Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterFast, Reliable Windows & Doors Across Bonita Springs
Window and door work in Bonita Springs comes with a specific set of rules that most contractors never mention until the inspector shows up. Between Hurricane Ian’s aftermath, FEMA’s 50% substantial damage threshold, and salt air that eats standard hardware in five years, a simple window swap can spiral into a full elevation rebuild if you hire the wrong crew. We’ve been navigating Lee County’s post-Ian permitting maze since the day it started, and Tom Barrett’s sons run every job personally. Call (877) 610-1318 for a free estimate, and we’ll tell you upfront what your home actually needs.
Why Barrett & Sons Construction Is Bonita Springs’s Preferred Windows & Doors Company
Tom Barrett founded this company in 1998, and his name is still on every contract. He lives twenty minutes from Bonita Springs, and when homeowners in 34135 tell us about their Ian-damaged windows, we know exactly what they’re up against before we even see the property. Our crew members are background-checked and wear the Barrett & Sons name on their uniforms, not some subcontractor’s logo. When you call, a live person answers, 24/7. No out-of-state call center.
Bonita Springs homeowners have a right to be skeptical. Too many national outfits quote one number on the phone and hand over a different bill at the door. We do the opposite. Every price change arrives as a written change order before any work starts. Every permit gets pulled, every inspection gets signed. And every job carries our 90-Day Done Right Promise in writing. If it’s not done right, Tom comes back. One call.
Our Windows & Doors Services in Bonita Springs
Our Windows & Doors team handles everything from single-window replacements to full-house hurricane hardening. Here’s what we do most often in Bonita Springs:
Window Installation
Most Bonita Springs homes fall into one of three construction eras, and each needs a different spec. The pre-Andrew code ranch homes in older inland sections still have single-pane aluminum frames that leak air and fail wind-load tests. Mid-1990s transitional builds in communities like Pelican Landing and Bonita Bay need retrofitted anchors. Post-2002 homes are usually closer to code but often got builder-grade glass that underperforms in a Cat 3 storm. We match the installation method to the house, not the other way around.
Door Installation
Salt air is brutal on door frames in Bonita Springs. Standard zinc-plated hinges and thresholds pit and seize within five years near the Imperial River and along the canal network. We spec stainless steel hardware and marine-grade flashing on every exterior door install, because the cheap inland version simply doesn’t survive here. That’s not an upsell. That’s just what coastal Florida requires.
Window Replacement
A window replacement in Bonita Springs typically ranges from $4,500 to $15,000 depending on count, frame material, and whether you’re going impact-rated or standard insulated glass. But here’s what the big-box stores won’t tell you: if your home has FEMA substantial damage history from Ian, swapping those single-pane units for impact windows can push your project over the 50% threshold. That means a full elevation-compliant rebuild is legally required. We identify that risk before we quote, so you don’t find out from the county assessor after demo day.
Impact Windows & Doors
Impact-rated windows and doors are the smartest investment you can make in a Bonita Springs home, but the spec matters more than the sticker. We install Simonton, PGT, and CGI products, all of which meet current Florida Building Code wind provisions. In 34134 and 34135, many homes sit in FEMA AE and VE flood zones, so the rough-in, flashing, and header work has to be done to flood-resistant standards too. Two different code requirements, one job. We handle both.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Bonita Springs
We install and service Simonton, PGT, CGI, and Ply Gem products across all four Bonita Springs ZIP codes: 34133, 34134, 34135, and 34136. Because our crews work this area every week, we keep local stock of common impact window sizes and marine-grade door hardware, which means faster turnaround when a storm takes out a pane or two. You can look up every brand we install. No mystery materials off a van.
Common Windows & Doors Problems We See in Bonita Springs Homes
- Salt-air corrosion on hardware: Standard zinc-plated window operators and sliding door rollers start pitting within five years of exposure to Bonita Springs’s coastal air. The result is stuck sashes, failed seals, and handles that snap off in your hand. We replace the hardware, not just the glass.
- Stucco cracking around newly installed impact windows: Low-elevation CBS slabs in 34135 settle over time, transferring stress to window corners. If the rough-in wasn’t reinforced, the stucco cracks and breaks the weather barrier. We see this on homes that had windows installed just a few years ago by contractors who skipped the corner reinforcement.
