Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterFast, Reliable Roofing Across Burbank
Roof replacement in Burbank typically runs $8,000 to $20,000 for a standard composition re-roof, while full standing seam metal runs $15,000 to $40,000, and targeted repairs land between $400 and $1,800. Those numbers reflect Burbank’s specific demands: FAA height ceilings, Title 24 cool-roof rules, and corrosion patterns you won’t find in Glendale. Our crews work Burbank weekly, know the plan-check quirks in 91505 through 91508, and pull permits on every eligible job. Call us at (877) 610-1318 for a free estimate, and we’ll send someone who actually knows the Verdugo foothill wind patterns and what they do to a ridge cap.
If you’ve lived in Burbank long enough, you’ve seen it: a roof that looked fine in January is lifting tiles by September. The salt-tinged inversion air that settles against the Verdugo foothills eats standard galvanized fasteners from the inside out. That’s not a generic “weather damage” story. It’s a Burbank-specific failure mode, and it decides which materials we spec on every roof we touch here.
Why Barrett & Sons Construction Is Burbank’s Preferred Roofing Company
Tom Barrett started Roofing work in 1998, and he put his name on the truck because he planned to stand behind every job. His sons run the crews. That means when a Burbank homeowner calls about a leak two years after we finish, the person who answers the phone is someone who might have been on that very roof. We don’t dispatch strangers.
Burbank homeowners between 50 and 70 have usually been burned once already: a national outfit quotes one number on the phone, shows up with a different number at the door. We’ve heard those stories over and over in the 91505 corridor and up in the hills above North Hollywood. That’s why every scope, every allowance, every price change arrives as a written change order before a single nail moves. The permit inspector works for you, not for me, and we like it that way. Look up the license number yourself; Tom publishes his name and address.
Our crews live in the broader Los Angeles area and work Burbank every week. We know that a roof on a 1950s ranch off North Lincoln Street hits 108°F by 2 p.m. in July, and we know which underlayments delaminate on that south slope. We don’t guess. We’ve seen it.
Why Your Neighbors Call Us Back
We answer the phone live, 24/7. Not a voicemail box, not an out-of-state call center. When a Burbank homeowner has water coming through the ceiling at 10 p.m., they talk to a person who can help. And every job carries the 90-Day Done Right Promise, written on the contract: if it’s not done right, Tom comes back and makes it right, one call.
Our Roofing Services in Burbank
Roof Repair
Burbank’s repair calls cluster around two things: corroded flashing and cracked tile. Standard zinc-plated fasteners fail early in the Verdugo foothill inversion air, and when they let go, tiles lift and shingles tear off on exposed slopes. We replace failing hardware with marine-grade stainless fasteners and rebuild boots, collars, and step flashing to last. A typical repair runs $400 to $1,800 depending on how far the corrosion has spread. Call (877) 610-1318 and we’ll put eyes on it.
Roof Replacement & Installation
A full replacement in Burbank isn’t a simple tear-off. The FAA Part 77 airspace surfaces over the 91505 corridor cap building heights as low as 35 to 40 feet, which limits roof pitch and total rise on many residential lots. We engineer low-profile, Title 24 cool-roof assemblies that keep your peak under the ceiling while still venting properly. GAF composition systems and GAF underlayments are our go-to when the design calls for it. Replacement runs $8,000 to $20,000 for standard composition work.
Metal Roofing
Standing seam metal is growing in Burbank for one reason: it survives the heat and the salt air better than almost anything else. We’ve installed standing seam systems with stainless steel fasteners on ranches and bungalows across 91506 and 91507, and we spec a Title 24 cool-roof profile so the surface reflects the worst of the Valley heat instead of cooking your attic. Metal roof installation runs $15,000 to $40,000 depending on profile and panel gauge.
Tile Roofing
Barrel tile is Burbank’s signature look, especially on the post-WWII ranch stock that dominates the city. The problem: unvented original 2×4 rafter roofs buckle under 105°F attic heat, cracking tiles and opening capillary gaps at the ridge cap. We repair those failures with proper ridge ventilation and cool-roof underlayment, and we replace full tile roofs when the underlayment has delaminated beyond repair. Tile roof repair runs $600 to $2,500; full barrel tile replacement runs $8,000 to $20,000 with cool-roof underlayment.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Burbank
We install GAF composition and underlayment systems because Burbank homeowners can look up the brand, read the spec sheets, and verify the warranty without taking our word for it. We keep common GAF colorways and accessory components stocked in our Los Angeles warehouse so Burbank jobs don’t stall waiting on a shingle order. Named brands, written on the estimate, verifyable before we start. That’s how Tom has run the company since 1998.
