KraftMaid Construction in Glendale, CA

KraftMaid Construction in Glendale, CA | Barrett & Sons Construction

We’re Barrett & Sons Construction, and we install, reface, and repair KraftMaid cabinetry throughout Glendale. We’re an independent contractor, not a KraftMaid factory service, which means we fix what’s actually broken instead of following a corporate playbook. The thing that sets our KraftMaid work in Glendale apart is simple: we know what these cabinets go through in this city’s hillside fire zones, seismic zones, and 1920s bungalow stock, and we build for it. Call Tom Barrett at (877) 610-1318 to schedule your free estimate.

Call (877) 610-1318

Why Glendale Residents Choose Us for KraftMaid Service

Tom Barrett grew up in the San Fernando Valley, not far from the old stretch of Van Nuys Boulevard where his dad used to take him to watch crews pour foundations on weekends. He learned the trade at Los Angeles Trade-Technical College, starting with framing and finishing with enough hours in the field to know that the job never lies. When it comes to KraftMaid cabinetry, that means we’ve spent over 15 years working with Vantage, Durham, Lexington, and Nantucket lines in kitchens across Glendale. We know which hinges fail, which door edges delaminate, and which drawer boxes split. And because we’re the KraftMaid sales & service crew that actually lives here, we answer our own phone and show up when we say we will.

Common KraftMaid Construction Problems We Solve in Glendale

Here’s what we see week after week in Glendale homes, and how the local climate and housing stock make each one worse:

• Soft-close hinge detents breaking on Vantage and Lexington doors. Glendale’s open-window spring and fall mean doors get swung open and shut constantly. The plastic detents inside those hinges wear down faster than the factory expects, and the door loses its soft-close. We replace the hinge with KraftMaid OEM parts, not a box-store lookalike.
• Adjustable shelf clips cracking in Durham wall cabinets. In Adams Hill and Grandview, many bungalows still sit on original wood-framed cripple-wall foundations that flex with every minor tremor and seasonal soil shift. That movement transfers into the cabinet boxes, and the clips take the stress. We re-secure the cabinet to the studs and swap in new clips rated for that load.
• Thermofoil door edges delaminating on Nantucket styles. Glendale’s Santa Ana days push kitchen temperatures past 110°F in unairconditioned bungalows. The thermofoil peels at the edges. We can’t reverse delamination once it starts, but we reface with factory-matched materials and add edge sealing that holds up better to the heat.
• Dovetail drawer boxes splitting along glue joints. The clay-rich soils in parts of Glendale expand and contract with the seasons. That movement racks cabinet boxes ever so slightly, and older KraftMaid dovetail joints pop. We re-glue, re-clamp, and where needed, add corner reinforcement so the drawer doesn’t end up on the floor.
• Wall cabinets pulling away from unlevel 1930s studs. It’s not a KraftMaid defect. It’s what happens when you hang modern cabinets on walls that haven’t been straight in ninety years. We shim, scribe, and anchor so the doors line up and stay shut.

KraftMaid Service in Glendale: What Local Conditions Mean for Your Equipment

KraftMaid cabinets installed in Glendale’s 91207 and 91208 hillside ZIPs must survive both the Very High Fire Hazard Severity Zone ember-intrusion inspection and the Verdugo Fault’s seismic drift. That’s not true in Burbank or Pasadena. Here’s what it means in practice: we routinely shim, brace, and fire-caulk cabinet backs and toe-kicks that would pass inspection untouched on the flat valley floor. In Verdugo Woodlands, Chevy Chase Canyon, and Montecito Park, any substantial kitchen remodeling in Glendale triggers Chapter 7A review, and the inspector will check wall-cabinet penetrations for ember resistance. We’ve been through that review enough times to know exactly what they look for, and we build it in from the first day of the job. The permit inspector works for you, not for me, so we’d rather have him find nothing to flag.

KraftMaid Models & Products We Service in Glendale

We work on the full current KraftMaid line: Vantage, Durham, Lexington, and Nantucket, plus older models that have been discontinued. When KraftMaid OEM hinges, drawer slides, and fillers are available through our supply network, we use them because the 110-degree opening angle and cup depth are hard to match exactly. For discontinued finishes and older models, we source North American-made aftermarket hardware that matches shear load and reveals. We repair frames and reface doors whenever the cabinet box is square and level, and we only recommend replacement when water damage or structural racking from hillside settlement makes re-leveling too risky. We’ll tell you the truth either way.

KraftMaid Service Pricing in Glendale

FAQs - KraftMaid Construction in Glendale

Service Areas Near Glendale

Most of our KraftMaid work is right here in Glendale, but we also serve homes across the broader Los Angeles area, including Glendale service area neighborhoods like Adams Hill, Grandview, and Kenneth Village. If you’re in Santa Clarita, take a look at our KraftMaid service in Santa Clarita page. Out toward the coast, we cover KraftMaid service in Oxnard too.

Book Your KraftMaid Service in Glendale Today

If your KraftMaid cabinets are sticking, peeling, or pulling away from the wall, call Barrett & Sons Construction at (877) 610-1318. We’ll schedule a free estimate, walk through what’s wrong, and put the scope in writing before any work starts. We’ll do it right the first time, or we’ll come back and make it right.

Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Glendale since 1998.