- Water intrusion around patio door rough-ins: DIY caulk joints on sliding door frames fail after one hurricane season of thermal movement and wind-driven rain. Water finds the subfloor, then the rot begins. By the time a homeowner notices the soft spot, we’re often replacing the subfloor and the door.
- Failed seals on single-pane aluminum frames: The 1970s-era ranch homes concentrated in older inland sections still have original single-pane windows with degraded glazing seals. They fog up, they leak conditioned air, and they’re the first thing a wind inspector flags after a storm.
Pricing for Windows & Doors in Bonita Springs, FL
Here’s what you can expect to pay in the Bonita Springs market:
| Service | Typical Range in Bonita Springs |
|---|---|
| Impact Window Installation | $8,000 - $25,000 |
| Window Replacement | $4,500 - $15,000 |
The coastal-spec version of any window or door job runs higher than an inland quote because the materials are fundamentally different. Stainless steel hardware, marine-grade flashing, flood-resistant rough-ins, and impact-rated glazing all cost more than builder-grade zinc and standard insulated glass. The cheap inland quote will save you money today and cost you a full rebuild within a decade. That’s not a scare tactic. It’s what we see on Ian-era homes every single week. We offer free estimates with written line-item pricing, no trip charge inside Lee County, and a free second opinion on any written estimate you bring us. Call (877) 610-1318 to schedule yours.
We Also Serve Cities Near Bonita Springs
Our crews work Bonita Springs and the surrounding communities every week. That includes Estero, Naples Park, Pelican Bay, and San Carlos Park. If you’re in one of those areas and need window or door work done, call (877) 610-1318 and we’ll get you on the schedule. No trip charge inside Lee County.
Serving Bonita Springs, FL - Our Local Coverage Area
We’re based in the Bonita Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Windows & Doors in Bonita Springs
The FEMA 50% substantial damage threshold means that if the total cost of repairs to your home exceeds 50% of its pre-storm market value, you must bring the entire structure into compliance with current Florida Building Code, including flood elevation requirements. In Bonita Springs, many Ian-damaged homes are hovering right at that line, and a full window replacement can be the item that pushes you over. If your home in 34135 or 34134 was flagged by Lee County assessors as substantially damaged, call (877) 610-1318 before you sign any window contract. We’ll tell you what the threshold means for your specific house, and whether your window project triggers a bigger scope.
For Bonita Springs coastal exposure, marine-grade aluminum with a factory-applied finish or high-quality vinyl with stainless steel hardware outperform standard aluminum and wood. Standard zinc-plated hardware corrodes within five years in the salt air along the Imperial River corridor. We spec stainless steel operators, locks, and hinges on every coastal install, because that’s what actually survives here. Call (877) 610-1318 and we’ll show you the difference in person.
Yes, impact window replacement in Bonita Springs requires a permit, and in HOA communities within 34133 you may also need architectural review approval before work begins. Lee County’s post-Ian permitting queue can add time to the process, so start early. We pull permits on every eligible job, and we’ll coordinate with your HOA’s requirements too. The inspector works for you, not for us. That’s why we like him. Call (877) 610-1318 for a free estimate that includes the permit timeline.
In most cases, no. Impact-rated windows are designed as a system: the frame, the glazing, and the anchoring all work together. If the glass is damaged, the frame and anchoring often need inspection too, and a partial fix usually voids the manufacturer’s rating. After storms pass through Bonita Springs, we see homeowners try to save money by swapping just the pane, only to find their window no longer meets wind-load code. Call (877) 610-1318 and we’ll tell you honestly whether a glass-only repair is code-compliant for your specific window.
Because the materials are not the same thing. A coastal-spec window job in Bonita Springs uses stainless steel hardware, marine-grade flashing, flood-resistant rough-in details, and impact-rated glazing tested to current Florida Building Code wind provisions. An inland quote usually means standard zinc hardware, builder-grade flashing, and standard insulated glass. The cheap spec fails within a decade in Bonita Springs salt air, and after Ian, code enforcement is not forgiving. Call (877) 610-1318 for a written line-item quote so you can see exactly what you’re paying for, and what you’re not.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Bonita Springs and the surrounding Lee County communities.