Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Roofing Across Taylor
Roof repair in Taylor runs about $400 to $1,800, while a full roof replacement on a typical home here falls between $8,000 and $20,000. Those numbers shift based on what’s actually going on under the shingles, which in Taylor usually means clay movement, poor attic ventilation, or decades of deferred maintenance. We work on homes all over 76574, from Heritage Square to the new subdivisions going up on former farmland. Call (877) 610-1318 and we’ll come take a look, walk the roof with you if you want, and put the scope in writing before anything gets torn off.
Why Barrett & Sons Construction Is Taylor’s Preferred Roofing Company
Tom Barrett founded this company in 1998 and still answers his own phone. When you call about a roof in Taylor, you’re not getting a national outfit’s call center. You’re getting someone who has crawled through attics off Carlos G. Parker Boulevard and knows what Blackland Prairie clay does to a roof system over twenty or thirty years. We’ll tell you what we find, show you photos if you want them, and never ask you to sign for work you don’t understand.
Our crew members carry the Barrett & Sons name, and Tom’s sons run the crews. If something isn’t done right, the 90-Day Done Right Promise says one call brings Tom back to make it right. That’s on every contract, in writing, not buried in fine print. People in Taylor have been burned by contractors who quote one price on the phone and show up with another. We don’t work that way. Every price change arrives as a written change order before any work happens.
Permits get pulled on every eligible roof job, and inspections get signed. The permit inspector works for you, not for me. That’s why I like him. We’ve replaced roofs all over Taylor, from the older pier-and-beam homes near downtown to the early-2000s ranches off FM 1660. You’ll see our trucks at the hardware store on Main Street, and Tom lives twenty minutes away. If something’s wrong, he wants to know about it.
Our Roofing Services in Taylor
Our Roofing team handles everything from small leak repairs to full tear-offs and standing seam metal installations. Here’s what we do most often for Taylor homeowners.
Roof Repair
Most roof repairs in Taylor start with a leak that shows up as a water stain on a ceiling or water tracking down a fascia board. On pier-and-beam homes, the real cause is often the clay shifting the perimeter walls until the roof-to-wall connection cracks, letting water in without any visible shingle damage. We trace the leak to its source before we quote the repair, because patching the obvious spot without fixing what caused it just means you’ll call us again next spring. Typical repairs run $400 to $1,800 depending on what we find once we’re up there.

Roof Replacement & Installation
A full roof replacement in Taylor runs $8,000 to $20,000 depending on the roof’s square footage, pitch, how many layers we’re tearing off, and what’s underneath. Older homes in Taylor frequently need decking replacement once the old shingles come off, and that’s exactly the kind of thing we price into the contract as a written allowance before work starts. You’ll know the allowance number up front. If we use less, you pay less. If we need more, you approve the change order before we buy a single sheet of plywood.

Metal Roofing
Metal roofs make a lot of sense on Taylor homes, especially given how our hot, humid springs and 100-degree summers cook conventional shingles. A standing seam metal roof reflects more heat and handles the thermal cycling better than composition shingles, but it’s a bigger investment at $15,000 to $40,000 for a typical Taylor home. We install both screw-down and standing seam systems, and Tom will walk you through the difference honestly, including the ventilation upgrades older attics usually need to make a metal roof perform the way it should.