Common Roofing Problems We See in Burbank Homes
- Salt-corrosion on standard fasteners: The inversion layer that settles against the Verdugo foothills carries airborne salt, and standard zinc-plated nails rust out in 8 to 10 years on exposed slopes. When they fail, tiles lift and shingles blow off in late-summer wind events. We replace with marine-grade stainless, every time.
- Unvented ranch roofs buckling under heat: Original post-WWII ranch homes with 2×4 rafters and no continuous ridge ventilation hit 105°F attic temperatures in July and August. That heat cracks barrel tiles and delaminates felt underlayment on south-facing slopes. We add mechanical or passive ventilation on nearly every re-roof.
- Fire-zone ember intrusion: Parcels up against the State Responsibility Area get flagged during plan-check for ember intrusion through box vents and composition shingles. Burbank’s Building & Safety Division requires retrofits to Vulcan vents and Class A materials before sign-off. We handle that on the permit set.
- Chimney flashing around patched repairs: We tear off a lot of 1950s cedar shake roofs that had been patched around the chimney two or three times. The real failure is usually hidden: rusted fasteners and delaminated underlayment along the south slope, not the visible shingle damage.
Pricing for Roofing in Burbank, CA
Burbank’s roof pricing isn’t the same as Van Nuys or Pasadena, because the FAA height ceilings and Title 24 cool-roof rules change what we can install and how we engineer it. Here’s what we quote, in writing, before any work starts:
| Job | Burbank Price Range |
|---|---|
| Standing seam metal roof with marine-grade stainless fasteners | $15,000-$40,000 |
| Barrel tile roof replacement with cool-roof underlayment | $8,000-$20,000 |
| Roof repair for salt-corroded flashing and fastener replacement | $400-$1,800 |
A free estimate from us includes a written line-item scope, brand names, and the exact hardware spec we’ll use. No allowances left vague, no price changes without a change order in writing. Call (877) 610-1318 and we’ll walk the roof with you.
We Also Serve Cities Near Burbank
While this page was written for Burbank specifically, our crews also serve Universal City, North Hollywood, Glendale, and Studio City. If you’re in one of those communities and need Roofing in Burbank-grade work, call us at (877) 610-1318 and we’ll get you on the schedule.
Serving Burbank, CA - Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Roofing in Burbank
The height limits apply to any structure modification that changes the roofline, including a roof replacement if the new assembly raises the peak. In the 91505 corridor, ceilings as low as 35 to 40 feet mean a standard truss bump may not be allowed, and a height-impact study can be required during plan-check before permits are pulled. We handle that study on eligible jobs. Call (877) 610-1318 and we’ll tell you whether your parcel falls in the affected zone.
Burbank sits in a heat-trapping eastern San Fernando Valley pocket with an inversion layer off the Verdugo foothills that settles salt-laced air over residential neighborhoods. Standard zinc-plated fasteners corrode in 8 to 10 years on exposed slopes, while Glendale’s slightly different microclimate doesn’t cause the same airborne salt concentration. We spec marine-grade stainless fasteners because we’ve torn off too many roofs where the nails were the only thing that failed. Call (877) 610-1318 for an exact quote.
Title 24 requires cool-roof materials on many Burbank re-roofs, meaning shingles or metal panels that reflect more solar heat than they absorb. Burbank’s summer temperatures routinely hit 100°F to 108°F, so a cool roof cuts attic heat, reduces cooling costs, and prevents the delamination we see on south slopes. We spec GAF cool-roof-rated composition or standing seam metal with a reflective profile. Estimates are free at (877) 610-1318.
Yes. Burbank parcels in State Responsibility Area Fire Hazard Severity Zones face additional plan-check review for ember intrusion and Class A exterior assemblies. Box vents and standard composition shingles often get flagged, and retrofits to Vulcan vents and fire-rated materials are required before inspection sign-off. We pull permits and manage the fire-zone compliance on every eligible job. Call (877) 610-1318 and we’ll check your parcel.
A coastal-spec roof using marine-grade stainless fasteners and cool-roof underlayment typically adds 10% to 18% to the materials cost versus standard inland-spec materials. On a standing seam metal roof, that’s the difference between $15,000 and $17,700 on the low end. It’s worth it because the inland-spec zinc fasteners fail in 8 to 10 years in Burbank, meaning you’d pay for a second replacement within a decade of the first. Call (877) 610-1318 and we’ll quote both specs side by side.
Written by Tom Barrett, Owner at Barrett & Sons Construction, serving Burbank and the San Fernando Valley since 1998.