Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Windows & Doors Across Fort Worth
Window replacement in Fort Worth typically runs $4,500-$15,000, while impact-rated window installation lands between $8,000-$25,000 depending on how many openings and whether the home sits in a historic overlay. Door installation falls inside those same project scopes. We’re Barrett & Sons Construction, and our Windows & Doors team works Fort Worth neighborhoods like Fairmount, Ryan Place, and the Near Southside weekly. Call (877) 610-1318 and Tom or one of his sons will talk through the job with you.
Why Barrett & Sons Construction Is Fort Worth’s Preferred Windows & Doors Company
Tom Barrett founded this company in 1998, and his name is on the truck, the contract, and the work. That matters in Fort Worth, where a lot of homeowners have already been through the phone-quote-then-door-prise routine with an out-of-town outfit. We are not that. Every change order from our crew comes in writing before work begins, and every job carries the 90-Day Done Right Promise. If something is off, Tom comes back and makes it right. One call.
Fort Worth is a city of older homes and tight lots, and our crews know both. We have replaced original double-hung windows in Fairmount bungalows with the City’s preservation officer watching, and we have staged full door replacements on streets with zero side setbacks. That local knowledge keeps permits moving and neighbors calm. Our Fort Worth customers also get the same four standing offers every Barrett & Sons customer gets: $40 off any repair over $200, free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% senior and veteran discount.
Our Windows & Doors Services in Fort Worth
Window Installation
New window installation in Fort Worth is a different job than it is in Arlington or Mansfield, and the reason is the soil. Blackland Clay under most of the city shrinks and heaves several inches between drought and rain. A crew that does not check the rough opening for square before setting the new frame will leave you with sashes that bind and seals that fail within a season. We check the frame, often under the direction of a level on the sill, before we order custom units. That is standard practice for us, not an upgrade.

Door Installation
Door installation on a Fort Worth lot with no side yard means planning where the old door goes, where the new door sits until it goes in, and where the crew parks. That access question changes the quote. We have done front door replacements in 76110 where the staging area was a parking strip eight feet wide, and the job came off without blocking a neighbor’s gate or leaving debris on the sidewalk. Our crew sweeps daily and keeps the path clear for your family and the mail carrier alike.

Window Replacement
Replacing windows on a 1920s craftsman in Fairmount or Ryan Place is not a tear-out-and-pop-in job. If the home is a contributing structure under Fort Worth’s Historic and Cultural Landmarks overlay, the City requires a Certificate of Appropriateness before any exterior work begins. That review covers the muntin profile, the frame material, and the sightlines. We have shepherded dozens of these applications through the preservation office, and we build window packages around what the reviewer will approve. Skip that step and you can end up with a stop-work order and a change order to reframe openings back to the approved dimensions.

