Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterKraftMaid Construction in Frisco, CA | Barrett & Sons Construction
We’re Barrett & Sons Construction, an independent KraftMaid service provider working across Frisco, TX since long before the current building boom. We install, reface, and repair KraftMaid cabinetry in everything from early-2000s slab homes to brand-new master-planned builds. What makes our KraftMaid work different here is simple: we know how Blackland Prairie clay movement pulls cabinet boxes out of square, and we plan for it before we touch a hinge. Call (877) 610-1318 for a free estimate on any KraftMaid job in Frisco.
Why Frisco Residents Choose Us for KraftMaid Service
Tom Barrett started this company in 1998 with his name on the truck, and his sons run crews today. We’ve watched Frisco grow from a small town into one of the fastest-growing cities in America, and we’ve been inside hundreds of kitchens across that timeline. When you call us about Plano Kraftmaid service or Frisco cabinets, you’re talking to people who know the difference between a Vantage hinge from 2004 and a Passport glide from 2019. That matters in Frisco, where the housing stock spans twenty-plus years of production builder work and KaZillions of cabinet boxes sitting on slabs that move with every wet spring and dry summer. We’re not a manufacturer-authorized service center and we won’t pretend to be. We’re better positioned than that: independent, honest about what KraftMaid gets right, and blunt about where it fails under North Texas conditions. Tom’s oldest boy runs most of our kitchen work now. That’s the kind of continuity national outfits can’t fake.
Common KraftMaid Construction Problems We Solve in Frisco
- Racked cabinet boxes from slab movement. Frisco sits on expansive montmorillonite clay. Wet springs heave the soil; triple-digit summer droughts shrink it back. That repeated cycle tilts slab-on-grade foundations just enough to pull cabinet boxes out of square. Drawers bind, doors won’t close flush, soft-close hinges stop engaging. We reset and re-shim KraftMaid boxes to dead level, then swap the stressed hardware rather than telling you to live with it.
- Door and drawer face delamination in humid kitchens. Homes without supplemental ventilation trap moisture from cooking and dishwashers. We regularly see early-2000s Vantage and Passport doors where the veneer or thermofoil face has started peeling at the edges. Frisco’s humidity swings make it worse. We can reface individual doors or a full run, depending on how far it’s spread.
- Soft-close hinge and glide failures on older cabinets. Racked boxes chew through OEM hinges and drawer slides. A hinge designed for a square box fights a cabinet that’s 3/16″ out of level, and it loses. We replace failed hardware with heavier-duty aftermarket units that hold up better under slab movement than the original spec.
- Finish yellowing and topcoat wear on south- and west-facing kitchens. Frisco gets brutal summer sun. Maple and cherry KraftMaid finishes near unshaded windows fade, yellow, or develop micro-cracks in the clear coat within ten to fifteen years. We refinish doors and face frames when the cabinet boxes are still sound, and we’ll tell you honestly when they aren’t.
- Melamine shelf sag on wide pantry cabinets in Momentum installs. Momentum is a good cabinet for the money, but those wide pantry shelves bow under heavy cookware and small-appliance loads. We reinforce with solid-wood shelf supports or replace with plywood-core shelves that carry real weight without sagging.
KraftMaid Service in Frisco: What Local Conditions Mean for Your Equipment
Here’s something every Frisco homeowner should know before they call anyone for a foundation-related cabinet repair: Frisco’s Building Inspections department requires a third-party structural engineer’s letter before approving any foundation or structural work. When slab movement has racked KraftMaid cabinets out of square, our crew can’t just come in, pull the boxes, shim them, and walk away. We coordinate the cabinet reset and re-shimming with an approved engineer’s scope, which adds days to what would otherwise be a one-day job in a neighboring city. This requirement simply doesn’t exist in most Collin County municipalities, and contractors who handle Kitchen Remodeling - Frisco without local permit experience get flagged on their first job here. We’ve been through this process enough times that we schedule for it upfront, so you’re not standing in a torn-apart kitchen wondering why the permit office hasn’t signed off. We recently reset and re-shimmed a full KraftMaid Vantage kitchen in a home off Teel Parkway in Stonebriar. The clay under that slab had heaved over two wet springs, pushing the island base cabinets 3/16″ out of level. Every soft-close drawer on the left bank bound. We pulled the island, shimmed the base to dead level, replaced two stripped hinge plates with heavier aftermarket units, and sent a level-check report to the HOA architectural committee so the homeowner had no delay on their next exterior project. That’s the kind of coordination Frisco demands.
