’d rather tell you the honest cost of a replacement than sell you a patch that fails in a year.
Cambria Service Pricing in Fort Lauderdale
| Service | Price Range |
|---|---|
| Quartz Countertop Installation (Cambria) | $2,000 - $6,500 |
| Kitchen Island Installation (with Cambria top) | $3,000 - $10,000 |
| Cabinet Installation & Refacing | $4,000 - $13,000 |
| Kitchen Remodel (including Cambria) | $14,000 - $45,000 |
| Bathroom Vanity Installation (with Cambria top) | $800 - $3,000 |
| Backsplash Installation | $800 - $2,500 |
What drives the cost in Fort Lauderdale is usually the substrate, not the slab. If we have to re-level a concrete-block base, add mechanical anchors, or pull a permit for an outdoor overhang, that’s on the written estimate before we start. Every scope change is a written change order. The allowance that isn’t on paper is a surprise waiting for a date. Call (877) 610-1318 and we’ll put a firm number in front of you.
Key Takeaways
- We’re an independent Cambria service provider in Fort Lauderdale, not manufacturer-affiliated or authorized.
- Every Cambria install and structural repair in Fort Lauderdale gets checked against HVHZ uplift and wind-load requirements.
- We use only genuine Cambria slabs and Cambria-certified adhesives, sourced through authorized distributors.
- Seam failures and cracks in concrete-block homes are usually a substrate problem, not a quartz problem, and we fix the cause before the surface.
- Written change orders, permits pulled, and a 90-Day Done Right Promise on every job.
Serving Fort Lauderdale, FL - Our Local Coverage Area
We’re based in the Fort Lauderdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Cambria Construction in Fort Lauderdale
Yes, Cambria quartz can be used outdoors in Fort Lauderdale, but the installation has to meet Broward County’s High-Velocity Hurricane Zone requirements, which means anchoring the countertop for 170+ mph uplift resistance, not just supporting its dead weight. On Fort Lauderdale canal-front homes, we install stainless steel mechanical brackets into the block or frame structure and get the permit signed before the counter is finaled. Call (877) 610-1318 if you have an outdoor kitchen that was never permitted, and we’ll tell you what it needs.
Dark Cambria designs like Skara Brae absorb heat, and the thinnest point of any slab is the cooktop cutout. When a Fort Lauderdale kitchen opens directly to an unconditioned lanai, or when bathroom remodeling in Fort Lauderdale creates similar humidity shifts, the slab cycles between cold air-conditioned air and hot, humid outdoor air. That thermal cycling stresses the quartz at the cutout corners. The fix is usually a replacement panel with a properly relieved cutout and an expansion-compatible setting bed. Call (877) 610-1318 for an exact quote, estimates are free.
We re-level the substrate first. In a concrete-block Fort Lauderdale house, the wall or cabinet base has usually flexed, and that movement opened the seam. Once the base is stable, we rework the joint with Cambria-certified color-match adhesive and set the slabs on a flex-rated setting material. Patching the seam without fixing the movement is how you end up with the same crack next hurricane season.
Cambria’s limited warranty covers the material itself for manufacturing defects. Installation workmanship is covered by the installer, which is why our 90-Day Done Right Promise is written on every contract. We’re not authorized by Cambria, and we don’t claim to be. We buy genuine slabs through authorized distributors and stand behind our own labor. If something is not done right, Tom Barrett comes back and makes it right. One call.
Quartz is non-porous and doesn’t corrode the way metal does, so the countertop surface won’t pit from salt air. What salt air does attack is the hardware around it: cabinet hinges, brackets, and fasteners. We’ve seen chipped overhang edges where salt-corroded hardware failed and tools slipped during storm-shutter installation. On canal-front homes in Fort Lauderdale, we spec stainless steel fasteners and mechanical anchors for anything touching the counter. Call (877) 610-1318 to schedule a look at yours.
Service Areas Near Fort Lauderdale
We run Cambria service throughout Fort Lauderdale, including the ZIP codes 33307, 33308, 33309, and 33310, and into the surrounding county. Our crews also serve Fort Lauderdale service area neighbors to the north and south. If you’re in West Palm Beach, visit our Cambria service in West Palm Beach page. For Hialeah homeowners, see Cambria service in Hialeah.
Book Your Cambria Service in Fort Lauderdale Today
If your Cambria countertop has a crack, a separated seam, or an edge chip, call us before it gets worse. We’ll come out, look at the substrate, and tell you what the repair actually needs. Free estimates, written change orders, and Tom Barrett’s name on the contract. Call (877) 610-1318.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Fort Lauderdale since 1998.