Impact Windows & Doors
Fort Worth sits in the core ice-storm belt, and the February 2021 freeze exposed weak building envelope details all over the city. Impact-rated windows and doors, like units from PGT and CGI, protect against flying debris in a severe storm and hold the building envelope together when the temperature drops hard. Impact window installation on a Fort Worth home typically runs $8,000-$25,000, and the permitting path is the same as any structural window change: plan review, inspection at rough-in, inspection after install. We pull permits on every eligible job, and the inspector signs off before we call it done.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fort Worth
We install and service windows and doors from Simonton, Ply Gem, PGT, and CGI, and we keep local stock for common Fort Worth sizes so a replacement sash or a new threshold is not waiting on a truck from out of state. For historic-district jobs, we often work with custom wood units sized to match the original rough openings. The brand matters less than the installation, but you should be able to look up every product we put in your home. You can. We will put the brand and model on your written scope before we order a single unit.
Common Windows & Doors Problems We See in Fort Worth Homes
- Blackland Clay settlement racks frames out of square. Pier-and-beam foundations on Fort Worth’s expansive clay move through the seasons. A window frame that was square in April can be a quarter-inch out by September, and the new sash binds. We check the frame and often recommend beam leveling before we order the glass.
- Historic-district windows replaced without a Certificate of Appropriateness. We see this a lot: a contractor from outside Tarrant County starts work in Fairmount, the preservation officer sees the truck, and the job stops. The homeowner pays to reframe the opening back to approved dimensions. We pull the approval first, every time.
- Zero-lot staging turns into access disputes. Tight Fort Worth lots with no side setback mean your neighbor’s gate is seven feet from your foundation. A crew that blocks that gate stalls the punch list and burns goodwill on the street. We plan the staging before we write the quote, and the access plan goes into the written scope.
- Failed seals and fogged glass from the freeze cycle. The February 2021 freeze pushed old insulated glass units past their limits all over Fort Worth. If you are seeing condensation between the panes, the unit has lost its seal. That is a replacement, not a repair, and we will show you the failed unit before we haul it off.
Pricing for Windows & Doors in Fort Worth, TX
Here is what full window and door work costs in Fort Worth right now, including labor, materials, permits where they apply, and the required inspections. These are line-item ranges, not vague guesses.
| Service | Typical Fort Worth Range |
|---|---|
| Window Replacement | $4,500-$15,000 |
| Impact Window Installation | $8,000-$25,000 |
A single window replacement on a standard ranch in 76112 usually lands near the lower end. A full house of impact-rated windows on a two-story in 76111 can hit the upper end, especially if the openings need reframing or the home sits in a historic overlay that requires custom muntin profiles. Door installation prices follow the same logic. The written quote you get from us is the price you pay, and if the scope changes mid-job, the change order comes to you on paper before the new work starts. Call (877) 610-1318 to schedule a free estimate and get real numbers for your house.
We Also Serve Cities Near Fort Worth
Our Fort Worth crews regularly work the surrounding communities of River Oaks, Forest Hill, Haltom City, and Benbrook. If you are outside the city but still inside Tarrant County, the no trip charge inside the county still applies. For a look at how our windows and doors services compare across the metro, see Windows & Doors in Fort Worth.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Windows & Doors in Fort Worth
Yes, if your home is a contributing structure under Fort Worth’s Historic and Cultural Landmarks overlay and you are changing the exterior appearance of the windows. The Certificate of Appropriateness is a design review that comes before the building permit, and it covers the frame material, muntin profile, and sightlines. We prepare the application with photographs and product details, and we do not order custom units until the review is approved. Call (877) 610-1318 and we will check your property against the overlay map before you spend a dollar.
Blackland Clay under Fort Worth shrinks when it is dry and swells when it rains, and that movement can shift a pier-and-beam foundation by several inches over a single year. If the rough opening is no longer square, a perfectly good window will bind, the sash will not seat, and the seal will fail early. We check the openings with a level during the estimate, and if the foundation needs attention, we tell you before we order glass. That conversation is free, and it can save you a $6,000 mistake.
Yes, and we have done it many times in 76110 and 76104 where the parking strip is the only staging option. The access plan goes into the written quote before we start: where the trailer parks, where old windows pile up, how the sidewalk stays clear, and how long the neighbor’s gate stays unobstructed. If the lot truly has no viable staging, we adjust the schedule and the quote, but we do not start until the plan is on paper. Call (877) 610-1318 to talk through your specific lot.
Fort Worth’s noise ordinance generally restricts construction noise in residential neighborhoods to daytime hours on weekdays, with tighter limits on weekends and evenings. For window and door work, that rarely matters, since we are not running saws all day. But on a tight lot with neighbors six feet away, we schedule the loud work inside the permitted window and let your neighbors know when we will be on-site. A little notice goes a long way, and it keeps the punch list short.
We pull the permit, and the inspector signs off at rough-in and after final installation. If the opening size changes, the permit and plans change with it, and the updated scope comes to you as a written change order before we reframe anything. The permit inspector works for you, not for me, and I want that signature on every job. In a historic district, the Certificate of Appropriateness comes first, then the building permit, then the work. The sequence matters, and we follow it.
Conclusion
Windows and doors in Fort Worth are not a one-size-fits-all job. The soil moves, the historic review process is real, and the lots are tight. The right contractor knows all three. Barrett & Sons has been doing this work since 1998, and Tom’s sons run the crews that show up at your house. Every job is scoped in writing, permitted properly, and backed by the 90-Day Done Right Promise. Call (877) 610-1318 today for a free estimate and a quote you can check against the actual work.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Fort Worth since 1998.







Before
After
Before
After
Before
After