Tile Roofing
Tile roofs on Taylor’s older brick homes, particularly in the historic districts, develop a specific failure pattern around chimneys and dormers. The mortar that originally held the flashing in place cracks as the black clay moves beneath the foundation, and decades of that movement eventually lets water through without breaking a single tile. Tile roof repair runs $600 to $2,500 in Taylor, and we can usually spot-repair the affected section rather than replace the whole roof, as long as the tiles themselves are still sound.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Taylor
We install GAF composition shingles on most Taylor replacements because they hold up well in Central Texas heat and the warranty is straightforward to claim if something ever goes wrong. For metal work, we use GAF’s metal roofing lines as well, and we can source tiles and flashing components that match what’s already on your home. Because we’re running crews to Taylor every week, we can keep commonly needed parts on hand rather than making you wait on a distributor’s shipping schedule. If a supplier is backordered, we’ll tell you on the front end and put that timeline in writing rather than promising a date we can’t hit.
Common Roofing Problems We See in Taylor Homes
- Clay movement cracking roof-to-wall connections. Taylor sits on Blackland Prairie clay that swells after rain and cracks during summer drought. On pier-and-beam homes, the perimeter walls shift enough to crack the rigid connection where the roof meets the wall. Water gets in, tracks down the fascia, and by the time you see the stain, the leak has been active for weeks.
- Builder-grade shingles failing early from poor attic ventilation. Early-2000s ranch homes across Taylor got entry-level composition shingles and minimal attic ventilation. The result is granule loss and curling tabs by year 15 or sooner. When we replace these roofs, proper ridge and soffit venting goes into the scope so the new shingles actually last their rated life.
- Mortared-in flashing failing on 1920s brick homes. Older brick homes in Taylor, especially those near Heritage Square, often have chimney and dormer flashing that was originally set in mortar instead of metal. Decades of clay movement crack the mortar, and water enters the roof system without any visible shingle damage. We see this constantly on homes built before 1950.
- Shifting roof framing loosening decking fasteners. Taylor’s Blackland Prairie clay expands and contracts so aggressively that roof framing over unconditioned attics can shift seasonally, loosening decking fasteners and causing nails to back out. You’ll hear creaking in the attic on windy days, and the decking eventually pulls loose from the rafters. This failure pattern is measurably more common here than in the Hill Country’s rocky soils 30 miles west.
Pricing for Roofing in Taylor, TX
Here’s what honest roof work costs in Taylor right now. These ranges reflect what we’re quoting on homes across 76574, from the older pier-and-beam stock near downtown to the new builds on the north side.
| Service | Typical Range in Taylor |
|---|---|
| Roof Replacement | $8,000 - $20,000 |
| Roof Repair | $400 - $1,800 |
| Metal Roof Installation | $15,000 - $40,000 |
| Tile Roof Repair | $600 - $2,500 |
What moves the price on a Taylor roof replacement? Square footage, roof pitch, number of existing layers, whether the decking needs to be replaced once we tear off, and what type of shingle or metal system you choose. On older homes, code upgrades to framing and ventilation are common once the roof is opened, and we handle those as written allowances in the contract, never as a surprise at the end. Call (877) 610-1318 for a free estimate. We’ll give you a written line-item quote before you commit to anything.
We Also Serve Cities Near Taylor
Our crews work throughout northeastern Williamson County, so if you’re in Taylor proper or the surrounding area, we can help. We regularly run jobs in Hutto, Round Rock, Pflugerville, and Elgin. If you’re anywhere in that radius, call (877) 610-1318 and we’ll get you on the schedule.
Serving Taylor, TX - Our Local Coverage Area
We’re based in the Taylor area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Roofing in Taylor
Clay movement affects your roof by shifting the structure beneath it. Taylor’s black clay swells after rain and shrinks during drought, and on pier-and-beam homes that means the perimeter walls move slightly. That movement cracks the rigid connection where the roof meets the walls, loosens decking fasteners, and can crack mortar-set flashing on older brick homes. Your shingles can look perfectly fine while water is getting in around the edges. If you have ceiling stains, attic creaking, or water tracking down the fascia, call (877) 610-1318 and we’ll trace it to the source.
For a full roof replacement in Taylor, plan on booking 6 to 10 weeks out. The Samsung project has absorbed so much of the local subcontractor labor that schedules which used to be two to four weeks out now run into months. That’s why we recommend calling before your roof is in crisis, not after. For emergency leak repair, we’ll work you in sooner. Call (877) 610-1318 and we’ll give you a straight answer on current lead times.
Possibly, and that’s exactly why we write allowances into the contract before we start. If your older home has undersized rafters, inadequate decking, or no ice and water shield where current code requires it, the inspector may require us to bring those elements up to code during a replacement. We handle this by pricing a written allowance into your contract up front. If the upgrades aren’t needed, you don’t pay that allowance. If they are, you approve the exact dollar amount in writing before we do the work. No surprises at the end. Call (877) 610-1318 to schedule a free estimate and we’ll talk through what your specific home is likely to need.
In most cases we can repair just that section. The failure is almost always the mortared-in flashing around the chimney, which cracks as the clay moves beneath your foundation, rather than the tiles themselves. Tile roof repair in Taylor runs $600 to $2,500 depending on how much flashing needs to be replaced and whether any surrounding tiles were damaged. We’ll inspect the full roof while we’re up there and tell you honestly whether the rest of it has life left. Call (877) 610-1318 for an inspection.
No, you don’t need one, but it’s worth considering. Most new-build homes in Taylor’s northern subdivisions come with builder-grade composition shingles that meet code but won’t win any longevity awards in Central Texas heat. A standing seam metal roof costs more up front at $15,000 to $40,000, but it handles thermal cycling better and sheds heat more efficiently. The real question is whether the home’s framing and sheathing were designed for metal’s weight and expansion characteristics. We’ll assess that and give you an honest recommendation. Call (877) 610-1318 to schedule a free estimate.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Taylor since 1998.







Before
After
Before
After
Before
After