KraftMaid Construction in Arlington, TX

KraftMaid Construction in Arlington, CA | Barrett & Sons Construction

We provide independent KraftMaid cabinet installation, refacing, and Kraftmaid repair in Grand Prairie and across Arlington. The one thing that makes our KraftMaid work here different: Arlington’s blackland prairie clay shifts slabs seasonally, and cabinets installed without accounting for that movement will bind, twist, or pull apart within a few summers. Tom Barrett has been fixing those exact problems since 1998. Call us at (877) 610-1318 for a free estimate on any KraftMaid kitchen or bath project in Arlington.

Call (877) 610-1318

Why Arlington Residents Choose Us for KraftMaid Service

We’ve built and serviced hundreds of KraftMaid kitchens and baths through Kitchen Remodeling - Arlington projects across Arlington’s slab-on-grade ranch homes. That matters because most of those homes sit on expansive clay that swells in spring and cracks in August. Cabinets that were square on install day loosen up two years later when the slab settles another quarter inch. We know to look for that before we hang a single box.

Tom Barrett grew up in the San Fernando Valley and learned framing at Los Angeles Trade-Technical College. He’s been building and remodeling for over 29 years, and his sons run most crews now. This is not a franchise dispatching strangers. When someone shows up at your Arlington door for Bathroom Remodeling in Arlington or kitchen work, they carry the Barrett name and they’re expected to treat your home like Tom would treat his own. We’re an independent KraftMaid service provider, which means we answer to you and the permit inspector, not to a manufacturer’s warranty department.

We stock common KraftMaid hinge plates, drawer glides, and door bumpers for fast turnarounds in Arlington. That’s part of our KraftMaid sales & service work, and it’s why a warped drawer box doesn’t sit in your kitchen for three weeks while someone orders parts from Ohio.

Common KraftMaid Construction Problems We Solve in Arlington

• Face-frame separation at drawer glide mounting points. Arlington’s clay soil heaves and contracts with the seasons. In older 76010-76012 homes with uneven floors, that movement transfers up through the base cabinets. The face frame pulls away from the box at the glide screws, and suddenly the drawer drops an eighth of an inch. We re-secure the frame, add corner blocking, and shim the run so the stress stops twisting the cabinet.
• Warped or binding drawer boxes in KraftMaid Vantage. Arlington’s poorly ventilated 1960s-1980s ranches trap attic heat directly above the kitchen. Over time, that heat dries drawer boxes and they cup or bind. We see this constantly in KraftMaid Vantage kitchens. Sometimes the fix is a new drawer box; sometimes a heat shield above the cabinet run is the only way to keep it from happening again.
• Hinge plate screws loosening on out-of-plumb walls. When a settled slab leaves your wall a half-inch out of plumb, cabinet installers who just slam the boxes up transfer that stress to the hinge plates. Doors sag, they stop self-closing, and the customer thinks the hardware failed. It didn’t. The wall moved. We shim behind the cabinet, reset the hinge geometry, and the doors ghost-close again.
• Thermofoil delamination on door and drawer fronts. Arlington kitchens cycle between damp spring air and dry summer heat. We see thermofoil peeling most often in the older central neighborhoods where kitchens get direct afternoon sun through single-pane windows. Once the foil lifts, refinishing returns are poor. We counsel replacement door fronts when the delamination is widespread.
• Drawer glide failure after slab heave. A drawer that slid fine for years starts grinding after a wet spring. The slab under the cabinet run has moved, racking the box and putting side-load on the glides. If we catch the movement early, we can shim the run level and save the glides. If the glide’s already chewed, we replace with OEM KraftMaid parts or a quality aftermarket equivalent.

KraftMaid Service in Arlington: What Local Conditions Mean for Your Equipment

Here’s the thing about Arlington that a contractor from Mansfield or Keller might not know. In many neighborhoods built before 1985, pulling a remodel permit for moving or adding KraftMaid cabinets on an exterior wall means Arlington’s building department wants a geotechnical report attached. That’s not a barrier. It’s the city doing what it should, because the blackland prairie clay under zip codes 76010, 76011, and 76012 routinely shifts slabs an inch or more unevenly. New cabinet runs that span that movement will rack, twist, and bind within a season or two. We’ve pulled enough permits in Arlington to know exactly when that geotech requirement applies, and we plan for it before we order the first cabinet. That’s the difference between a KraftMaid kitchen that stays square for thirty years and one that starts popping drawer fronts by its third August.

