Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Bathroom Remodeling Across Anderson Mill
A full bathroom remodel in Anderson Mill typically runs $9,000 to $28,000, with walk-in shower installations falling between $4,500 and $12,000. That’s the honest range we quote here at Barrett & Sons Construction, because the number depends on what’s hiding behind your 1980s drywall: galvanized pipes, aluminum wiring, or a slab that’s shifted over four decades of wet-dry clay cycles. We’ve been remodeling bathrooms in Anderson Mill long enough to know which side of the street sends your permit to Georgetown and which sends it to Austin. Call (877) 610-1318 and Tom or one of his sons will walk your bathroom with you, no charge for the estimate.
Why Barrett & Sons Construction Is Anderson Mill’s Preferred Bathroom Remodeling Company
Barrett & Sons is the name-on-the-truck alternative, founded in 1998 and still owner-operated by Tom Barrett. When you call, a live person answers, not a call center. We schedule around Anderson Mill every week, so our crews know the streets from Zeppelin Drive to the older sections off Lake Creek Parkway. Homeowners here have told us plenty of stories about national outfits that quoted one number on the phone and handed them a different invoice at the door. That’s the business model we don’t follow. Every scope change at your Anderson Mill home arrives as a written change order before work starts, and every completed job carries our written 90-Day Done Right Promise: if it’s not right, one call brings Tom back.
We carry state licensing and insurance, and Tom publishes his name, address, and license number so you can verify before signing anything. Ask anyone in the 78729 zip code about us, look up the license yourself, or check our standing offers: $40 off any repair over $200, a free second opinion on any written estimate, and no trip charge inside the county. Seniors and veterans get a permanent 10% discount. We’re not the cheapest bid in Anderson Mill, and we don’t try to be. We’re the bid that stands behind itself when the inspector walks in.
Our Bathroom Remodeling Services in Anderson Mill
Full Bathroom Remodeling
A full bathroom remodel in Anderson Mill means opening walls, replacing tubs or showers, updating all plumbing and electrical, and finishing with tile, vanities, and fixtures. In homes off Lake Creek Parkway and around Spicewood Springs, we’re commonly replacing original galvanized copper supply lines and swapping out 1970s-era fixtures that predate modern flow standards. What we scope before quoting is always the same: what’s behind the walls, what the county wants in writing, and whether the slab needs reinforcement before tile goes down. We don’t guess, and we don’t hand you a bill for what we guessed wrong later.
Walk-In Showers & Shower Remodeling
Walk-in shower installations in Anderson Mill run $4,500 to $12,000, and they’re one of the most common upgrades we do in the ranch and split-level houses built between 1976 and 1988. The real issue here is slab movement. Anderson Mill sits on that transition zone between the Blackland Prairie’s expansive Vertisol clay and the limestone karst of the Hill Country, so slabs heave and settle with the wet-dry cycles. A new shower pan cracked within two wet-dry cycles is a real failure we’ve seen from contractors who skipped a geotech review. We don’t skip it. If the slab needs reinforcing before we set the pan, it goes in writing before we touch the floor.
Tub-to-Shower Conversion
A tub-to-shower conversion in Anderson Mill costs between $3,500 and $10,000, depending on whether we’re moving the drain line and what we find under the tub. In this neighborhood’s post-tension concrete slabs, relocating a drain across shallow caliche can turn into expensive trenching, so we include that line item up front when it’s needed. Many homeowners here want a curbless or low-threshold shower for aging in place, which means coordinating the subfloor slope with the existing slab. We’ve done that in the older single-story brick homes and in the split-levels off Zeppelin Drive. The process works, but it takes coordination with the county permit office, not just a sledgehammer.
Vanities, Tile & Fixtures
Vanity installation in Anderson Mill runs $800 to $3,000, tile work scales with square footage, and fixtures range widely depending on brand. We stock and install brands like Grohe and Sterling because they’re lines you can look up and verify, not mystery off a van. In a house where the original finish is 45 years old, these pieces matter more than people expect. A poorly set vanity on an uneven slab will lean, a badly floated tile will crack, and a low-quality valve will fail inside a wall. We set everything straight and test it before the final walkthrough.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Anderson Mill
We install products from Schluter for waterproofing and drain systems, Grohe for fixtures, and Sterling for tubs and shower bases. These are named brands with published specifications and real warranty support, which matters when you’re spending five figures on a bathroom that should last another 30 years. We keep common parts accessible for our Austin-area schedule serving Anderson Mill, so if a fixture fails during the warranty period, we’re not waiting six weeks on a backorder while your bathroom sits half-finished.