KraftMaid Models & Products We Service in Frisco
We work on all four major KraftMaid lines: Vantage, Passport, Momentum, and Venecia. Vantage and Passport show up most often in Frisco’s early-2000s production homes; Momentum is the current workhorse in newer builds and big-box orders; Venecia shows up in higher-end remodels where homeowners wanted a step up from builder grade. For repairs, we source genuine KraftMaid replacement hinges, glides, and shelf pins when color and profile matching matters. But when slab movement keeps eating OEM hardware, we don’t hesitate to use high-quality aftermarket soft-close hinges and heavy-duty drawer slides that outlast the originals under Frisco conditions. We carry common hardware sizes and shims in our local stock, which cuts turnaround time on most cabinet repairs and refacing jobs. When a box is too racked or the finish is failing across multiple doors, we’ll tell you that a targeted reface or full KraftMaid sales & service remodel costs less per year of service than patching individual failures forever.
KraftMaid Service Pricing in Frisco
Here’s what to expect on a written estimate for KraftMaid work in Frisco:
| Service | Price Range |
|---|---|
| Cabinet Installation | $4,000-$13,000 |
| Kitchen Island Installation | $3,000-$10,000 |
| Full Kitchen Remodeling | $14,000-$45,000 |
| Countertop Installation | $2,000-$6,500 |
| Backsplash Installation | $800-$2,500 |
Cost depends on how many boxes need work, whether we’re installing new KraftMaid cabinetry or refacing existing boxes, and how much slab movement has affected the job. Every estimate is free, written, and itemized. Every change order arrives in writing before work starts. No surprises at the end. Call (877) 610-1318 to schedule yours.
Serving Frisco, TX - Our Local Coverage Area
We’re based in the Frisco area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - KraftMaid Construction in Frisco
Yes, in most cases. We pull the affected boxes, shim the bases back to level, and reset the cabinets. If the foundation movement is significant, Frisco requires a third-party engineering letter before structural work can proceed, and we coordinate that with the city. Call (877) 610-1318 for a free estimate.
We do both. Refacing is often the right answer when the boxes are sound but the doors, drawer faces, or finish are failing. Frisco’s humidity and sun can wreck faces long before the boxes give out. We’ll give you an honest price for each option and tell you which one makes sense for your Bathroom Remodeling in Frisco or kitchen project.
We sand, re-stain or re-topcoat, and refinish the affected doors and face frames when the cabinets are structurally solid. If fading and clear-coat failure have spread across most of the kitchen, refacing may cost less than refinishing. Either way, the estimate is free and we’ll show you the numbers side by side.
Yes. We install KraftMaid cabinetry from any source. What we won’t do is pretend the big-box order didn’t happen when something goes wrong. If a hinge strips or a glide fails, we fix it. We’re independent, which means we answer to you, not to KraftMaid corporate or a retailer’s service line.
Usually, yes. An island install runs $3,000 to $10,000 depending on size, countertop material, and electrical work. If the island needs new circuits or plumbing, we pull the permit and the inspection happens before you use it. Call (877) 610-1318 and we’ll tell you what your specific kitchen will take.
Service Areas Near Frisco
We serve Frisco and the surrounding communities, including McKinney, Plano, Allen, Little Elm, and The Colony. For cabinet work in McKinney, see our KraftMaid service in McKinney page. We also cover the broader Frisco service area and run KraftMaid jobs in KraftMaid service in Amarillo for clients with properties out that way.
Book Your KraftMaid Service in Frisco Today
Free estimates. Written change orders. Permits pulled and inspections signed. The 90-Day Done Right Promise on every job. Call (877) 610-1318 and a live person answers. We’ll do it right the first time, or we’ll come back and make it right.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Frisco since 1998.