KraftMaid Models & Products We Service in Arlington

We work on the full KraftMaid line you’re likely to find in Arlington kitchens: Vantage, Venicia, Kemper Choice, and the Passport Series. For hardware, we use genuine KraftMaid replacement hinges, glides, and bumpers whenever a part is still in production. When a line’s been discontinued for a decade, we’ll recommend a quality aftermarket component that matches the original spec, and we’ll tell you exactly why we chose it. We keep the most common Arlington-failure parts in stock: glides, hinge plates, corner blocks, and soft-close mechanisms. It means a drooping door or a stuck drawer gets fixed in one visit more often than not.

On one KraftMaid Vantage kitchen remodel off Fielder Road in 76012, our tech found the existing slab had dropped 7/8 of an inch from back wall to island location. The new island cabinets rocked, and the drawer fronts bound. We pulled the bases, added custom steel shims and a recessed ledger, then re-leveled the island to dead-on plumb before resetting the countertop. The drawers now ghost-close with two fingers.

KraftMaid Service Pricing in Arlington

FAQs - KraftMaid Construction in Arlington

Why does my KraftMaid Vantage drawer stick in summer but slide fine in winter in my Arlington 76010 home?
Your slab is moving. Arlington’s clay soil swells after spring rains and shrinks during the summer drought, and your house rides that movement. The cabinet run racking slightly out of square is enough to make a drawer bind against its opening. We level the run with shims and re-align the glides, which usually restores the smooth slide. Call (877) 610-1318 if the sticking is new. A drawer that just started binding is usually a cheaper fix than one that’s been grinding for a year.

Can you match a discontinued KraftMaid door style if only two doors are warped on my 1980s Arlington kitchen?
Sometimes, but we’ll tell you honestly when we can’t. If the door style and wood species are still available through a millwork shop, we can have doors made to match the profile. If the line’s been dead for twenty years, we’ll recommend replacing the full set of front-facing doors and drawer fronts so the kitchen doesn’t look pieced together. Either way, you’ll see the numbers before you decide.

I added an island in my Arlington house, and now my KraftMaid drawers won’t close flush. Is that a product defect?
Usually not. In Arlington, it’s almost always slab movement. The original cabinets went in level, the slab settled under the new island’s concentrated weight, and now the island runs a couple degrees out of square. That tilt makes drawer fronts look crooked and self-close mechanisms feel sluggish. We pull the base, shim it to dead level, and reset the countertop. The drawers settle right back into their track.

Does Arlington’s hail climate affect KraftMaid cabinet warranties if I have a leaking skylight over the kitchen?
Water from a hail-damaged skylight is a roof failure, not a cabinet failure. KraftMaid’s warranty won’t cover a door front that swelled because water got into the box. But here’s what we do: we fix the skylight, and we also check the cabinet’s structural integrity before we tell you whether to replace the damaged pieces. If the box is sound, you might just need new doors. Get the roof fixed first, then call (877) 610-1318 and we’ll assess the cabinet damage.

Can you install KraftMaid Venicia cabinets in my Arlington garage conversion if the slab has an inch of differential settlement?
Yes, but not without correction. An inch of differential settlement will make a Venicia run impossible to keep square. We’d bring in a geotech report, verify where the slab is moving, and then either level the cabinet runs with steel shims and ledgers or address the slab issue first, depending on what the report says. We’ve done this in several 76011 garage conversions. It adds cost, but it keeps the doors from binding by year two. Call (877) 610-1318 for an exact quote.

Service Areas Near Arlington

Most of our KraftMaid work happens right here in Arlington, but we also serve the surrounding corners of the Metroplex for larger kitchen and bath projects. If you’re just outside Arlington, we cover the nearby ZIP codes and communities that share the same blackland prairie soil and the same 1960s-1980s slab foundations. That includes the Arlington service area and stretches toward Fort Worth and Grand Prairie. For a comparable service page, see KraftMaid service in Corpus Christi and KraftMaid service in Plano. If you’re not sure we cover your street, call and ask.

Book Your KraftMaid Service in Arlington Today

Tom Barrett’s name, address, and license number are on every quote we write. Look them up before you sign anything. Every price change comes to you in writing before work proceeds, and every job is backed by our 90-Day Done Right Promise. We’ll do it right the first time, or we’ll come back and make it right. Call (877) 610-1318 to schedule your free KraftMaid estimate in Arlington.

Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Arlington since 1998.