Common Bathroom Remodeling Problems We See in Anderson Mill Homes
- Wrong jurisdiction permits. Because Anderson Mill straddles unincorporated Williamson and Travis counties, a contractor who pulls a city of Austin permit by mistake for a Williamson County parcel triggers a stop-work and a ripped-out rough-in. We’ve seen it. We verify jurisdiction block-by-block before we file anything.
- Slab heave cracking new shower pans. The Vertisol clay under Anderson Mill expands and contracts through wet-dry cycles. If a shower pan is set directly on an unreinforced slab, it cracks. We run geotech assessments on anything foundation-adjacent and write the remediation into the scope.
- Hidden electrical and plumbing surprises. Original aluminum wiring and undersized panels show up regularly in late-1970s and early-1980s homes here. A bathroom remodel that adds outlets, lighting, or a heated floor can require a panel upgrade before the county signs off. We flag it early, not after the walls are open.
- Buried change orders for trenching. Shallow caliche and limestone bedrock make trenching for drain lines far more expensive in Anderson Mill than in the sandier soils east of I-35. A cheap quote that doesn’t include the trenching line item becomes a surprise upcharge on the final punch list. Our quotes include it in writing when it’s needed.
Pricing for Bathroom Remodeling in Anderson Mill, TX
| Scope | Anderson Mill Price Range |
|---|---|
| Bathroom Remodel | $9,000-$28,000 |
| Walk-In Shower Installation | $4,500-$12,000 |
| Tub-to-Shower Conversion | $3,500-$10,000 |
The county permit cost and any geotech review are line items we add only when required, and we’ll tell you exactly why they’re there before you sign. You don’t pay for a surprise later. Call (877) 610-1318 for a free estimate and we’ll scope the job in writing before you commit.
We Also Serve Cities Near Anderson Mill
We work in Jollyville, Brushy Creek, Cedar Park, and Wells Branch, plus throughout Anderson Mill. Since we’re scheduling and coordinating from our Austin office with crews local to the area, reaching these nearby communities is a short drive. If you’re in Anderson Mill and want Bathroom Remodeling done right, we’re the crew to call.
Serving Anderson Mill, TX - Our Local Coverage Area
We’re based in the Anderson Mill area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Bathroom Remodeling in Anderson Mill
How do I know if my Anderson Mill bathroom remodel needs a Williamson County or Travis County permit?
You need to verify which county your parcel falls under, because Anderson Mill straddles both jurisdictions and the wrong permit triggers a stop-work order. We check this block-by-block before we file anything, so the permit goes to the right office the first time. Call (877) 610-1318 and we’ll verify your address.
Does a tub-to-shower conversion in Anderson Mill require a geotechnical report?
In most cases, yes. Because Anderson Mill sits on expansive Vertisol clay that shifts through wet-dry cycles, any work touching the slab triggers a geotech review before we set a new shower pan. We include this in the scope in writing when it’s required. Call us for a quote specific to your home.
Why did my Anderson Mill bathroom remodel quote include a line item for electrical panel replacement?
Original aluminum wiring and undersized panels are common in late-1970s and early-1980s Anderson Mill homes, and the county often requires the panel be upgraded before our rough-in can pass inspection. We flag it in the quote so there’s no surprise on the final bill.
How does the permit timeline in Georgetown affect my bathroom remodel schedule?
For unincorporated Williamson County parcels in Anderson Mill, permits are filed in Georgetown rather than Austin or Cedar Park, which typically adds three to five business days to the schedule before demolition can start. We build that into our timeline up front so you know when each phase starts.
What is the price range for a small bathroom remodel in Anderson Mill?
A small bathroom remodel in Anderson Mill, typically a powder room or compact secondary bath, runs $5,000 to $12,000. The actual number depends on finish choices and what we find behind the walls. Call (877) 610-1318 for a free, written estimate.
Call Barrett & Sons for Bathroom Remodeling in Anderson Mill
We’ve remodeled bathrooms on Zeppelin Drive and throughout the older tract sections of Anderson Mill. We recently pulled a permit out of Georgetown for a split-level primary bathroom where the original galvanized supply lines and an undersized panel had to be replaced before the rough-in could pass. We planned for it, priced it in, and the bare studs didn’t stall the job. That’s the difference between a company that files permits every week in Williamson and Travis counties and one that hands you a name and a number.
If you want your bathroom remodeled without the surprise change orders and delayed inspections, call (877) 610-1318. Ask for a free estimate. Tom or one of his sons will walk the space with you. What we quote is what you’ll pay, and the 90-Day Done Right Promise is written into every contract. Not in fine print. Right on the page.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Anderson Mill and the surrounding area.







Before
After
Before
After
Before
After